Execution of Civil works for a setting up of mechanized laundry with a capacity of 10 tonnes per day (i.e., 5 tonnes per shift) in Bilaspur under the jurisdiction of Sr.DEN/Settlement/ BSP.

A-(CPWD DSR-2021-Ver-2 all items except Schedule-B) 59431599.49 Below/P

B-(CPWD-DSR-2021 covered under Chapter 9,10 & 11 only) 22686943.69 Below/P

Item Breakup - A-(CPWD DSR-2021-Ver-2 all items except Schedule-B)

Item Breakup - B-(CPWD-DSR-2021 covered under Chapter 9,10 & 11 only)

Item Breakup - C-(N.S. items)

Providing of JCB Machine (in good working Hour condition) for levelling and dressing ground / dismantling structures with contractor's labour, JCB machine, machine operator, fuel, etc. The contractor shall arrange road permit for vehicle for all the States of operation, as per instructions of engineer in-charge. Payment shall be made for actual working hours at site. (Referred as 021510 of USSOR- 2010)

Providing and fixing concertina coil fencing Metre with required dia 600 mm having 50 nos. round per 6 m length upto 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in- charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm. with tape (0.52 mm thick) and weight 43.478gm/metre (cost of M.S. angle, C.C. blocks shall be paid separately) BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Providing & laying Selection no. 1 doob grass Sqm turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and then rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge (Refered as 2.34 of DSR- Horticulture-2020)

Making, supplying & providing of detailed Job design, structural drawing, architectural drawing, landscaping drawing with preliminary activates like final location, Geotechnical of building and other structures/ elements in connection with construction of Mechanized Laundary Plant at Bilaspur. Items briefly involved are : (i) Preparation and finalization of details working drawings (Architectural & structural) for Mechanized Laundary Plant in consultation with railway authorities. (ii) Working out the total requirement water consumption, designing the various component of complete water system preparation and finalization of working drawings. (iii) Preparation and finalization of detail working drawings of Mechanized Laundary Plant, other service buildings, care takers room, Drainage. sewerage, roads, street lighting electrical sub station, electrical & communication cable routes internal wiring diagram etc. (iv) Geo- technical and soil investigation for structural designs and drawings for all components of the civil engineering structures. (v) Structural drawing shall cover seismic affect as relevant codal provision and design of foundations and RCC frame work structure shall be for maximim permissible floo./Height of building.

Air roof turbo ventilator..Turbo Ventilator 24"" Each V Strong (Weight-4.4 kg, Height-370 mm, Centre Dia-670 mm); Top Cover 24"" V Strong(Material-SS202/SS304,Diameter-385 mm, Thickness-0.5 mm); Neck Ring 24"" V Strong(Material-SS 430, Diameter-620 mm,Width-CH. Tyre 60mm, Thickness-1.2 mm); Arms 24"" V Strong(Material-Alloy Still, No of Wings-06 Nos, Size-20x315 mm); Wings (Material-AL/SS,Diameter-38 No, Width-0.46 mm, Thickness-60 mm); Outer Ring (Material- SS 430, Diameter-620 mm, Width-100 mm); Shaft (Material-Alloy Still, Diameter-12 mm, Length-325 mm); Strips Material-Alloy Still, No of Wings-04 Nos, Size-25x340 mm, Bearing-Self Lub. (02 Nos), Rivet-AL)

Exploratory drilling of Boreholes down to Metre required depth, drilling of 150mm diameter boreholes in all type of soils except hard rock and large boulders (boulder core more than 30 cm), including refilling and reinstating surface, and disposing off surplus material including use of mechanical rigs with power operated winches as well as percussion / chieselling tool for advancing through occasional seams of hard strata to be employed, where necessary in Dry area 0m to 10m (Reffered as 191011 of USSOR-2010) BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Exploratory drilling of Boreholes down to Metre required depth, drilling of 150mm diameter boreholes in all type of soils except hard rock and large boulders (boulder core more than 30 cm), including refilling and reinstating surface, and disposing off surplus material including use of mechanical rigs with power operated winches as well as percussion / chieselling tool for advancing through occasional seams of hard strata to be employed, where necessary in Dry area 10m to 20m (Reffered as 191012 of USSOR-2010)

Taking out 100mm dia & 450mm long Each undisturbed samples of soil from bore holes, including provision of air tight containers for packing and, labelling incl. transporting the samples to laboratory. Piston sampler shall be used for extracting undisturbed samples where necessary. Samples shall be collected as per IS 2720 (Reffered as 191100 of USSOR-2010)

Preparation and submission of Final report Each giving complete and comprehensive record 1 of investigations, laboratory test reports and calculations in approved format (Reffered as 191180 of USSOR-2010)

Drilling of NX size borehole (75 mm dia) in all Metre types of hard rock (fresh rock) and collection of rock core samples from boreholes and preserving in boxes 0m to 10m (Reffered as 191041 of USSOR-2010)

Taking out 100mm dia & 450mm long Each disturbed samples of soil from bore holes, including provision of air tight containers for packing, labelling transporting the samples to laboratory. Samples shall be collected as per IS 2720 (Reffered as 191110 of USSOR-2010)

Conducting laboratory Testson collected soil Each samples asper relevant IS code Moisture contents/ Dry density (Reffered as 191141 of USSOR-2010)

Conducting laboratory Tests on collected soil Each samples as per relevant IS code Atterberg Limit (Reffered as 191142 of USSOR-2010)

Conducting laboratory Tests on collected soil Each samples as per relevant IS code Specific Gravity (Reffered as 191143 of USSOR-2010)

Conducting laboratory Tests on collected soil Each samples as per relevant IS code Grain size analysis Including Hydrometer analysis (Reffered as 191144 of USSOR-2010)

Conducting laboratory Tests on collected soil Each samples as per relevant IS code Direct Shear Test (Reffered as 191145 of USSOR-2010)

Conducting laboratory Tests on collected soil Each samples as per relevant IS code Natural Density (Reffered as 191146 of USSOR-2010)

Conducting laboratory Tests on collected soil Each samples as per relevant IS code Consolidation Test (Reffered as 191147 of USSOR-2010)

Conducting laboratory Tests on collected soil Each samples as per relevant IS code Unconfined Compression Test (Reffered as 191148 of USSOR-2010)

Conducting laboratory Tests on collected soil Each samples as per relevant IS code Triaxial Test (Reffered as 191149 of USSOR-2010) BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Conducting standard penetration test as per Each IS 2131 at approximate 1.5m intervals in bore holes as per relevant IS code, as directed by Engineer-in-charge (Reffered as 191120 of USSOR-2010)

Providing & fixing, jointing with approved Metre adhesive PVC Pipe for 150mm dia pipe. Sanitary works includes all fitting (i.e.bend, door, tee cross, Y shape,floor trap, cowls, door bend clamps etc.,) Make Perkash or Finolex or Kishan or equivalent (Type B only). It includes all lead, lift, taxes charges complete as directed by Engineering-in- charge. Total 1261613.59