REPAIRS TO INTERNAL ELECTRIFICATION AND EXTERNAL ELECTRIFICATION, STREET / LED LIGHT, DISTRIBUTION BOX, FEEDER PILLAR AT AKASH VIHAR AND SDI UNDER GE (AF) MARATHAHALLI BANGALORE.

Amount

Taking down carefully Unserviceable Copper / Aluminium Point Wiring of any type batten or conduit, surface or concelaed (Light, Fan, Socket or power) complete including removing material from site and making good the disturbed surfaces of walls, roofs etc to match the existing Complete all as specified and as directed. (Note: Taking down of Fittings and Fixtures shall be measured under respective Items Separately).

Taking down carefully Unserviceable Sub main wiring of any size and type batten or conduit, surface or concelaed including removing material from site and making good the disturbed surfaces of walls, roofs etc to match the existing Complete all as specified and as directed. (Note: Taking down of Fittings and Fixtures shall be measured under respective Items Separately).

Material and Labour for Point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly Complete all as specified and as directed for One LIGHT / FAN / EXHAUST FAN / Bell/ Buzzer / SOCKET point controlled by One, One way switch 5/6 Amps.

Material and Labour for Point wiring complete with 1.5 Sqmm Single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non- metallic rigid PVC conduit of 20 mm dia and all conduit accessories (surfaced/concealed in walls/ceilings/floors/roof) and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly in existing mild steel terminal boxes with new 3mm thick hylem sheet top cover for housing switches, socket outlets, fan regulators with frame concealed in walls top cover fixed with brass screws and cup washers etc, Complete all as specified and as directed. for One 5A Socket Point Controlled by One Switch on Same Board with 5/ 6 Amps Switch Complete all as specified and as directed.

Material and Labour for Point wiring with 2.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly Complete all as specified and as directed for One 15/16 Amps Socket Outlet point on independent board controlled by one, one way 15/16 Amps switch.

Material and Labour for Point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly Complete all as specified and as directed for One LIGHT point controlled by two way switch 5/6 Amps.

Supply and Fixing in repairs Switch Piano Flush type, Single pole, One way 230 volts 5 Amps Complete all as specified and as directed. (Make: Havell`s / Anchor / Legrand)

Supply and Fixing in repairs Bell push, flush type, Single pole, one way, 5 Amps, 230 volts Complete all as specified and as directed.

Supply and Fixing in repairs Switch piano flush type, single pole, two way 230 volts 5 Amps Complete all as specified and as directed. (Make: Havell`s / Anchor / Legrand)

Supply and Fixing in repairs switch socket combination 2 -in-1, 3 pin / 5 pin, 5/15 Amps 240 volts all as specified and directed. (Make:- Havell`s / Anchor / Legrand)

Supply and Fixing in repairs Ceiling rose, 3 phase / PVC / polycarbonate, isolated body Complete all as specified and as directed. (Make: Havell`s / Anchor / Legrand)

Supply and Fixing in repairs Socket outlet 3 pin, 15 Amps flush type 240 volts universal pattern Complete all as specified and as directed. (Make: Havell`s / Anchor / Legrand)

Supply and Fixing in repairs Switch Piano Flush type, Single pole, One way 230 volts 15 Amps Complete all as specified and as directed. (Make: Havell`s / Anchor / Legrand)

Supply and Fixing in repairs Buzzer, Ding Dong AC, 230 volts, Complete all as specified and as directed.

Supply & Fixing in repairs Electronic fan regulator with 5 step speed control ,240 volts, 50Hz Complete all as specified and as directed.

Supply and Fixing in repairs LED Tube light fitting 1 x 20 W, Surface mounted, industrial box type luminaire with CRCA body, pre-coated in white & pre-wired for LED tube, bipin holders, connector block etc., including 20W-1 No LED T8 tubular lamp with in built driver, complete with all accessories and including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete including taking down old light fittings Complete all as specified and as directed. Make: (i) Cat part No:IGP131LT8-16 of Crompton for fitting or its equivalent in Philips / Havell`s. (ii) Cat part No: LTT8-20 of Cormpton LED light or its equivalent in Philips / Havell`s.

Supply and Fixing in repairs LED Tube light fitting 2 x 20 W, Surface mounted, industrial box type luminaire with CRCA body, pre-coated in white & pre-wired for LED tube, bipin holders, connector block etc., including 20W -2 Nos LED T8 tubular lamp with in built driver, complete with all accessories and including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal Complete all as specified and as directed. Make: (i) Cat part No:IGP131LT8-16 of Crompton for fitting or its equivalent in Philips / Havell`s. (ii) Cat part No: LTT8-20 of Cormpton LED light or its equivalent in Philips / Havell`s.

