Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC FLAT NO 03 MALTI NIWAS AVADH VIHAR COLONY MANDAKNI BLOCK BEHIND RAILWAY STATION DISTRICT AYODHYA 224001 UP | AYODHYA | AYODHYA | UP | 224001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹28.9 L+₹4.1 L (16.6%)Rejected-Finance MIG 444 AWADHPURI COLONY AMANATGANJ AYODHYA 224001 | AYODHYA | AYODHYA | UTTAR PRADESH | 224001 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹29.0 L+₹4.2 L (16.7%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹30.7 L+₹5.9 L (23.8%)Rejected-Finance 161 SADAR BAZAR SADAR BAZAR CANTT AYODHYA UP PIN 224001 | AYODHYA | AYODHYA | UP | 224001 | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹31.1 L+₹6.3 L (25.4%)Rejected-Finance | L5 | Rejected-Finance Not being L1 |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
8 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) Faizabad
Garrison Engineer Military Engineer Services Faizabad PIN-224001
REPAIR MAINT OF BR NATURE WORKS OF ELECTRIC INSTALLATIONS IN THE AREA OF AGE BR-I UNDER GE FAIZABAD
2022_MES_544902_1
8319/E8
Open Tender
Civil Works
Item Rate
180 days
Faizabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (MES) Faizabad
₹74,000
Yes
7 Nov 2022
12 Aug 2022
10 Sept 2022
12 Aug 2022
8 Sept 2022
26 Aug 2022
60 days
Amount
Demolition of brick work built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings etc., complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation etc and gettingout in soft/loose soil complete all as specified and directed.
M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete / base of post /columns etc complete all as specified and directed.
Removing excavated material (soil) at a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Returning filling in with approved excavated soil obtained from excavation including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.
M&L for brick work widh old size fly ash bricks in cement mortar (1:6), straight or curved on plan exc 6 mtr mean radious, complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work of drain walls or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for prepararion of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.
M&L for complete removal of existing decorative treatment and applying two coats of cement base paint over a coat of cement primer on wall surfaces, complete all as specified.
M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of old treated plastered surfaces of any description by wire brushing, cleaning with water and applying two coats of weather proof paint over one coat of cement primer on walls, projected portion of columns, chajjas, facias, roof etc complete all as specified.
M&L for preparation of old treated plastered surfaces of walls by wire brushing, cleaning with water and applying one coat of white wash on wall surfaces complete all as specified.
All as per Srl Item No. 12.00 above but on ceiling surfaces.
M&L for preparation of old steel & iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for writing letters or figures (Block Roman, Italic or Indian) not exc. 30 cm high complete all as specified.
Hacking out old broken glass of any thickness, size, quality or descripiton from metal frame including punching or drilling out old glazing pin/spring and providing and fixing new ones, complete all as specified.
S&F 3mm thick sheet glass, ordinary quality in square n.exc 0.5 Sqm in each pane with oil putty of glazing pins, complete all as specified.
S&F in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks or galvanised wire staples including all cuttings, wastage etc complete all as specified.
Demolition of concrete in ground floor and roof/pavings n.exc 15cm thickness including floor finishes like tiles if any of any description, complete all as specified.
M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in top of flooring / roof padding in any position, finishing the surface even and fair for flooring complete all as specified. Note: PCC for laying in roof padding shall be mixed with integral water proofing compound as per manufacturers instructiond and shall be measured separately at supply only rates.
M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in sub-base of floors, plinth protection finished the surface of concrete fair and even, complete all as specified.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not hacking) removing serviceable tiles to store and rubbish off the premises, complete all as spcified.
M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles, kota stone etc complete all as specified.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, complete all as specified.
M&L for rendering 10mm thick in cement mortar (1:4) on vertical surfaces of walls for fixing wall tiles, kota stone etc complete all as specified.
M&L for glazed ceremic coloured tiles of size 350x250x7mm / 450x350x7mm thick in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.
M&L for Machine cut kota stone slab flooring 20-25mm thick laid over cement screed base in flooring and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M&L for Machine cut Kota stone slab 20-25mm thick in vertical surfaces such as risers of steps, skirting, dado and pillars, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified.
