NieQ01/EE/MED/GTA/2020-2021

Amount

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety In ground floor (1:3:6 in proportion )

Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M 20 Grade.(ii) N.B Variety(Stone Metal)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection. (a)For works in foundation, basement and upto roof of ground floor/upto 4 m Tor steel/Mild Steel.

Brick work with 1st class bricks in cement mortar (1:4). (a) In foundation and plint

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:3 cement mortar with 20 mm thick plaster.

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.

Fire Pumping System Supply,Installation & testing of Electric Motor driven Pump Energy Efficient, IE2 Class, Apex Series, OWR 25.2; 25 HP/18.5Kw with 80mm outlet dia Stainless Steel shaft, No corrosion thrust bearing with dynamic rotatonal parts for silent operation;lead of 65 mtr with all Couplings/sockets/Taflon sealing complete in all respects fitted and fixed as per the direction of the EIC.( Make: Crompton/Kirloskar).

Supply,Installation & testing of Electric Motor driven Pump Energy Efficient, IE2 Class, Apex Series, OWP 7.52; 7.5HP/5.5Kw with 65mm dia outlet, Stainless Steel shaft, No corrosion thrust bearing with dynamic rotatonal parts for silent operation;lead of 65 mtr with all Couplings/sockets/Taflon sealing complete in all respects fitted and fixed as per the direction of the EIC.( Make: Crompton/Kirloskar).

Supply & Installation of Gate Valve as per IS: 14846 PN 1.6 80mm dia (Make: Kartar/Zoloto).

Non return Valve as per IS: 5312pn 1.6 80mm dia( Make: Kartar/Zoloto).

Foot valve Brass 100mm dia as per IS:5318 (Make:Kartar/Zoloto).

Instrumentation Items for Pump, Programmable Logic Controller PLC Part No PLCLX7S ( Make: L&T).

Pressure Guage with Isolation valve 80mm dia Gunmetal IS:5326 ( Make: Kartar/Zoloto).

Starter for pump with all accessories & Fittings.(L &T)DOL MU G25H 3 Phase 25HP/185Kw 20-32A Relay/360 Volts AC Contractor Coil.

Cable for Pump House 6mm sq Copper Sheathed HR PVC as per IS:694 Multistrand 1.1kv Non armoured (Make: Gloster/Havells 100 m/Coil).

HOSE REEL SYSTEM Supply, Installation of Hydrant Valve single headed with 80 mm inlet & 63 mm outlet instantaneous female coupling single outletIS:5290 Part No K901(Make:Kartar)

Supply & Installation of 65mm dia Rubber Lined Fibre Thermplastic Hose Pipe as per IS:636 Part No K-909-R15-G 15 meter length with male/ female coupling.(Make: Kartar).

Supply & Installation of Stainless Steel Branch Pipe with 20 mm nozzle brass, K903G (Kartar).

Supply & Installation of glass fronted 18 SWG MS Double Door Hose Cabinet Part No K918D along with all accessories suitable to accommodate 2 (two) nos. Hose of 63 mmx 15 meter long & Branch Pipe.( Make: Kartar).

Supply & Installation of Fire Hose Reel System with Hose Reel Drum Powder cated with Fire Hose Coupling/Connection with Reel length 30 Mtrs generally as specified using 65 mm ISI Mark Reinforced Rubber Lined Fire Hose Pipe as per IS:636 (all pipe & fitting together with flange neoprene gaskets nut/bolts) (Make: Kartar)

Butterfly valve TK 706-50 Cast Iron C1 ISI SS Disc50mm dia( Make: Kartar).

Air release Valve Gunmetal 65mm dia ISI K540 with Ductile Ion chamber; triple function, SS Floats/Tamper proof; Fusion bnded & Epoxy coated ( Make: Kartar)

Supply & Installation of fire Brigade Inlet connection Head2 Way ID:14181358288/IS 904 Test pressure 21kg/m3 Bronze/Gnmetal (Make Kkartar).

40mm x40mm Equal MS Angle 6mm thick ( Tata/Sail)

Anchor Fastner nut Stainless Steel APS8 x 100 mm( Make:Gkw)

MS Short Bend 80mm dia MSSBS80

MS Short Bend 100mm dia MSSBS100

MS Plate Flange 80mm dia with Holes for Nut Bolts.

100mm dia Low carbon MS Pipe ERW Class B Jindal(ISI) Conforming to IS:1239 Grade FE330 with 4.50 mm thickness and Weight of 12.10 Kg/mtr.

80mm dia Low carbon MS Pipe ERW Class B Jindal(ISI) Conforming to IS:1239 Grade FE330 with 3.50 mm thickness and Weight of 9.50 Kg/mtr.

M/S HIMALI GURUNG CONSTRUCTION COMPANY

HIMALAYAN CONSTRUCTION