NIT No GE/ND-10/2025-26

Amount

M&L for prepration and Complete removal of existing treatment with machanical device of any description on old decorated wall/vertical surfaces by means of washing/rubbing/scrubbing down including removal of scrubbed materials to out of MoD land and applying two coat of oil bound distember on old prepared surface of wall/vertical surface including 1.5 mm putty and alkali resistant primer complete all as specified and directed.

M&L for preparation old plastered decorated surface surfaces, washing, rubbing down and stopping of distembered and old decorated surfaces of walls including cornices etc and applying one coat of oil bound distember complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing and applying one coat of white wash on ceilling surfaces complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

M&L for preparation of painted plastered surfaces of walls of any description and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for french polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old work with one or more coat complete all as specified and directed.

M&L preparation of old painted surfaces of wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified Ceramic tiles, double charged, light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed in cement mortar (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles double charged (light shade) 10 mm thick (Square/ rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size as in skirting laid on 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed.

M&L for 600x600mm matt finished ceramic tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed.

M&L for Glazed degital ceramic tiles of approved colour and design in vertical surfaces 600mmx300mm thick including provision of high lighter tiles/ boarder and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed.

M&L for Glazed ceramic tiles of approved colour and design in vertical surfaces 450x300x7mm thick including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Glazed ceramic tiles of approved colour and design in flooring 600x600mm jointed in neat cement slury and pointed in white or coloured cement to match incl 15mm thick screed beding cement mortar 1:6 complete all as specified and directed.

Taking down chowkhats or frame of any description exc 1.5 Sqm but not exc 4 Sqm each with shutters(without taking off shutters from the frame) complete all as specified and directed.

S&F in repair 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides complete all as specified and directed

M&L for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought frames rebated on the solid rounded or chamfered put together with glue pinnes at joints complete all as specified and directed.

Taking down chowkhats or frame of any description n.exc 1.5 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (20mm graded crushed stone aggregate) as in hold fast, lintel, steps and bends complete all as specified and directed.

S&F butt hinges 100 mm long medium weight cold rolled SS with SS hinges pin finished bright and smooth complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, length of bolt 300 mm and fixed complete all as specified and directed.

S&F Aluminium alloy, anodised barrel tower bolt of extruded section 200 mm long complete all as specified and directed (ISI marked)

M&L for two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer incl preparation of surfaces over 10 cm width of girth complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes including bedding in cementmortar on to dwarf wall orincluding fixing cantilever bracketsand connecting union to pipe,overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repair snow white vitreous china EWC single piece type 360x640x685 mm including PP Soft Close seat cover, Hinges, Dual flush cistern fittings, fixing accessories, S trap fittings complete fixed in floor with brass screw complete all as specified and directed. Make : JAQUAR CAT Part No: SLSWHT-6851S110P/ Parryware CAT Part No – C841D(S-305)/ Hindware CAT No – 92562(S-220)

S&F in repairs wash hand basin vitreous china white, wall hung of size 585x450x220 mm with full pedestal including fixing accessories, SS coupling and waste pipe complete all as specified and directed. Make : JAQUAR CAT Part No: FHT-5801/ HINDWARE CAT Part No – 10100 & 11003/ PARRYWARE CAT Part No – C0491 & C0377

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed on wall tiles complete all as specified and directed.

S&F as in repair chromium plated shower roses of size 125 mm with or without swivel joints any type including chromium plated shower arm fixing to steel pipe and union complete all as specified and directed.

S&F in repair GI tubing medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors for 15mm dia pipe concealed/open complete all as specified and directed.

S&F in repairs 25mm bore gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repair stop valves for 15mm dia pipe fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screw down high pressure crutch or butterfly handle for pipe or unions over and including extension piece and CP cap complete all as specified and directed.

