SPECIAL REPAIR TO PATHWAY HARDSTANDING IN AND AROUND OF CERTAIN BUILDINGS IN OMQ AREA (MAP QTRS P-364 365) AT CAMERO COMPLEX, PROVN OF DSC REST ROOM AT RTR GATE AT SUBROTO PARK, ADDN/ALTN TO ROOM NO 304 OF HQ WAC (U) BLDG AT SUBROTO PARK AND DEMOLI

Amount

Excavation in trenches n exe 1.5m wide and not exc 1.5m in depth,foe foundstion of col & foundation of waist slab casspits, men holes, pier holes etc n exc 10 sqm on plan and exceding 1.5m in depth and getting out in hard and dense soil complete all as specified and direceted.

M &L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) for foundation/ floor etc complete all as specified and directed.

M&L Hard core of broken boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Formwork to side of concrete foundations,footing,bases of column,raft & raft beam sides and soffit of foundation & plinth beam and similar work vertical or battered for rough finish of concrete flate surface complete all as specified and directed.

M& L for Formwork to sides & soffit of floor or roof beams,beam haunching,girders etc for rough finish of concrete flate surface complete all as specified and directed.

M&L for Formwork to Chajjas for rough finish of concrete flate surface complete all as specified and directed.

M&L for Formwork to sides of piller, posts, struts, pires ,columns& stanchions for rough finish of concrete flate surface complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work, not exc. 200mm thick including rough finish of concrete flate surface complete all as specified and directed.

M & L MS deformed TMT bars 10mm dia and over,cut to length,bent to shape reqd incl cranking,bending spirally for hooping etc and binding with MS wire (annealed) not less than 0.90 mm dia or securing with clip to the foundation complete all as specified and directed.

All as per item No 10 here in before but 5mm dia and over up to and includind 10 mm dia in stirrups, spacers and binders.

M&L for RCC M-25 (design mix) (using 20 mm graded stone aggregate) as in foundation filling and mass concreting complete all as specified and directed.

M&L for RCC M-25 (design mix) (using 20 mm graded stone aggregate) as in column complete all as specified and directed

M&L for RCC M-25 (design mix) (using 20 mm graded stone aggregate) as in beams contilever, bressemmers, lintals over 1.50m spam complete all as specified and directed.

M&L for RCC M-25 (design mix) (using 20 mm graded stone aggregate) as in slab supported on beams complete all as specified and directed.

M&L for RCC M-25 (design mix) (using 20 mm graded stone aggregate) as in chajja complete all as specified and directed.

M & L Brickwork with sub class 'B' bricks, straight or curved on plan exe 6m mean radius, built in 1:6 cement mortar complete all as specified and directed.

M &L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in 1:4 cement mortar complete all as specified and directed.

M & L rendering 12mm thick on other than unfair faces of brick work or conc surfaces (1:6) cement mortar finish even and fair without using extra cement including making impression complete all as specified and directed.

M & L rendering 15mm thick on fair faces of brick work or conc surfaces (1:4) cement mortar finish even and fair without using extra cement. complete all as specified and directed.

M & L rendering 5mm thick on other than fair faces of brick work or concrete surfaces (1:3) cement mortar finish even and fair without using extra cement. complete all as specified and directed.

M & L for preparation of surfaces and applying two coats of OBD over one coat of alkali resistance primer with 2 mm thick wall care putty over newly previously untreated surface of wall. complete all as specified and directed.

M & L for preparation of surfaces and applying two coats of white wash on ceiling on newly plastered surface complete all as specified and directed.

M&L for preparing new surface and applying exterior paint (weather coat, apex ultima) of required shade, two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm in new surface complete all as specified and as directed by Engineer-in-Charge.

Returning filling in including spreading, levelling watering and well ramming in layers not exceding 25 cm in soft/loose soil. complete all as specified and directed.

Spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed

M & L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) made of type B-1 (1:2:4) including all mouldings set into cement mortar 1:4 complete all as specified and directed

S & F three track sliding type aluminum window/ventilator with aluminum anodized frame of aluminum section 62.5 x 37 x 2.5 mm thick with shutters having styles & rails of aluminum section 44.45 x 44.45 x 2.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminum snap beading, screws anodized aluminum fittings such as hinges, tower bolts, handles etc including 4 mm thick ordinary plain/frosted glass complete. Including providing and fixing aluminum chequered grill of anodized section of mesh 75x75mm of 04 mm dia of bar fixed to frame with 20x20 mm aluminum flat with stainless steel wire mesh fixed with screw complete all as specified and as directed. Note : All aluminium section should be powder coated.