Supply and Fixing in repairs LED Tube light fitting 1 x 8 W, Surface mounted, industrial box type luminaire with CRCA body, pre-coated in white & pre-wired for LED tube, bipin holders, connector block etc., including 8W -1 No LED T8 tubular lamp with in built driver, complete with all accessories and including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal Complete all as specified and as directed. Make: (i) Cat part No: DMLN1 LT8 - 8 of Crompton & greaves for fitting or its equivalent in Philips / Bajaj / Havell`s. (ii) Cat part No: LTT8 - 8 of Crompton & greaves for LED tube light or its equivalent in Philips / Bajaj / Havell`s.

Material and Labour for Sub main wiring complete with two runs of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 2.50 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor and connected to common earth dolly drawn through and including 20 mm non- metallic rigid PVC conduit and conduit accessories (surfaced/concealed in walls/ceilings/floors/roof) etc Complete all as specified and as directed. Note: 2 runs of PVC FRLS cable, one run of earth continuity conductor cable and one run of PVC conduit shall be measured as one running metre.

Material and Labour for Sub main wiring complete with two runs of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor and connected to common earth dolly drawn through and including 25 mm non- metallic rigid PVC conduit and conduit accessories (surfaced/concealed in walls/ceilings/floors/roof) etc Complete all as specified and as directed. Note: 2 runs of PVC FRLS cable, one run of earth continuity conductor cable and one run of PVC conduit shall be measured as one running metre.

Material and Labour for Sub main wiring complete with four runs of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor and connected to common earth dolly drawn through and including 25 mm non- metallic rigid PVC conduit and conduit accessories (surfaced/concealed in walls/ceilings/floors/roof) etc Complete all as specified and as directed. Note: 4 runs of PVC FRLS cable, one run of earth continuity conductor cable and two runs of PVC conduit shall be measured as one running metre.

Supply and Fixing in repairs Metal clad switch socket Single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB SP 20 Amps and fixed concealed in walls Complete all as specified and as directed.

Supply and Fixing in repairs MCB DB SPN 8 way, horizontal, double door, 240 V, AC, 50 Hz, with sheet metal enclosure for MCB DP as incomer and SP MCBs as out going, IP-43 protection conforming to IS-13032, universal mounting with copper bus bar 200 Amps, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides Complete all as specified and as directed. all as per Legrand Cat No. 6077 14 or equivalent in standard/ L&T/ Havells

Supply and Fixing in repairs MCB DB TPN 4 way, horizontal, double door, 240 V, AC, 50 Hz, with sheet metal enclosure for MCB DP as incomer and SP MCBs as out going, IP-43 protection conforming to IS-13032, universal mounting with copper bus bar 200 Amps, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides Complete all as specified and as directed. all as per Legrand Cat No. 6077 15 or equivalent in standard/ L&T/ Havells

Supply and Fixing in repairs Vertical MCCB DB double door, TPN 4 ways including 32 Amps, MCCB TPN 16 KA -01 No with suitable bus bar including taking out existing DB, removing cable/wires and reconnecting the cable/wires with suitable size lugs Complete all as specified and as directed. Make: Cat No : DHDLVDRWGOFO04 of Havells or its equivalent in Legrand / Standard.

Supply and Fixing in repairs MCB SP 6 to 32 Amps rating, 'B' series, 10 KA breaking capacity, 240V, 50 Hz AC Complete all as specified and as directed. Make: Cat No : DHMCBSPF006-32 of Havells or its equivalent in Legrand / Standard.

Supply and Fixing in repairs MCB SPN 6 to 32 Amps rating, 'C' series, 10 KA breaking capacity, 240V, 50 Hz AC Complete all as specified and as directed. Make: Cat No : DHMCCSNF006-32 of Havells or its equivalent in Legrand / Standard / Indo Asian / HPL.

Supply and Fixing in repairs MCB TPN 32 Amps rating, 'C' series, 10 KA breaking capacity, 240V, 50 Hz AC Complete all as specified and as directed. Make: Cat No : DHMCCTNF006-32 of Havells or its equivalent in Standard / Indo Asian / HPL.

Supply and Fixing in repairs MCB TP 63 Amps rating, 'C' series, 10 KA breaking capacity, 415V, 50 Hz AC Complete all as specified and as directed. Make: Cat No : DHMCCTPF063 of Havells or its equivalent in Standard / Indo Asian / HPL.

