M and R Murbadi Dam Providing and erecting various types of mechanical work as per report of mechanical department (DSO) Dapodi Pune.

Dismantling of Sliding type Gate leaf of size 0.9 x 0.9 Mtr / 1.2 x 1.2 Mtr (12 to 30 MWH) and hoist assembly - 1 No. lifting of the same up-to Platform for Repair work and lowering on Sill Beam. Complete job including cost of sundry material and labour charges, with leads & lifts at site etc complete.

SCREW STEM HOIST 5 Ton Cap. i) Mfg, Providing and supplying V Threaded Stem Rod Ø 50mm L-2150 mm ii) Mfg, Providing and supplying Square Threaded Stem Rod Ø 50mm L-3 m iii) Mfg, Providing and supplying Intermediate stem Rods Ø 50mm L-1200 mm- 4 nos iv) Mfg, Providing and supplying Flanges Male & Female 10 Nos. v) Providing and supplying Nut for V threaded stem rod Ø 100mm L-140 mm- 4 Nos

Manufacturing, Erection & Testing of Screw Stem Hoist 5 Ton capacity including Manufacturing with QAP, fabrication, erection, commissioning & testing as per standard drawing / approved drawings & Specifications with relevent IS codes mentioned in drawing. All materials used shall conformed to related IS Codes. It includes all materials, Labour charges, machining and machinery charges with leads & lifts at site etc complete as per drawings and instructions of Engineer-in-Charge.

Dismantling of bent Hoist foundation frames of both Stem Hoists. Replacing old with new one and fabricating and erecting of new bace frames for Hoists. Welding in position and level. Overlapping embeded girders by MS flats, for strengtheing of the same. Complete job with materials and labour.

Manufacturing, Erection, & Testing of Outlet gate Sliding type of size 0.9 x 0.9 Mtr. - 20Mtr. head including Manufacturing with QAP, fabrication, erection, commissioning & testing as per standard drawing / approved drawings & Specifications with relevent IS codes mentioned in drawing. All materials used shall conformed to related IS Codes. It includes all aterials, Labour charges, machining and machinery charges with leads & lifts at site etc complete as per drawings and instructions of Engineer-in-charge.

Fabrication & Erection charges of New A-frame for hanging Chain Pully Block to make arrangement for dismantling of Hoisting Structure and lifting Stem Rods and Gate leaf etc.

Providing and Fitting of Indicator for Indication of lowered and lifted position of stem rods. with providing & fitting Gauge plates veretically paraellel to Stem Rod of Aluminium composite panel sheet with exterior panel coated with Kynar 500 (min.70%) PVDF coating with computerized gauge marking with reflective radium pasting, spray lamination with polyurethane chemical, and and Indicator arrow plates comlete with materials and labour etc.

Providing and fixing Gauge plates for measuring water Levelof Reservoir made from Aluminium composite panel sheet with exterior panel coated with Kynar 500 (min.70%) PVDF coating with computerized gauge marking with reflective radium pasting, spray lamination with polyurethane chemical,Size 0.2m W x 19 Rmt L

Fabrication and Erection of Ladder from Hoist Bottom to Gate for inspection and Repair maintenance works to the Gates and other Structure, in 2 Stages with Landing platform in middle on vertical supports of ISMB, with Railing arrangement. Complete Job with material and labour, etc.

Providing and fitting of Sluice valves 450 mm- 2 Nos and 300 mm - 1 No. by dismantling old assembly and all other parts and .cleaning greasing etc. Providing and fitting extension 300 mm dia. pipe with flange for matching with Sluice Valve Complete job with material, and labour.

Anticorrossive painting of complete gated structure like gate assembly stem rods,brackets,outlet pipes hoist and frame assembly,railing & River Bridge, Gallery Approach Bridge, & Stair case, Stairs bottom to Dam Top, and whole Railing Structure on Dam Top and Bottom Sluice Valves and Pipes, Bottom Valve 300 Dia and Pipe connections etc,This includes cleaning of surface scrapping old paint and applying rusticide chemical and applying best quality paint etc. complete with material and labour.

Erection of Lightening arrester required size used for Supplying and erecting GI strip of high purity earthing conventional spike type air termination suitable to of heavy gauge 40 mm dia.Copper carry lightning stroke made up pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation, Erecting G.I. pipe ‘C’ class ERW 50 mm dia.with necessary fittings. back filling ground enhancing compound 25 kg bag Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required.Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts

Providing and erection Salient feature board Providing and fixing informatory sign boards in square or rectangular shape of any size for overhead gantries or alike made out of 3mm aluminum composite panel bonded with IRC Specified colour of retro reflective sheeting of Type XI Diamond Grade Sheeting (DG3) With ECF( Electronic Cutable Film) Lettring having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including M. S. angle iron frame and bracing of size 35mm X 35 mm X 5 mm and duly painted with flat oil paint including G.I. fixtures etc. and fixing the boards.

Providing, installing and Erecting in correct line and level FRP V Notches of following size and discharge capacities for accurate measurement of water flowing through open channel with prefabricated fibre glass lining moulded engraved gauge marking (in ltr/sec and in cms) including discharge table, cap.marking, flow direction sand treatment on backside of V notch FRP V Notch having discharge capacity 15 lts/sec of section 20x40cm with U/s & D/s Chgannel

Please Enable Macros to View BoQ information