S & F Aluminium door single leaf with anodized aluminium frame of section 62.5 x 37 x 2.5 mm thick, shutter with bottom & middle rail of section 112.50 x 37 x 2.5 mm thick and styles & top rail of section 83 x 37 x 2.5 mm thick with centrally locking arrangement with lock 7 lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary three numbers hinges with hydraulic door closer and middle portion of door will be fixed with 3 mm ACP including necessary fittings, fixtures & aluminium snap beads complete all as specified and directed. Note : All aluminium section should be powder coated.

M & L 25mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof with WPC 3% by weight of cement. complete all as specified and directed.

M&L for three layer prefabricated atactic polypropylene polymer (APP) modified 3 mm thick membrane ( weight not less 3 kg/sqm) reinforced with 160 gms polester non-woven fabric with scratched tool before finishing roof surface. When the concrete surface is still green, the roof surface shall be throughly wire brushed washed dried up and cleaned of all foreign matter and dust prior to the application of primer on the dried surface one coat of approved bituminous primer, having density in the range of 0.87 to 0.89 / kg at 25 dgree and viscositing of 70 to 160 CPS manufactured by the same manufacturer @ 0.40 litres/sqm shall be applied. APP membrane shall be laid on primed surface tourch application mehtod after allowing 24 hours of primer to dry. Laying of APP membrane shall be commneced at the lowest level and worked upto the crest.APP membrane will normally be laid in length at right angle to the direction of slope. The overlaps shall be of minimum 100 mm on longitudinal direction and 150mm on the transverse direction. All overlaps shall be bonded with bitumen primer and levelled by the heating the overlaps with brutane tourch. There after APP membrane shall be painting with two coat of water proofing paint with aluminium finish complete all as specified and directed. Note : (i) This treatment shall be done by the approved authorised applicator. Guarantee of treatment shall be for 10 years from the date of completion of contract. (ii) Independent testing of membrane for the approval technical parameters specified hereinafter shall be carried out the approved laboratories like National test house any other Govt approved laboratory having facilities for the testing of membrane.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.

M&L Glazed coloured ceramic tiles in vertical surface/ dado 450X 300X 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F EWC vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trap complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC flushing cistern low level 10 lit capacity white, with inlet, ball valve, flote and handle including brsckets & flush pipe 32 mm dia complete all as specified and directed.

S&F padestal type vitreous china WHB white, flat back, size 550 x 400mm including brackets ,cupling and all accessories etc complete all as specified and as directed

S&F 32mm bore and 75cm long PVC flexible waste pipe for WHB/urinal complete all as specified and as directed by Engineer-in-Charge.

M&L CI floor tap, 100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S & F CI soil waste and vent pipes 100 mm dia bore sand cast pipe in any length with or without ears with cement joints laid in trench/ floors complete all as specified and directed.

S&F CI bend 100 mm dia (any radius with ducks foot toe heel rest complete all as specified and directed.

S&F CI Branch pieces, 100 mm single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F CI 100 mm vent cowls complete all as specified and directed.

S&F vitreous China bowl urinal flat back, of size 465mm x 355mm x 265mm (minimum) white with grating & union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including all fittings complete all as specified and directed.

S&F PVC connection of 45 cm long with 2 Nos PTMT side nuts screwed with iron pipe of 15 mm dia complete all as specified and as directed.

S & F corner glass shelf with bracket complete all as specified and directed.

S&F 15 mm bore pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed , fancy type complete all as specified and directed by Engineer-in-Charge.

S&F two in one bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge.

S & F stop cock/angle cock ,CP fancy type with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed of 15 mm dia of pipe complete all as specified and directed.

S & F 20 mm dia medium grade G.I. pipe,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per item Ser item No 50 here in before but 15 mm dia

S & F towel rail 600 mm long of bress chromium plated 20mm dia, D type, fixed with & incl chromium plated brass screws & wooden/plastic cleats. complete all as specified and directed.

S & F soap dish CP complete all as specified and directed

M & L rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixd in position (1000 Ltr cap) complete all as specified and directed.

