KMC/LTG/Z-III/2025-2026/741

SUPPLY AND INSTALLATION OF POLYVINYLIDENE FLUORIDE COATED ALUMINIUM COMPOSITE PANEL BOARD (3MM) OF ALUDECOR /ALSTONE SIZE (AS PER DRAWING)TO BE MADE SUCH A MANNER THAT IT CAN BE OPENED TOWARDS UP DIRECTION FOR TAKING MAINTENANCE

S&F OF ACRYLIC LETTER SCRIPTED IN ENGLISH/BENGALI. SIZE AND MATTER OF LETTER AS PER APPROVED DRAWING BY EIC, FRONT SIDE OF THE LETTER TO BE MADE 6MM THICK IMPORTED (WHITE-0.40) UV STABILIZED EXCELLENT TO SELF DISPLAY. MAKE- ACAST, MITSUBISHI, ALL LETTER WILL BE RAISED MINIMUM 2" TO BE FIXED BY SPECIAL TYPE OF SOLUTION. (TOTAL SQM OF EACH LETTER IS TO BE MEASUSED BASED ON ITS FRONT SURFACE AREA)

S&F WATER PROOF POWER SUPPLY SYSTEM IP65, OUTPUT VOLATGE : 12V/24V DC, 50/60HZ FREQUENCY, 108 TO 305 VAC POWER SUPPLY, >.95 POWER FACTOR(100 WATT, MODEL ELG 100)

26 GAUGE GALVANIZED IRON SHEET FOR BACK PANEL WITH ONE COATING OF WHITE PAINT, MAKE - AARTI / BANSAL / JINDAL

SCHEDULE OF RATES FOR OH LINE INSTALLATION (LT DISTRIBUTION).Erection of Poles.Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work(site including filling up the excavated earth pit with shifted soil and ramming properlyUpto 9.0 mtr. Size 0.6x0.6x1.70 mts

SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Earthing Installation ... with Pipe Electrode.Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI Medium GI pipe.

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 10 1/3.55 4

Laying on Pole with Clamps.Fixing of Cable along the lentgh of O.H. pole incl. S & F MS pole clamps fabricated from 25 mm x 6 mm MS flat incl. painting

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.(i)1st coat of aluminium paint over 1 coat of RO priming

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.ii2nd coat of aluminium paint over 1st coat

Sub Total

Please Enable Macros to View BoQ information