Impr. and Widen of Sujanpur to Hamirpur road via Chauri Patlander

Amount

Excavation in soil in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD 2014 technical specification clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of Engineer-in-Charge including entire carriage of material within all leads lifts and other incidentals. Recovery of useful stone for 6340.24 cum (Six thousand three hundred forty point twenty four) cubic metre shall be made on prorata basis @ Rs.300/- (Rupees Three hundred only) per cubic metre amounting to Rs. 1902072/- only (Nineteen lacs two thousand seventy two) only In each running bill for this item. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all leads and lifts, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No.300.1 and 300.2 MORTH specification clause 408 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification MORTH clause 305 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm (three hundred millimeter), removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto all leads and lifts including removal and disposal of top organic soil not exceeding 150mm (one hundred fifty millimeters) in thickness as per technical specification MORTH clause 201 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unservicable material and stacking the serviceable material within all leads and lifts as per technical specification MORTH clause 202 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cement concrete grade M-10 (M-ten).

Cement concrete grade M-15 & M-20 (M-fifteen & M-twenty).

Brick work in cement mortar.

Scarifying of flexible pavements and disposal of dismantled materials upto all leads and lift, stacking serviceable and unserviceable materials separately, as per technical specification MORTH and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Bituminous courses.

Granular courses.

Construction of Granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per drawing and technical specification clause 401 of MORTH specifications 2013 table 400.1, Grading-I 150mm(one hundred fifty millimeters)thick (GSB in II layers comprising of 1st layer =75mm (seventy five millimeters) thick and 2nd layer of 75mm (seventy millimeters) thick existing scarified WBM, used in GSB material by adding 30% (thirty percent) fine aggregate for reconstruction portion and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of Granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per drawing and technical specification clause 401 of MORTH specifications 2013 table 400.1, Grading-I 150mm(one hundred fifty millimeters)thick (GSB in II layers comprising of 1st layer =75mm (seventy five millimeters) thick and 2nd layer of 75mm (seventy millimeters) thick Fresh GSB material, and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying spreading and compacting graded stone aggregate of Wet Mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desited density. (WMM in 3 layers comprising of 1st layer = 75/100mm thick, (seventy five/one hundred millimeters) 2nd layer of 75mm (seventy five millimeters) thick and 3rd layer 75mm (seventy five millimeter) thick,as per technical specification MORTH clause 406 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60kg/sqm (zero point sixty kilograme/square metre) using mechanical means as per technical specification clause No. 502 of MORTH specification 2013,and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20kg.per sqm. (zero point twenty kilograme per square metre) on the prepared bituminous/granular surface cleaned with mechanical broom as per technical specification clause 503 of MORTH specification 2013, @ 2.00kg./10m2 (two kilogram/ ten square meter ) and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes (seventy five tonnes) per hour using crushed aggregates of specified grading, premixed with bituminous binder @ Min. 4.5 percent (four point five percent) by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specifiation clause No. 505 complete in all respect of MORTH specifications 2013. 50mm (fifty millimeters thick), and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 30mm (thirty millimeters) thick Bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ Min 5.5 per cent (five point five percent) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.507 complete in all respects of MORTH specifications 2013. 30mm (thirty millimeters) thick and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utililsing the remaining earth locally for road work as per MORTH specification clause No.304 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Plain cement concrete 1:3:6 (one cement: three sand: six graded crushed stone aggregate nominal mix in foundation and sub structures with crushed stone aggregate 40mm (forty millimeters) nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14(fourteen) days as per MORTH technical specification/HPPWD specification and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement in super structure complete as per drawing and technical specification MORTH under section 1600 and 2300 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Plain cement concrete PCC M-15 (M-fifteen) in open foundation design mix with minimum cement contents 240kg/cum (two hundred forty kilogramme per cubic meter) complete as per drawing and technical specifications, and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Plain cement concrete PCC M-20 (M-twenty)grade design mix with minimum cement contents 250 kg/cum (two hundred fifty kilogramme per cubic meter) in sub-structure complete as per drawing and technical specifications, and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providng and laying Plain/reinforced cement concrete RCC M-20 (M-twenty) grade design mix with minimum cement contents 300kg/cum (three hundred kilogramme per cubic meter) in sub-structure complete as per drawing and technical specifications, and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Plain/reinforced cement concrete RCC M-25(M-twenty five) in super-structure design mix with minimum cement contents 340kg/cum (three hundred forty kilogramme per cubic meter) complete as per drawing and technical specifications, and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete wearing coat M-30 (M-thirty) grade design mix with minimum cement contents 360kg/cum (three hundred sixty kilogramme per cubic meter) including reinforcement complete as per drawing and technical specifications, and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Back filling with granular material behind abutment, wing wall and return wall complete as per drawing and technical specification MORTH clause 710.4 of IRC 78 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting of parapet walls by two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ,and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Provision of an reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-20 (M-twenty) grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25mm (twenty millimeters) dia, 450mm (four hundred fifty millimeters) long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH-33022/1/94-DO III dated 24 june 1994 as per dimensions in the approved drawing and at locations,and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Drainage spout complete as per drawing and technical specification MORTH clause 2705 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and Laying reinforced cement concrete pipe NP3/prestressed concrete pipe 900mm (nine hundred millimeter) dia for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement: two sand) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets MORTH clause under section 2900 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 710.1.4 of IRC 78 MORTH specifications to a thickness of not less than 600mm (six hundred millimetere) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm coindition complete as per drawing and technical specification,and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing weep holes in brick masonry/plain/reinforced concrete abutment, wing wall/return wall with 100mm (one hundred millimeter) dia PVC pipe, extending through the full width of the structure with slope of IV:20H towards drawing foce. Complete as per drawing and technical specifications MORTH clause 2706 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and construction of a gabian structure for retaining earth with segments of wire creates of size 7mx3mx0.6m (seven metre into three metre into zero point six metre) each divided into 1.5m (one point five metre) compartments by cross netting, made from 4m (four metre) galvanized steel wire @ 32 kg. (thirty two kilograme) per 10sqm (per ten square metre) having minimum tensile strength of 300 (three hundred) mpa conforming to IS: 280 and galvanizing coating conforming to IS:4826, woven into mesh with double twist, mesh size not exceeding 100x100mm (one hundred into one hundred millimeters), filled with boulders with least dimension of 200mm (two hundred millimeters) all loose ends to be tied with 4mm (four millimetre) galvanized steel wire,and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC: 67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5mm (one point five millimeters) thick supported on mild steel angle iron post 75mmx75mmx6mm (seventy five millimeters into seventy five millimeters into six millimeters) firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 45cmx45cmx60cm,(forty five centimeter into forty five centimeter into sixty centimeters), 60cm (sixty centimeter) below ground level as per approved drawing,and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

