CONSTRUCTION OF REST ROOM IN ZOO HOSPITAL

Earth work excavating and depositing on bank with initial lead of 10mt. And initial lift of 2mts in Hard gravelly soil for foundation

Supply and filling M sand for foundation, basement etc.,

Plain cement concrete 1:4:8 using 40mm metal for foundation

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification

Cement concrete 1:2:4(one cement, two sand and four hard broken stone) using 20 mm gauge hard broken granite stone jelly for all RCC works such as lintels, beams, floor or roof slab, canopy slab, sill slabs, sunshades, staircase faces and other similar it.

Brick work in C.M 1:5 using second class chamber burnt and table moulded bricks of 9"x4½x3" size for basement in super structure

Plastering CM 1:5 12 mm thick for wall surface

Flooring with plain ceramic tiles of approved quality and colour of size 305x305x6mm thick laid in cm1:3 for 20mm thick and painting with white cement including furnishing to joint and painting flash with tiles surface complete

Dadooing the walls with of approved quality and colour plain ceramic tiles size 300mmx450mmx8mm thick laid in cement mortar 1:2, 10mm thick and pointing with white cement using 0.4Kg/M2 including finishing the point and pointing flush in the file surface complete 10m2(Page 108)

Painting two coats with plastic Emulsion paint by (ACE) of approved quality and colour over a priming coat for outer wall

Finishing the top of roof with on course of machine pressed tiles ( 23 cm x 23 cm x 20mm ) in cement mortar 1:3 (one cement and three sand) 12mm thick with crude oil 10 % by weight of cement used and pointed neatly with the same oiled mortar.

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Director before use on work

Supplying and fixing of Fly Proof Mesh for Doors and Windows using 50mmx25mm x3mm M.S Square tube outer frame over window ,shutters with M.S "Z" and "T" section of size 25mmx25mmx3mm tk. Stainless steel fly proof mesh sandwich with inbetween the M.S Square tube as per standared specification and as directed by the departmental officers.

Providing stainless Steel handrails with 10mm thick toughened glass with necessary fixtures. The rate include all labours, transport, scaffloding and other incidental charges in cluding all fittings etc. The materials to be used shall be got approved by the Director concerned before use on work, etc., complete as per standard specification.

Packing the Toilet floor pipe corecutting for providing pipeline using Crystaline bonding agent which shall be applied as a bonding coat and non-shrink grout, after necessary surface grinding.

Supplying and fixing in position first quality and approved Gun Metal Gate valve /wheel valve /check valve (Heavy Type) with ISI mark of the following sizes including cost of shellac,thread etc., Including labour for cutting and threading of GI Pipe etc.,Complete Complying with standard Specfications for both internal & External Water supply arrangements

Supplying and fixing in position 15mm dia following taps made of Jaquar or equivalent (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Director before use on the works)

Long body tap

Swan neck tap

Angle cock

Supplying and fixing in position Stainless steel Two way Bib Cock with Health Faucet of Jaquar or equivalent make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.

Supplying and fixing in position of Stainless steel Bottle trap of Jaquar or equivalent make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.

Supplying and fixing in position Frameless mirror of 5mm thick with size of 1000 x 780mm frameless modern mirror with beveled edges of Saint Gobin brand of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing approved best quality brass Stainless steel towel rail 600mm long of approved make (Jaquar or Equivalent )with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications.

Supplying and fixing in position best quality approved make of Jaquar or equivalent under counter oval type wash hand basin of size 560 x 450mm with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.

75 mm dia PVC soil / waste pipe

115 mm dia PVC soil / waste pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works

UPVC Elbow

40 mm dia

25 mm dia

UPVC Elbow with Door

110 mm dia

UPVC Tee

40 mm dia

25 mm dia

75mm dia

UPVC Tee with Single Door

75mm dia

UPVC Reducer

40mm x 32mm dia

32mm x 25mm dia

Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.

100 mm dia

75 mm dia

Supplying, laying and jointing UPVC Pipe (Un-Plasticized Polyvinyl Chloride) (Schedule-80) of approved quality and best variety conforming to BIS of the following dia including cutting, and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC Pipe (Un-Plasticized Polyvinyl Chloride)shall be got approved by Executive Engineer before use on works.

25 mm dia

Supplying and fixing position CI Nahani Trap / Floor Trap of the size 100 x 75mm with stainless steel gratings with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

labour charges for fixing above Item No 15 to Item No 30 (Plumber I class )

labour charges for fixing above Item No 15 to Item No 30 (Mazdoor II Class)

Providing and fixing approved make jaquar or equivalent of white vitreous wall mounting type EWC with CP bolts, nuts, CI chair(painted with two coats of enamel paint over a coat of primer) or other hanging arrangemets, bakelite /polypropiline seat cover with CP hinges, rubber buffer, CP brass screw, washer with all accessories including cutting and making good the walls etc.,complete complying with standard specification and as directed by the departmental officers. (The materials should be got approved by the Director before use on works).

Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc. (White)

Please Enable Macros to View BoQ information