SPECIAL REPAIRS / REPLACEMENT OF OLD STREET / SECURITY / FLOOD LIGHT FITTING WITH ENERGY SAVING LED LIGHT FITTING INCLUDING CONNECTED ITEMS AND CERTAIN E/M SANCTIONED WORKS UNDER GE NASIK ROAD CAMP

Amount

Dismantling and taking down by disconnecting electric connection from existing serviceable / unserviceable / partly unserviceable street / security / flood light fittings or any other light fitting of any type / any watt, fitting and fixtures etc., and depositing to MES store yard or serviceable light fitting will be reuse in other location and making good to the disturbed surfaces etc., complete all as specified and directed at site.

Dismantling and taking down by disconnecting electric connection from existing unserviceable old street / security / flood light or any other light fitting of any type / any watt fiting and fixtures etc., complete all as specified and directed at site.

Fixing only in repairs and connecting after testing only serviceable street / security / flood light fittings of any type / any watt, fitting and fixtures etc., other location including wiring from junction box to the fitting. (street / security / flood light fittings will be reused obtained / removed against item No 01 herein above), complete all as specified and directed at site.

Supply, fix, connect and test 45 watts LED street light fitting, pressure die cast aluminium housing, heat resistance toughened glass, IP 66 protection, better optics for uniform distribution, aesthetically designed roadway luminiare with excellent thermal management, complete all as specified and directed. (Make - Crompton, Cat Ref. LSTS-45-CDL-I or eqvt. make of Havells / Philips ).

Supply, fix, connect and test 60 watts LED street light fitting, pressure die cast aluminium housing, heat resistance toughened glass, IP 66 protection, better optics for uniform distribution, aesthetically designed roadway luminiare with excellent thermal management, complete all as specified and directed (Make Crompton, Ref. LST-60-CDL or eqvt. make of Havells / Philips).

Supply, fix, connect and test 50 watts LED flood light fitting, pressure die cast with IP 66 protection, efficient high output emmitter LED for better distribution, surge protection device, complete all as specified and directed. (Make - Crompton, Cat Ref. LFL-50-CDL-M or eqvt. make of Havells / Philips).

Supply and fix in repairs T5 High efficiency / High output FTL lamp, 24 W T5 HO - 6500K complete all as specified and directed. (Make-Havells, Cat Ref. LHST27124699 or eqvt make of Crompton / Philips ).

Supply and fix in repairs Electronic Ballasts for T5 Flourescent lamps - High Performance (THD<33%), 2 X 24 W FTL complete all as specified and directed. (Make - Havells, Cat Ref. LHBTO1224034 or eqvt make of Crompton / Philips ).

Supply and fix in repairs PVC insulated 3 core 2.5 Sqmm multistranded (un armoured 2XY) copper conductor complete all as specified and directed. (Make - STANDARD / PLAZA / HAVELLS/ POLYCAB/ FINOLEX )

Supply and fix air cooled split unit air conditioner elctric driven, single phase of capacity of 1.5 TR, BEE 5 star rated. Make :- Bluestar

Supply and fix voltage stabiliser for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5% suitable for 1.5 TR split AC

S & F sub main wiring power / circuit using PVC insulated unsheathed stranded copper conductor cable 2 single core of size 4 Sqmm, earth continuity conductor of size 4.0 Sqmm to be drawn through and including PVC casing caping not less than 25 mm dia medium grade fixed on walls / roof / floors all as directed by Engineer-in-Charge. (MAKE :STANDARD / PLAZA / HAVELLS/ POLYCAB/ FINOLEX) Notes :- (i) Two wires of 4 Sqmm and one wire of 4.0 Sqmm and one run of PVC casing / caping shall be measured as one unit.

Supply and fix earth enclosures with 2 pin earth plug socket complete with MCB SP 20 Amp, flush mounting type LEGRAND / ABB / L&T

Supply, laying and testing XLPE insulated heavy duty electric cable with aluminium conductor , 1100 volts grade of size 3.5 core 70 sqmm all as specified and directed by Engineer-in-Charge.

Supply, laying and testing XLPE insulated heavy duty electric cable with aluminium conductor , 1100 volts grade of size 3.5 core 95 sqmm all as specified and directed by Engineer-in-Charge.

Supply, laying and testing XLPE insulated heavy duty electric cable with aluminium conductor , 1100 volts grade of size 2 core10 sqmm all as specified and directed by Engineer-in-Charge.

Supply, laying and testing XLPE insulated heavy duty electric cable with aluminium conductor , 1100 volts grade of size 4 core16 sqmm all as specified and directed by Engineer-in-Charge.

Supply, laying and testing XLPE insulated heavy duty electric cable with aluminium conductor , 1100 volts grade of size 4 core10 sqmm all as specified and directed by Engineer-in-Charge.