S&F of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed

M & L for 75 mm thick PCC 1:3:6 type G 2 (using 40mm graded stone aggregate) as in Plinth Protection including making joints & filling with sand bitumen mastic complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, precast concrete blocks and removing debris to outside the MoD Land etc complete all as specified and directed.

M&L Plain cement concrete (1:5:10), type E-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge.

M&L Plain cement concrete (1:3:6), type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 300mm bore including packing under and hunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

Supply and fix reinforced concrete pipes class NP3 pipe 300 mm bore, ISI marked jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed

M&L Brick work with sub Class ‘B’ bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, complete all as specified and directed

M & L rendering 15mm thick on other than fair faces of brick work in CM 1:4 finished even & smooth without using extra cement inculding 3% WPC by weight of cement complete all as specified and directed by Engineer - in - Charge .

M&L Plain cement concrete ( 1:2:4), type B-1, (using 20 mm graded stone aggregate) as in surface channels and drains, benching of manholes laid to shape including necessary form works, complete all as specified.

Extra for forming fair finished drain or channels 30 cm inner girth in cement concrete, using extra cement incl form moulds mittred / stopped end etc complete all as specified and directed

M&L Plain cement concrete ( 1:2:4), type B-1, (using 20 mm graded stone aggregate) as in coping bedplates & other similar works, including necessary form works wearthering, slightly rounded angles and theading, complete all as specified.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm bore pipe, complete all as specified and directed.

Removal excavated material to distance not exceeding 100 metre and depositing where directed at level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed

M&L for providing precast reinforeced cement concrete (1:2:4) type B-1 (using 20mm graded aggregate) in man holes covers slabs/ Shelves as in slabs supported on walls, beams and columns, in floors, roofs, landings, deck slabs and in shelves and like including necessary form work, complete all as specified and directed by Engr-in-Charge.all as specified.

Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock/road cutting) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : The quoted rates including for all the materials / t&p / machinery used in this item no material can paid / measured seperately

Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exc 25 cm each layers complete all as specified and as directed by Engineer-in-charge

Removal of excavated/demolished or dismantled hard standing material for a distance exc 5 Km but n. exc 10 Km and depositing outside the defence land complete all as specified and as directed by Engineer-in-charge

Supply and fixing of GI tubing galvanised iron tubing medium grade 20mm dia with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plug sand unions etc) complete with screwed socket joints laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge.

Supply and fixing of gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 20mm dia complete all as specified and as directed by Engineer-in-charge.

M & L for Cutting and screwing to existing 150 mm dia CI / GI pipe for insertion of clamps with new fittings and fixtures complete all as specified and directed by Engineer-in-charge

Demolition of Cement Concrete in ground floors & pavings n.exc. 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed by Engineer-in-Charge.

Demolition of precast concrete paver block/chequered tiles complete all as speciified

M&L as in repair machine pressed precast cement concrete factory made glazed kerb stone of any size PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) , jointed in CM 1:4 complete all as specified as directed

M&L for two coats of synthetic enamel paint over a coat of priming paint incl preparation of concrete surface old or new exc 10 cm width or girth complete all as specified and as directed by engr in charge

S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved over 50mm thick sand cushion and 100mm thick plain cement concrete, type D-2, 1:4:8, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping complete all as specified and directed by Engineer-in-Charge.

M&L for Chequered cement concrete tiles with grey cemet and pigments 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with 15mm thick bedding layer of cement sand mortar (1:6) including 100mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base for floors finishes complete all as specified and directed by Engr In Charge.

M&L rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth with using extra cement complete all as specified and directed by Engr In Charge.

M&L for preparing surfaces of new plaster on walls and applying exterior two or more coats of APEX/WEATHER including priming coat of exterior primer applied complete all as specified and directed by Engr-in-Charge.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in coping, benching etc including necessary form work, chamfers, weatherings, throating etc. Complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr In Charge.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks frame work of man hole cover, handle and similar work conforming to Fe.290.Gde-E-165 portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts,and fixed at required place etc. Complete all as specified and directed.

M&L preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specified and directed.

M&L for preparing new surfaces (plastered or unplastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by the Engineer-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS galvanized fencing, any size or type weighting complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S & F in Repair for precast (factory casted) cement concrete kerb stone casted in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) with plan or interlocking joints (as directed), making groove in ground of desired dimension, placing in erect position Kerb stone in edging and set and jointed in cement mortar 1:6, making good disturbed surface of ground complete all as specified and directed.

