Construction of Building Of Primary Health Center Chaktroo, Pyt, Chaktroo, Block Sathra, Under B2V3 Year 2020-21

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 mix of 40mm nominal size agg.

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) With 30% B/Stone

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) Mix

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases for columns

Shelves (cast-in-situ)

Edges of slabs and breaks in floors and walls Under 20 cm wide

Columns, pillars, piers, abutments, posts and struts.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Stone Filling By Hand Packed

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level

Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3(1 cement: 3 fine sand) including curing.

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand)

Cement concrete flooring 1:2:4 mix of 50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick for Second Class deodar wood.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class Kail wood

Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Painting with synthetic enamel paint of approved brand and manufactureto give an even shade.Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand and manufacture.

Providing Electrification Including wires Switches With complete job

Carriage of Sand and stone agg. Below 40mm nominal size 7.5km by MT & 200M BY HL

Carriage of stone agg. Above 40mm nominal size 400M by HL

Carriage Of Cement From 7.5KM By MT & 200 M By HL

Carriage of T- Steel From 7.5KM BY MT & 200M BY HL

Carriage of Bricks BY 232KM MT & 200 M BY HL

M/S MOHD BASHIR CONTRACTOR

M/S Ishtiaq Ahmed