M&L for chequered cement concrete tiles of size 20cm x20cm x 25mm thick with grey cement and pigment, laid over and including 20mm thick screed bed in cement mortar (1:6), set, jointed and pointed in neat grey cement slurry and pointed in neat cement mixed with pigment complete all as specified.
Taking up or down 20mm dia bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified.
Taking up or down 15mm dia bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified.
S&F 20 mm dia bore GI tubing, medium grade with all fittings and fixed to walls or laid in floors, complete all as specified.
S&F 15 mm dia bore GI tubing, medium grade with all fittings and fixed to walls or laid in floors, complete all as specified.
S&F in repairs, 15mm dia bore cromium plated bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified.
S&F in repairs, 15mm dia bore angle stop valve, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified.
S&F in repairs, 15mm dia bore pillar tap fancy type cast copper alloy with capstan head chromium plated screwed down high pressure with or with out lettered hot or cold with long screwed shank and fly nut, screwed for iron pipe and fixed, complete all as specified.
S&F in repairs, PVC connection 15mm bore 450mm long hexagonal brass chromium plated nuts and washers on both ends, complete all as specified.
S&F in repairs, vitreous china wash hand basin, white, flat back, size 550 X 440 mm excluding taps, chain and plug and procelain stopper but including brackets cutting for pinning in ends of brackets or erecting stand and 32mm dia PTMT waste coupling (half or full thread) min weight 32mm-45 Gms/40mm-60Gms) and PVC waste pipe, complete all as specified.
S&F in repairs, vitreous china squatting pan, Orissa pattern, size 580 X 440 mm white, with integral foot rests (excluding cistern and flush pipe) but including connection to trap and to flush pipe, anti-Syphonge pipe and including trap set in lime concrete etc and making good disturbed area to match the existing floor surfaces , complete all as specified.
S&F in repairs, 10 Ltrs PVC valveless, syphonic action type flushing cistern low level, white with inlet, ball valve, float and handle including brackets, complete all as specified.
S&F in repairs, soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall, complete all as specified.
Dismantling/demolition of breaking up drain pipes of 110mm and 75mm dia PVC (SWR), salt glazed ware or AC pipes, set in cement mortar or fixed with clamps to walls or laid in flooring etc complete allas specified.
S&F 110mm bore PVC (SWR) rain water, soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified.
S&F 75mm bore PVC (SWR) rain water, soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified.
M&L 75mm dia PVC floor trap, with grating including jointing to waste pipe, fixed in and including cement concrete (1:2:4) type B-1, complete all as specified.
Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified.
Taking down Chowkat with shutters (wihout taking off shutters from the frame) exc 1.50 Sqm but n.exc 4 Sqm, complete all as specified.
M&L 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed, complete all as specified.
S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24(a) etc, complete all as specified.
S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commericial type on both sides, complete all as specified.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing, complete all as specified.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour pvc 'C' channel having a PVC sheet strio of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails,lock rail and bottom rail on either side and as gap insert for top rail and bottom rail,Panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supply anf fixing in the frame at site as per specification and drawing, complete all as specified.
S&F steel windows with side hung shutters with glazing bars, dovetailed or welded including projecting type hinges, steel handle and steel peg stay, complete complete all as specified.
S&F steel windows with side hung shutters without glazing bars including projecting type hinges, steel handle and steel peg stay, complete all as specified.
S&F steel ventilator with top hung shutter including hinges, steel handle and steel peg stay etc complete all as specified.
M&L for mild steel framed work as in window guard bars, grills and like items, plain, let in and fixed independently in wooden frames, L or T Section support for shelves and similars articles conforming to Fe-290 Gde E-165 , complete all as specified.
S&F 4mm thick figured glass, pin headed type and glazing with oil putty or rubber packing in square n.exc 0.50 Sqm in each pane complete all as specified.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.
S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified.
S&F 150mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified.
S&F 250 mm size aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed, complete all as specified.
S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised and fixed complete all as specified.
M&L for preparation of new or previously untreated surfaces of wood work of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.
