PROVN OF DRAINAGE SYSTEM WITH CULVERT IN TECH AREA, HARDSTANDING IN FRONT OF BLDG NO P-79 AND OTHER MINOR WORKS OF CERTAIN UNITS UNDER GE KAMPTEE.

Amount

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil including necessary rolling and consolidation complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good to surface complete all as specified and directed.

M&L for 150mm thick soiling (or sub base) with broken boulders or quarried stone, interstices filled, surfaces formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for forming 12mm thick expansion joints for 150mm thick slab/ flooring filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'A' complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick with fly ash bricks, old size, straight of curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, weathering, slightly rounded or chamfered etc complete all as specified and directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No 13 above but 6mm to 8mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5 to 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc; vertical or to batter rough finished surface complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels and similar work complete all as specified and directed.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (horizontal or sloping) for flat and rough finished surfaces complete all as specified and directed.

M&L for RCC (Design Mix) M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, hardstanding and similar works, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (Design Mix) M-25 (using 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for RCC 1:1½:3 type A1, using 20mm graded stone aggregate, as in slabs supported on walls, beams and columns, in roofs and in shelves and the likes complete all as specified and directed.

M&L for providing reinforcement cement concrete type A1 (using 20mm graded stone aggregate) 1:1 1/2:3 (Nominal Mix) as in beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for 300mm reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for concrete bed for 300mm dia pipe in P.C.C. 1:4:8 type C2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and directed.

S&F 11 to 15mm mild screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 but not exc 10cm long complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide on new surfaces in any tint complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade, with all fittings and fixed to wall complete all as specified and directed.

S&F GI tubing 20mm bore, medium grade, with all fittings and fixed to wall complete all as specified and directed.

S&F rotational moulded polyethylene double layered water storage tanks (cylindrical vertical with closed top) of 1000ltr capacity, hoisted and fixed in position including PTMT ball valve 20mm and top cover including dismantling of existing water tank as specified in SSR Part I complete all as specified and directed.

S&F rotational moulded polyethylene double layered water storage tanks (cylindrical vertical with closed top) of 2000ltr capacity, hoisted and fixed in position including PTMT ball valve 20mm and top cover including dismantling of existing water tank as specified in SSR Part I complete all as specified and directed.

M&L for providing precast cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) in CM 1:4 louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

M/s DS Khekde

Bidder Name

chronicle enterprises

M/s DS Khekde