Supply and Fixing in repairs MCCB Triple pole 415 volts 50 HZ AC suitable for current carrying capacity 32 Amps rating, fixed and thermal magnetic release with rupturing capacity 16 KA Complete all as specified and as directed. Make: Cat No : IHLGNT0032 of Havells or its equivalent in Standard / Indo Asian / HPL.

Supply and Fixing in repairs MCCB Triple pole 415 volts 50 HZ AC suitable for current carrying capacity 63 Amps rating, fixed and thermal magnetic release with rupturing capacity 16 KA Complete all as specified and as directed. Make: Cat No : IHLGNT0063 of Havells or its equivalent in Standard / Indo Asian / HPL.

Supply and Fixing in repairs MCCB Triple pole 415 volts 50 HZ AC suitable for current carrying capacity 100 Amps rating, fixed and thermal magnetic release with rupturing capacity 25 KA Complete all as specified and as directed. Make: Cat No : IHLGNT0100 of Havells or its equivalent in Standard / Indo Asian / HPL / Legrand / Crompton Greaves.

Supply and Fixing in repairs MCCB Triple pole 415 volts 50 HZ AC suitable for current carrying capacity 160 Amps rating, fixed and thermal magnetic release with rupturing capacity 25 KA Complete all as specified and as directed. Make: Cat No : IHLGNT0100 of Havells or its equivalent in Standard / Indo Asian / HPL / Legrand / Crompton Greaves.

Material and Labour for Cutting chases not exc 10 cm girth, pinning in making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landing, steps, chills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc; and making good Complete all as specified and as directed.

Material and Labour for preperation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint Complete all as specified and as directed.

Supply and Fixing 2.5 MFD Capacitors suitable for Ceiling fan of size 1200 mm sweep in position Complete all as specified and as directed.

Supply and Fxing in repairs LED T8 tubular lamp, 8Watt, 2feet, with extruded aluminium body and PC diffuser, with in built driver Complete all as specified and as directed. Make: Cat No : LTT8-8 of Crompton Greaves or equivalent

Supply and Fixing in repairs PVC terminal boxes of size 240 x 130 x 95mm, to pole by means of mild steel clamps with hinged door, bolts and nuts, provn for cable entry for incoming and outgoing including MCB SP 2.5 Amps-01 No 10KA and 3 way Epoxy connector-01 No and making all necessary connections duly fixed with clamps on pole and including cable glands threaded type IP55/IP65 made of polymide with lock nut Complete all as specified and as directed. Make: Cat No : GSJB-2817 of Sintex or equivalent in Hensel / Polycon.

Taking down the unserviceable and defective street light / flood light fitting / HPSV / MH / CFL of any type, make and wattage from the pole along with fixing arrangements complete up to 400 watt capacity from pole, building or hangar any height Complete all as specified and as directed.

Supply and Fixing LED street light fitting 45 Watts, with powder coated pressure die cast aluminium housing and IP 66 protection, built-in control gear complete with anodised reflector, toughened heat resistant glass cover, LED 45 watts white colour lamp, connector block with all accessories pre wired including necessary electric connection Complete all as specified and as directed. Make: Cat No : BRTFG 45W LED WW of Bajaj or Cat No LSTP-45 CDL of Crompton Greaves Ltd / Havells / Philips.

Supply and Fixing LED street light fitting 25 Watts, with powder coated pressure die cast aluminium housing and IP 66 protection, built-in control gear complete with anodised reflector, toughened heat resistant glass cover, LED 25 watts white colour lamp, connector block with all accessories pre wired including necessary electric connection Complete all as specified and as directed. Make: Cat No : BRLEP 25W LED WH of Bajaj or its equivalent in Havells / Philips / Crompton Greaves.

Supply and Fixing LED flood light 80 watt, pressure die cast housing with IP65 protection with efficient high output emitter LED for better distribution with all accessories pre wired including necessary electric connection Complete all as specified and as directed. Make: Cat No : BJFL 80W LED S of Bajaj or its equivalent in Havells / Philips / Crompton Greaves.

Suply and Fixing LED decorative post top lantern fitting 25W, 230V AC with IP 65 protection and resistant to impact and corrosion with necessary electrical connection Complete all as specified and as directed. Make: Cat No : BLPTSP 25W NM LED of Bajaj or its equivalent in Havells / Philips / Crompton Greaves.

Excavation in trenches in soft /loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient Complete all as specified and as directed.

