SITC of Zone Indicator System and work of fabrication installation of various mechanical works in the premises of Kandivali Fire Station Kandivali W in RS ward

R3-CS-SS-09-a Providing and fixing G.I. barbed wire fencing of 14 guage having 2 ply and 4 points at 75 mm c/c in the rows and with vertical supports as specified below embeded 0.45 m in the concrete block of size 0.3x0.3x0.5m, and 1.55m above the same spaced at 2.5 m c/c with inclined stays of the same material at 20 m c/c fixed in M15 grade cement concrete base block having dimension 0.3 x 0.3 x 0.5 m, including cross wires in each bay, necessary excavation, backfilling and curing etc. complete as directed by Engineer In Charge. With MS Angle 45 x 45 x 6 mm including painting with one coat of anti- corrosive paint, and two coats of approved enamel paint and 10 rows of Barbed wire.

R3-CS-RM-95 Providing & fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings. The FRP chajja should be manufactured using unsaturated Polyester resin as per IS:6746, duly reinforced with fibre glass chopped stand mat (CSM) as per IS:11551 complete with protective gel coat U/V coating on top for complete resistance from the extreme of temperature, weather and sunlight.

R3-ME-6-6-b Cement concrete foundation using M-20 cement concrete mix with J shaped foundation bolts where required

R3-CS-SS-26 Providing and fixing M. S. black pipes for columns, including base plate & cap plate 6 mm. thick foundation bolts, nuts, etc., complete with 3 coats of approved synthetic paint etc., complete as directed. Pipes shall be of Tata or equivalent make. Dia of pole 75 mm. 'C' class.

R3-CS-SS-04 Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.

R3-CS-RW-21 Providing and fixing polycarbonate multiple wall sheet roofing 16mm thick gauge of approved make UV coated of approved make and of approved colour and with aluminium framing for fixing polycarbonate sheet using pressure plates with EPDM gasket (compatible to polycarbonate) breather tape, screws and covering the pressure plates complete and making the entire system water tight by using sealant as per architectural drawings and specification.

4 Zone Dual side LED indicator of size 4 ft X 0.5 ft in Aluminum Cabinet (Qty - 2 Nos) Specs: P10 RGB LED module (2 Nos per Zone), Size:1ft X 0.5ft Cabinet: Powder coated Aluminum, Power supply : 5V DC, Mounting: Wall/ Column /Ceiling Mount

4 Zone single side LED indicator of size 4 ft X 1 ft in Aluminum Cabinet (Qty - 1 Nos) Specs: P10 RGB LED module,

4 Zone Dual side LED indicator of size 4 ft X 1 ft in Aluminum Cabinet (Qty - 1 Nos) Specs: P10 RGB LED module (2 Nos per Zone), Size:1ft X 0.5ft Cabinet: Powder coated Aluminum, Power supply : 5V DC, Mounting: Wall/ Column /Ceiling Mount

R3-ME-2-3-d 1st category Cu armoured cables FRLS outer sheathed- 6C x 1.5 Sq.mm

R3-ME-2-12-af Cable End Termination For Copper Cables – 6C x 1.5Sq.mm

R3-ME-1-21-d SMCJB - 2818, Removable cover, Size 320 x 220 x 65mm