Supply and fix junction box of size 140 x 140 x 95 mm Cat part no GSJB-1414 complete with industrial connector including clamps made out of MS flat iron 30 x 5mm including connection from junction box to street light fitting with suitable size MCB and 3 core PVC insulated & PVC sheathed copper conductor cable2.5 sqmm size all as specified and directed. Make : Sintex/ equivalant

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

M & L in replacement Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

Supply , install, Design and commissioning of factory made outdoor type floor mounted LT panel board, cubical type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having Incoming MCCB 3 pole 125 A - 01 No and outgoing MCCB 3 pole 63 Amps - 03 Nos and bus bar chamber with air insulated PVC sleeved aluminium bus bar of rating 200 Amps for phases and neutral installed on porcelain insulators. Tha panel should made out of 3.00 mm MS sheet with projected globe roof for rain water protection including Neoprene rubber gasket, Bottom detachable Gland Plate complete with Nuts, Bolts and Washers, etc. and 50X50 X 6 mm thick MS angle iron frame 60 cm above and 60 cm below normal ground level work front opening single door type PCC foundation in cement concrete 1:3:6 (20 mm graded stone aggregate, testing after installation complete

Material and labour for high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 25 mm suitable for cable protection complete all as specified and directed.

Material and labour for high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 50 mm suitable for cable protection complete all as specified and directed.

Supply and fix junction box of size 250 x 200 x100 mm Cat part no GSJB-2520 complete with industrial connector including clamps made out of MS flat iron 30 x 5mm with suitable size MCB and 3 core PVC insulated & PVC sheathed copper conductor cable2.5 sqmm size all as specified and directed. Make : Sintex/ National or equivalant

Supply and fixing Garden Light CONE IP 65 elegant yet minimalstic design acts asilent observer and giving light ,diffuser at the upper portion acts a beacon of path guidance in a landcsape environment Make Havells Cat part No CONEBL8WLED857SSYMTOPC

M & L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 32 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified for one exhaust fan point controlled by one switch MAKE OF CABLE - STANDARD / PLAZA / HAVELLS/ POLYCAB/ FINOLEX & MAKE OF PVC CASING / CAPING - PRICISION / PRESSFIT / MODI . Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate

S &F Switch piano flush type single pole one way 5 amps.

S &F Ceiling rose, surface bakelite 65x50 mm three terminal

Supply & fix Exhaust fan 300 mm sweep heavy duty including 3 core copper cable & cutting holes if required etc. Make - Havells Cat Part No-Turbojet SP 1400 RPM or eqvt in Bajaj/Usha.

S & F MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 240 Volts SPN with 2 way Single door IP-43-IK09 protection grade, Make -L&T/ LEGRAND / STANDARD / HAVELLS equivalent of ABB

S&F MCB singal pole 240 Volts , 6 to 32 Amps all as specified and as directed. Make : Havells/Legrand/Philips

S & F sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 1.5 Sqmm, earth continuity conductor of size 1.5 Sqmm to be drawn through and including PVC casing capping/Conduit not less then 32/25mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge.(MAKE :STANDARD / PLAZA / HAVELLS/ POLYCAB/ FINOLEX) Notes:- Two wires of 1.5 sqmm and one wire of 1.5 sqmm for earthing and one run of PVC casing capping/Conduit shall be measured as one unit.

Supply ,install, testing & commissioning air cooled inverter split unit air conditioner electric driven , single phase 230V, 50Hz, of capacity of 1.5 TR, BEE 3 star rated Make: Bluestar/VOLTAS/SAMSUNG/Carrier

S &F earth enclosure with 2 pin earth plug sokcet complete with MCB SP 20 amp,flush mounting type LEGRAND/ABB/L&T

S & F sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4.0 Sqmm to be drawn through and including PVC CASING CAPING not less then 25mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge (MAKE :STANDARD / PLAZA / HAVELLS/ POLYCAB/ FINOLEX) .Notes:- (i)Two wires of 4 sqmm and one wire of 4.0 sqmm and one run of PVC casing/caping shall be measured as one unit.

Supply and fix LED 60W street light fitting, pressure die cast aluminum housing, heat resistance toughened glass, IP 66 protection, better optics for uniform distribution, aesthetically designed roadway luminiare with excellent thermal management, including wiring from junction box / OH line to the fitting, complete all as specified and directed.(Make - hAVELLS, Cat Ref. ENDURAPEARLPLUSSL60WLED757SASYTOPC or eqvt. make of Crompton / Philips)

Supply, fix, connect and test 50 W LED flood light fitting, pressure die cast with high power LEDs as light source, suitable for highlighting architectural features or area lighting protection, efficient high output emmitter LED for better distribusion, surge protection device, including wiring from junction box / OH line to the fitting, complete all as specified and directed.(Make - Havells, Cat Ref.JETACOMPECTOFL50WLED757 LTG or eqvt. make of Crompton / Philips)

Taking down of old street light bracket including clamps of any type/any size from pole/wall including necessary nuts & bolts as directed complete all as specified and directed.

M&L for fabrication and installation of GI pipe bracket made of medium grade tubing of size 40mm dia duly bended by hot forging after filling of sand, length 1.20 mtr including two pairs of MS flat strip clamps 30 x 5mm with GI bolts, nuts and washers complete all as specified and directed.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT Rs. 25259.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

SHILPVED

M/S MK Nair

UNITED ENTERPRISES

P C DAVE AND SONS

M/s Anil Builders

SHRI SULAI ELECTRICALS

Bidder Name

SHRI SULAI ELECTRICALS

P C DAVE AND SONS

DURGAI ELECTRICALS

UNITED ENTERPRISES

M/S MK Nair

M/s Anil Builders

SHILPVED