M&L for spot welding in repairs not exc 2.5 cm each with thickness of metal to be welded not exc 6 mm, complete all as specified.
Supply only Integral waterproofing compound (BIS Marked) complete all as specified.
M&L for taking down and repairs to steel rolling shutters of any description including removing and replacing defective / wornout components such as hood cover, laths, ball bearings, helical wire spring, lock, shaft pipe and straightening of existing laths as required, greasing and refixing in the same location, complete all as specified.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
Dismantling posts or struts (wood, steel or RCC) of any section including taking out embedded portion from concrete, brick work, masonary etc and making good disturbed ground complete all as specified and directed.
S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening conforming to Fe-410 W, Gde E-250 quality A and fixing complete all as specified.
Dismantling wrought iron or mild steel work of any description and in any position not other wise provided for, complete all as specified.
S&F rolled mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.
Dismantling of fencing wire any type and fixed to any type of posts, struts etc complete all as specified and as directed.
S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured), complete all as specified.
S&F mild steel work as in hand rails, balusters, running bars, wind ties including drilling holes for bolts, notching for securing wire mesh etc conforming to Fe 290 Grade E-165 complete all as specified.
S&F mild steel screw bolt (machine made) with hexagonal head at one end and screwed the other end, each screwed ends to be fitted with washer and one hexagonal nut, size of bolt 12mm dia and length of bolt exc 5cm but nexc 10cm long (from under side of head to the end in 75mm) and fixed complete all as specified.
Dismantling chain link fencing / wire mesh of any type and fixed to any type of posts, struts, running bars etc complete all as specified and as directed.
Supply only steel wire chain link fencing 75X75mm mess , secured with MS flat, straing bolt , complete all as specified.
Fixing only chain link fencing including line wires and mesh size, fixed to any type of standard rails, straining bolts etc including binding with and provision of binding wire, complete all as specified.
S&F coil concentrina 600mm dia all as per manufacture instructions, complete all as specified.
Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out soft / loose soil, returning filling in and ramming earth or broken earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 mtr and making good surfaces complete all as specified and directed.
M&L for 75mm thick cement concrete (1:4:8) type B- 2 (using 40mm graded crushed stone aggregate) as in floor complete all as specified.
Dismantling AC (corrugated or semi corrugated) /fibre glass translucent sheet fixed in roof coverings etc, complete all as specified.
S&F 0.50mm thick pre-painted galvalume aluminium zink coating GI based corrugated steel sheet of any colour as approved of 550 Mpa tensile strength as in roof covering /cladding to wall, fixed with self taping screws as per manufacturer's instructions complete all as specified and directed.
S&F mild steel work in tubular trusses /purlins /rafter / posts, etc including special shaped washer using ERW or induction butt welded tubes confoming to IS-1161-1979 Gde St-240complete all as specified and directed.
M&L for preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness laid dry in floors, aprons or paths etc complete all as specified.
M&L for 60mm thick machine pressed precast concrete M35 grade interlocking paver block, glossy and moulded with grey cement and pigment of any size and shape, conforming to IS 15658-2006, laid over sand cushioning complete all as specified. Note: Sand for cushioning shall be measured and paid for separately under respective item of Schedule 'A'.
M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cills, copings, edging to tiled path and side packing of paver etc complete all as specified.
M&L for sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified.
M&L for 20mm size broken crushed stone aggregate including spreading over floor / duct in uniform thicness complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position , complete all as specified.
M&L for precast re-inforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slabs etc, placed in position including necessary form work all as specified and directed.
S&F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire (annealed not less than 0.9 mm dia complete all as specified.
S&F Steel rolling shutters 125mm thick laths with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of red oxide zinc chromate primer; erected in position as indicated, push pull or manual type complete all as specified.
Dismantling of welded steel wire fabric or expanded metal of any thickness or mesh size, fixed with steel or wooden fillets, complete all as specified.
S&F welded steel wire fabric n.exc 4.00 Kg /Sqm, fixed to wooden or steel members, complete all as specified.
ABC CONSTRUCTION CO
Saket Traders
Jairajyadav security services
M/s SHIVAM CONSTRUCTIONS
JYOT BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .