Constn. Of Cremation shed at Kottaiyur Panchayat

Amount

Construction of crimination shed building

Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil as per SS 20B for narrow foundation

Cement concrete 1:4:8 mix using 40mm size LSS metal including cost and conveyance of all materials to site, labour charges for laying consolidation, curing etc., complete.

Brick work in cm 1:5 mix using best country bricks including cost, conveyance of all materials to site, labour charges etc., complete

Supplying and erection centering for sides and soffits including supoorts and struttion up to 3.29m height for plane surface in all floors with all cross bracings using mild steel of size 90CMx60Cm and 10 gauge stiffened, welded with mild steel angles of size 25mm x 25mm x3 for boarding laid over siver oak ( Country wood) just of size 10 Cm x6.5cm dia spaced about 92 cm Centre to center and supported by casurmas propels of 10Cm To 13Cm dia spaced at 75Cm Center etc Complete complying with standard speicification and as directed

Providing and laying in position, M-20 Grade in accordance with IS:456-2000, using 20mm and down grade hard broken granite stone jelly for all RCC Items of works with minimum cement content of 350kg/m3 and maximum water cement ratio of 0.50, including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9130 to accelerate, rated setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m) 7730kg. of 20mm machine crushed stone jelly and with about (3.3cum) 5156 kg. of 10-12mm machine crused stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with Mechanical vibrators, finishing, curing, etc.,and providing fixtures like fan clamps in the RCC Floor / roof slabs wherever necessary without claiming extra, etc., Complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No Separate payment will be made by the Department for the excess usage of materials).

Steel - Fe 500 D: Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers.

Terrace Floor finshed with one course of pressed tiles of size 20x20x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm

Providing and applying 10 mm thick Cement plaster in Cement mortar 1:3 ( One part of Cement and Three parts of Sand ), to finishing the exposed surfaces of R.C.C. items of works such as Roof (or) floor slabs, beams, and Sun shades etc.to correct plane and level including scaffolding, hacking of surface, chiselling the undulated surface wherever necessary and curing etc., all materials and labour complete in all respects including all lead, lift and descent and as directed by the Enineer in charge. This rate includes the cost of providing Cement Mortar beadings for sun shades, steps,landing slabs, elevation etc. complete complying with standard specifications.

Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent and as directed.

Terrace Floor finshed with cement mortar 1:4 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm

carted earth filling including cost and conveyance of all materials to site and all labour charges etc complete

suppling and fabricating and placing in position in ms steel

Cement concrete 1:2:4 mix using 20mm size LSS metal including cost and conveyance of all materials to site, labour charges for laying consolidation, curing etc., complete.

Supplying and painting the walls with one coat of wall primer and two coats of Exterior emulsion (apex or equivalent) as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

K Govindan