M&L for preparation of new/old concrete surfaces of Kerb stone etc over 10cm in width or girth and applying two coats of synthetic enamel paint, alternate in blue/black and white colour over a coat of primer complete all as specified & as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-In-Charge.

M&L for 75 mm thick PCC type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for 60mm thick, M-30 Grade Machine pressed precast concrete pre-painted interlocking paver block any shape and size casted in plastic moulds and compated on vibratory table confirming to IS 15658-2006 with grey cement and pigment complete all as specified and directed.

M&L for removing plants/sherbs/tree branch grown on wall/junctions with roots duly rendering herbicide chemical and making good of the existing brick/concrete surfaces of area n.exc 0.50 Sqm complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of existing treatment new/old surface and applying two coat of plastic emulsion paint over 10 cm girth or width, not otherwise described complete all as specified and directed.

Supply and fix Fibre glass reinforced translucent plain decorative sheeting having thickness 3mm textured surface side lap fixed with coach screw and washer in roof, wall, chain link fencing etc complete all as specified and directed by engr-in-charge,

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-In-Charge.

M&L for vitrified ceramic tiles 9 to 10mm thick coloured / light shade, premium quality tiles (300x300/400x400)x7 mm thick as decided by EIC in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge.

Taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement mortar 1:6) finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge

M&L for preparing new/old surface of wall and applying two or more coat 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer by EIC, of required shade and colour (complete, as per manufacturer's specification). complete all as specified and directed.

M&L for preparation of old decorative surfaces including scraping down smoke dust mould, mass and efflorescent, salt and trading oils and greasy spot etc. on ceiling including cornices, plasters etc. (plastered or unplastered surfaces) and applying one coat of white (lime) wash on old surfaces complete all as specified and directed

M&L for 100mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate), as in sub base in floor/pavings etc finished fair and even without using extra cement complete all as specified and directed.

S&F aluminium chequered grill of anodized section pf mesh 100x100mm or 80x80mm of 8mm dia of bar fixed to frame with 20mm x20mm aluminium flat section with screw complete all as specified and as directed.

M&L for preparation on existing treatment new/old surface of wall and apply 2 coat of plastc emulsion paint over 2mm thick wallcare putty over 10cm girth or width, not otherwise described complete and as directed by engr-in-charge

M&L for point wiring for one light/fan/bell point controlled by one switch with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm including conduit fittings and acessories concealed in wall / ceiling or surface conduit wiring on ceiling /wall terminated in flush metal box alongwith outer cover plate for mounting modular switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size complete all as specified and directed

All as per item No 113 here in before but for one 3 pin 5 amps socket outlet on indipendent board with other switchs.

All as per item No 113 here in before but for one 3 pin 5 amps socket outlet on the same board with other switchs.

All as per item No 113 here in before but with 2.5 Sq mm cable for Independent board with one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size.

S&F switch piano, flush type single pole, one way, 5 Amps, 240 volts complete all as specified and directed

S&F switch piano, flush type single pole, one way, 15 Amps, 240 volts complete all as specified and directed

S&F socket outlet 5 pin 5 Amps complete all as specified and directed

S&F socket 16 Amps, 2 in 1, flush type complete all as specified and directed

Supply and fixing ceiling roses, surface bakelite 65mmx50mm ,3 terminals , PVC/Polycarbonate, isolated body complete all as specified and directed

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.

All as per item No 122 here in before but capacity 10 watts

Supply and fixing MCBs 10 KA breaking capacity, single pole, 240 volts, 6 to 40 amps C Curve capacity. Complete all as specified and directed

Supply and fixing MCB SPN 40 Amp , 230 volt, 10 KA complete all as specified and directed by engineer-in-charge.

Supply and fixing MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and direcetd

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM1200, Copper winding of sweep 300mm complete all as specified and as directed by Engr-in-charge.

Supply and laying jointing and testing 10sqmm, 2 core XLPE insulated heavy duty multistranded armoured and PVC sheathed LT UG cable 1100 volts grade with Aluminium conductor conforing to IS-1554 laid in trenches/ fixed on wall/ ducts/ along poles through complete all as specified and directed

SM CONSTRUCTION COMPANY (BID ID -3353967)

J S CONSTRUCTION CO (BID ID -3366103)