WBPWD/EE/KNHED/e-NIQ-72/25-26

Supply, Installation, Testing of Extension of existing Cubical type floor mounted LT panel matching with dimension(Size-(Length) 800 mm X(depth)1000 mm X(Height) 2100 mm) comprising of the following electrical accessories fabricated from 40x40x5 mm MS angle and 14 SWG CRC sheet with necy. make sure that back side cable entry with baklite seperation between busbar and cable entry same as a existing panel, Based on 'C' channel size(75X30 mm), Earthing arrangement, Welding incl. painting with 2 coats of synthetic Enamel paint over 1 coat of RO primer. INCOMMER:- On existing incomming source connect with extension of existing bus bar Aprox double size of (900 mm X 100 mm X10 mm) X2 copper bus bar including nut bolts and other necsy. connection.

OUTGOING:- a) S&F415 V 630 A TPN SFU open execution type (Schneider/ABB/Siemens) with 3 nos. Din type fuse link (Make:- Schneider/ABB/Siemens) with open execution type in SS enclosure/cubical with nuts bolts -2 nos. BUSBAR INTERCONNECTION: Inter connection to be made same with 60 x 10 mm copper bar in between 2 no Main switchs & bus bar.

S & laying of 4 Core 300 Sqmm (Al/Ar) Cable on wall/ surface with saddles/clamps incl S& F of MS saddles with earthing arrangement in 10 SWG Gi Hot dip wire making holes etc as necy mending good the damages and painting.( make:Gloster/Polycab/havells)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :4 core 300 sq. mm cable

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :[7/F-4] 4 Core 300 Sqmm

(Rate should be quotated including all taxes and duties)