Returning filling including spreading levelling watering and well ramming to excavated soil in layers not exc 25 cm thick Complete all as specified and as directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils Complete all as specified and as directed.

Material and Labour for Sand cushioning to cables with a layer of sand before and after laying the cable Complete all as specified and as directed. Note :- Sand shall be measured after punned down.

Material and Labour for Brick protection cover on cable with sub class 'B' bricks, across in trenches laid dry and flat adjacent to each other Complete all as specified and as directed.

Material and Labour for Cutting PCC / road 150mm thick for laying of LT UG cable and making good the disturbed surfaces with cement concrete 1:2:4, type B1, using 20mm graded stone aggregate Complete all as specified and as directed.

Material and Labour for G.I. tubing light grade of size 50mm bore for protection of cables to be laid under roads, crossings/culverts including taking down/up old unserviceable GI tubing Complete all as specified and as directed.

Material and Labour for cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in coping, bases of electric poles including necessary form work and finishing the exposed concrete surfaces of concrete even and fair Complete all as specified and as directed.

Material and Labour for Straight through joints (epoxy) heat shrinkable type for UG cable including jointing kit and all accessories complete for making joints suitable for LT UG Cable of Aluminium conductor of size 16 to 50, Sqmm 3.5 core Complete all as specified and as directed. Make : 3M Code- HSLA - 2/4C or equivalent in Densons.

Material and Labour for straight through joints (epoxy) heat shrinkable type for UG cable including jointing kit and all accessories complete for making joints suitable for LT UG Cable of Aluminium conductor of size 50 to 95 Sqmm, 3.5 core Complete all as specified and as directed. Make : 3M Code- HSLA - 2/4C or equivalent in Densons.

Taking out old unserviceable UG cable, supply and laying 10 sqmm, 2 core LT UG cable grade PVC insulated, PVC sheathed armoured, heavy duty, in trenches/ walls/poles/passing through pipes with multistranded aluminium conductor including lugs/ thimbles/ ferrules connection, testing and commissioning Complete all as specified and as directed.

Taking out old unserviceable UG cable, supply and laying 16 sqmm, 4 core LT UG cable grade PVC insulated, PVC sheathed armoured, heavy duty, in trenches/ walls/poles/passing through pipes with multistranded aluminium conductor including lugs/ thimbles/ ferrules connection, testing and commissioning Complete all as specified and as directed.

Taking out old unserviceable UG cable, supply and laying 25 sqmm, 4 core LT UG cable grade PVC insulated, PVC sheathed armoured, heavy duty, in trenches/ walls/poles/passing through pipes with multistranded aluminium conductor including lugs/ thimbles/ ferrules connection, testing and commissioning Complete all as specified and as directed.

Taking out old unserviceable UG cable, supply and laying 35 sqmm, 3.5 core LT UG cable grade PVC insulated, PVC sheathed armoured, heavy duty, in trenches/ walls/poles/passing through pipes with multistranded aluminium conductor including lugs/ thimbles/ ferrules connection, testing and commissioning Complete all as specified and as directed.

Taking out old unserviceable UG cable, Supply and laying 50 Sqmm, 3.5 Core LT UG cable grade PVC XLPE insulated, PVC sheathed armoured, heavy duty, in trenches/ walls/ poles/ passing through pipes with multistranded aluminium conductor including lugs/ thimbles/ ferrules connection, testing and commissioning Complete all as specified and as directed. Note for ser item No 54 to 58: (i) Earth work excavation, sand cushioning, bricks for protection, GI pipe etc shall be measured and paid for separately under relevant items of this schedule.

Material and Labour for mild steel section for cross arms fencing post/ bracings, supports, clamps, and back plates etc., fabricated including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive two coats of Aluminium paint over a coat redoxide zinc chrome primer including dismantling of old corroded cross arms of any description from poles Complete all as specified and as directed.

Material and Labour for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earth Strip 25x3 mm by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., Complete all as specified and as directed. Note: (i) The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/test point. (ii) Earth pit shall be constructed at least 0.5 metre away from each earth chamber.

Material and Labour for Earthing complete with copper plate electrode electrode 600 mm x 600 mm x 6 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to Copper earth strip 25x4 mm by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., Complete all as specified and as directed. Note: (i) The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/test point. (ii) Earth pit shall be constructed at least 0.5 metre away from each earth chamber.

Supply Only 05 KVAR Capacitor (MPP, Heavy duty) 440 volts with inrush current Limiting Coil Complete all as specified and as directed.