S&F in repairs 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe (fancy type long swan neck) and fixed complete all as specified and directed

M&L for cleaning sunken portion of slab (Bottom & sides) and providing water proofing treatment as under :- (a) Providing min 3" concave coving with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate admixed with WPC complast X 421 IC . Cement slurry admixed with bonding compound Nitobond AR to be used for bonding of coving with RCC member. Covering CI pipes with PCC 1:2:4 type B-0 using 20mm graded stone aggregate admixed with integral WPC complast X 421 IC (Fosroc Chemicals India Ltd). (b) Drilling 50mm deep holes at a distance of 1m c/c and cleaned with water and air, fixing nozzles of 12mm dia on drilled holes, injecting non shrink cement slurry at a pressure of 40 psi and nipples plugged with quick setting compounds. (c) Applying 2 full coats of brush bond acrylic emulsion based elastromeric water proofing coating after the primer with a min time gap of 4-6 hrs between 1st & 2nd coat. (d) Applying 15mm thick plaster in CM 1:4 admixed with WPC complast X 421 IC after ponding test for a period for 72 hours of sunken floor . (e) GI tubing 40 mm dia of medium grade for spout of 600 mm long for each sunken floor.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed.

M&L for lean concrete 1:5:10 type E2 (using 40 mm graded aggregate) as in filling of sunken portion complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (40mm graded crushed stone aggregate) 100mm thick including finishing even and smooth with out using extra cement complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4,type B-1 using 20mm graded aggregate mixed with water proofing compound @ 3% by wt of cement as in sunken floors complete all as specified and directed. Notw: water proofing compound to be measured and paid separately

Supply only integral water proofing compound complete all as specified and directed.

S&F in repair stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or galvanised wire staples complete all as specified and directed .

S&F in repairs 5.5 mm thick plain sheet glass ordinary quality and glazing in metal frame in square exc 0.50 sqm in each pane complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:4 as in closing the openings complete all as specified and directed.

Taking down cement plaster on brick /concrete wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed.

M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall (external surface) in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall (internal surface) in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces and applying two coats of OBD over a coat of alkali resistant primering paint on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of weather appex paint over a coat of birla white wall care putty complete all as specified and as directed.

Removal of debris from NDC in a loading truck of 200 cubic feet and removal to a distance n.exc 20 KM complete all as specified and directed. Note : (a) Due to conjuction of space vehicle will be stand atleast 500 mtr from the debries location (b) Cost for stacking of debries from various loc is also included in the quoted rate. (c) The vehicle shall be loaded by the labour so sufficient labour shall be arrange by the contractor. (d) Contractor shall be responsible to submit the Dvr Lic, Veh RC, Police verification for obtaining permission of veh and lab from H block.

Demolition of cement concrete in ground floor and pavings not exc 15 cm in thickness below or above ground level & removing the rubbish out of MoD land complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40 mm graded agg) as in sub base complete all as specified and directed.

M&L for PU Coated cement concrete Paver tiles of size 300x300x25mm set in 15mm thick CM(1:6) including filling joints withwhite or colour cement complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including sand cushion complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, wall aprons etc laid bedded and pointed in any mortar incl mortar screed of any description including removal of debris from site complete all as specified and directed.

M&L for 20 mm thick granite work (any type ) Black or any approved coloured (table rubbed and polished in step, jambs, pillers cooking plateform, floor and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over 20mm thick cement screed base with cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incluuding Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Dismantling wrought or mild steel work of any description not otherwise provide for complete all as specified and directed.

S&F to Joist, channel, angle, or tee sections, confirming to Fe 410W gde 250 A quality fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including necessary form work of height upto 2 storey complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F 4 mm dia galvanised steel wire, 150 X 100 mm mesh, made up into mattresses or cages, lapped, wired and laid in position including closing after filling complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.with ends of barsshouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note: each line wire to be measured

S&F in repair concertina coil (PTTC) 610mm dia coil punched & tapped and provided on Y shaped complete all as specified and directed.

B Kumar and Co (BID ID -3320220)

SAGAR ENTERPRISES (BID ID -3324078)

M/S SONU ENTERPRISES (BID ID -3320976)