90cm (ninety centimeter) equilateral triangle

60cm (sixty centimeter) equilateral triangle.

60cm (sixty centimeter) circlulat

90 cm (ninety centimeter) high Octagonal

60cmx45cm(sixty centimeter into forty five centimeter) rectangular

Providing and fixing Direction and Place Identification signs upto 0.90sqm sizd Board : Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm (two millimeters) thick with area not exceeding 0.90 sqm.(zero point ninety square metre) supported on a mild steel single angle iron post 75x75x6mm (seventy five into seventy five into six millimeters) firmly fixed to the ground by means of properly designed foundation with M-15(M-fifteen) grade cement concret 45x45x60cm (forty five into forty five into sixty centimetre), 60cm (sixty centimeter) below ground level as per approved drawing, and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Direction and Place Identification Signs more than 0.9 sqm size Board: Providing and erecting direction and place identification retro-reflectorised sign as per IRC: 67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm (two millimeter) thick with area exceeding 0.9 sqm (zero point nine square metre) supported on a mild steel angle iron post 75mmx75mmx6mm, (seventy five millimeters into seventy five millimeters into six millimeters) 2 Nos, firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 45cmx45cmx60cm, (forty five centimeter into forty five centimeter into sixty centimeter), 60cm. (sixty centimeter) below ground level as per approved drawing, and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound 2.5mm (two point five millimeters) thick including reflectorising glass beads @ 250 gms per sqm. Area, (two hundred fifty gramme per square metre) thickness of 2.5mm (two point five millimeters) is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, as per MORTH technical specification clause 803 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Reinforced cement concrete M-15 (M-fifteen) grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc,and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

5th kilometre stone (precast)

Ordinary kilometer stone (precast)

Hectometer stone (precast)

Supplying and installation of delineators (roady way indicators, hazard markers, object markets), 80-100cm (eighty- hundred centimeter) high above ground level, painted black and white in 15 cm (fifteen centimeters)wide strips, fitted with 80x100mm (eighty into one hundred millimeters) rectangular or 75mm (seventy five millimeters) dia circular reflectorized panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings, and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing road cat eyes complete as per drawing and technical specification clause 805 of MORTH specifications 2013 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cat Eyes -ABS plastic type confirming to IRC/ASTM code of make 3m (three metre) or averydension.

Providing and erecting overhead signs 12m (twelve metre) wide with a corrosion resistant 2mm (two millimeters) thick aluminium alloy sheet with high intensity grade retro-reflective sheeting of encapsulated lens type with vertical and lateral clearance given in clauses 802.2 and 802.3 MORTH specifications 2013 and installed as per clause 802.7 over a designed, support system of aluminium alloy or galvanized steel trestles and trusses of sections and type as per structural design requirement and approved plans and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and erecting and "W" metal beam crash barrier comprising of 3mm (three millimeters) thick corrugated sheet metal beams rail, 70cm (seventy centimeters) above road/ground level, fixed on ISMC series channel vertical post, 150x75x5mm (one hundred fifty into seventy five into five millimeters) spaced 2m (two meters) centre to centre, 1.8m (one point eight metre) high, 1.1m (one point one metre) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS: 1367 and IS: 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm, (one hundred fifty into seventy five into five millimeters), 330mm (three hundred thirty millimeters) long complete as per clause 811,and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying of interlocking concrete block pavements having thickness 80mm (eighty millimeters) M-40 (M-forty) grade of concrete make NTC as per IS: 15658 as per drawing and technical specification,and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

OM PARKASH SHARMA AND SONS

S.S.Chauhans Construction Private Limted