Supply Only 20 KVAR Capacitor (MPP, Heavy duty) 440 volts with inrush current Limiting Coil Complete all as specified and as directed.

Supply Only 25 KVAR Capacitor (MPP, Heavy duty) 440 volts with inrush current Limiting Coil Complete all as specified and as directed.

Supply Only 12.5 KVAR Capaitor duty contactor Complete all as specified and as directed.

Supply Only Add on Auxiliary contact Block 4 NO Complete all as specified and as directed. Note:- The quoted rates for Sl item Nos shall be inclusive of taking down old item and refixing the new item .

Taking down Ceiling fan / Exhaust fan, sealing the cable ends ,dismantling the fan blade and keeping in safe custody Complete all as specified and as directed. Note: Servicing of fans and Spares will be measured and paid separately under relevant items of this schedule.

Material and Labour for preperation and Painting of ceiling fan complete, at site with synthetic enamel paint by spraying painting including filling cavities with filler,one coat after cleaning Complete all as specified and as directed.

Material and Labour for Servicing the Ceiling / Exhaust fan of any size by Cleaning, Oiling, greasing & assemble the fan properly including replacing the rusted bolts, cater pins, rubber wheel bearing washers, bushes etc., and tightening all the bolts, nuts,screws, clamps etc Complete all as specified and as directed.

Supply Only GM bush suitable for Ceiling fan 1200 / 1400 Sweep Complete all as specified and as directed. Make: Crompton Greaves / Bajaj / Usha

Supply Only Ball bearings suitable for Ceiling fans / Exhaust fans / Wall mounting fans of 1200 / 1400 Sweep Complete all as specified and as directed. Make: SKF / NBC / TATA or equivalent.

Supply Only 4 MFD Capacitors of the fan in position Complete all as specified and as directed.

Material and Labour for dismantling the defective Exhaust fans motor taking to work shop and by taking out burnt copper winding and rewinding with super enamelled copper wire of existing gauge and weight including replacement of all insulation material, "O" rings and other petty items required for making motor functional Complete all as specified and as directed.

Material and Labour for dismantling the defective Ceiling fans motor taking to work shop and by taking out burnt copper winding and rewinding with super enamelled copper wire of existing gauge and weight including replacement of all insulation material and other petty items required for making motor functional Complete all as specified and as directed.

Material and labour for LED bulkhead fitting aluminium housing with 100% Luminusand of make crompton Cat Pt No: LBHP-10-CDL / Equivalent

Supply and Fixing in repairs new heating element suitable to existing model and make of storage type geysers, 2 KW Dual clip type / triangle type / round type with rubber gasket suitable for geysers up to 25 / 50 Ltr capacity Complete all as specified and as directed. Make: Theeta / Elteck or equivalent

Supply and Fixing in repairs thermostat clip type (Range 30o C to 80o C and acting at 70o C) for geysers up to 50 Ltrs Complete all as specified and as directed. Make: Elcon or equivalent

Supply and Fixing 15mm bore PVC connections with brass nuts 650mm in length suitable to connect GI pipe 15 mm dia to hot / cold water outlet of geyser Complete all as specified and as directed. Make: Kohinoor or eqivalent

Supply and Fixing in repairs pressure release valves suitable for geyser upto 50 litres capacity type as per existing pressure valve Complete all as specified and as directed.

Supply and Fixing in repairs inner Base assembly for geyser of 25 lts capacity with inlet outlet pipes complete all as directed.

Supply and Fixing Indicating lamps green / red suitable for geysers upto 50 litres Complete all as specified and as directed.

Taking down the old T5 tube rod and choke and supply & fix LED T5 tubular lamp 15 Watt with aluminium body ,including external driver complete all as specified . Make : CG, Cat No 112563 BLTB-15W-CWC. Driver cat pt No 112564 DRIVER BLTB 15W CWC

Taking down water heater removing all electric connection and water connection and opening inner tank copper / stainless steel shifting to civil workshop making necessary welding /bracing and arrresting leakage and testing and fixing the same in position all as directed by engr in charge

Supply and Fixing in repairs LED Aviation obstruction light fitting with powder coated pressure die cast aluminium housing with polycarbonate enclosure with built in LED chips including 302 Nos of LED luminaries complete all accessories pre wired including necessary electric connection Complete all as specified and as directed. Make: Cat No : 110731 BGAV 302 LED of Bajaj or its equivalent in Havells / Philips / Crompton Greaves.

SREE VARU ELECTRICALS

M/s STAR ELECTRICALS