Improvement of Water Supply Scheme Lehra Dhurkot Block Nathana District Bathinda Under 2A

Carriage of Surkhi, sand, bajri, ballast, stone, boulders, kankar, building rubbish Carriage of material excluding initial lead of 5 Km a) Jalalabad Sand (Av. Lead 85 Km) Up to 40 km (Item No. 5.2 (i))

41 km to 60 km

61 km to 85 km

12.5mm C.P. 1:4. (Item No. 15.9)

Plastering on underside of ceiling 10 mm thick cement plaster 1:3. (Item No. 15.43)

White washing three coats. (Item No. 16.3)

Distempering with dry distemper of approved make two coats over one priming coat on new work. (Item No. 16.8)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. (Item No. 16.14)

Applying of pink primer or aluminum primer coat including preparation of surface. (Item No. 16.17)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. a) With Special Quality Paint (Item No. 16.18)

Applying priming coat with metal primer on new steel or iron work including preparation of surface. a) with Special Quality Paint (Item No. 16.21)

Painting two coats including priming coat with ready mixed paint for metallic surface in all shades on new steel or iron work. a) with Special Quality Paint (Item No. 16.22)

Supplying & fixing glass panes with glazing clips & special metal sash putty of approved make. b) Glass panes 4mm thick above 0.40 sqm area. (Item No. 18.25)

Providing & fixing CI/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts slucie valves ISI marked, 14846-2000, including jointing, testing & cost of Nut, bolt & insertion sheet all carriage complete (with the approval of Engineer-in-charge). A) Class PN-1 as per ISI a) 80mm i/d Sluice Valves Flanged (Item No. 28.27)

b) 100mm i/d Sluice Valves Flanged

c) 150mm i/d Sluice Valves Flanged

Construction of masonary Sluice Valve Chamber excluding sluice valve cover as per standard design & drawing of public health department. b) 0.90x 0.90 mtr. (Item No. 28.66)

GALVANIZED IRON PIPES AND G.I. EARTHING: Supply & erection of G.I. pipe for wiring purposes including bends, inspection boxes etc., where necessary including painting as per PWD General specification 2010 :- c) Earthing of sheet matel/ iron clad switches and metallic cases etc. with No.7/12 SWG (7/2.80mm dia) GI wire 20mm dia GI pipe partly recessed and partly on surface complete with 135 Cm long 50mm dia GI earth pipe with GI reduceing socket 50mm to 15 mm including eraction of the same, 10 mtr. below ground level with nesseccery charkol & salt mix etc. up to 13 mtr. in lenght (including boring & refiling). (Item No. 33.13 (ii))

Supply & erection of sheet metal iron clad switch on existing surface with GI bolts & nuts/rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth asper PWD specification 2010 :- (i) Sheet metal iron clad double pole swich 32 amp. 415 volts. (Item No. 33.18)

Providing & fixing Syska SSK-SRL 15W B22 LED Bulb (Cool Day Light) Complete. (Item No. NS)

Providing and installing of Submersible pumping set with pump, motor, panel board,submersible cable & column pipe complete 17.50 BHP with 6.00mm2 cable = 100m & 100mm column pipe = 50m complete. (Item No. NS)

Providing and installing 150 mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects. (Item No. NS)

Construction of V- Notch Houdi (Size 1.80 x 0.90 m) excluding cost v – notch as per standard design & drawings of Public health Department. (Item No. NS)

Providing and Fixing of V- Notch complete. (Item No. NS)

Providing, Laying,Fixing & Jointing of P . V. C Pipes 6 Kg f/sqm ISI Marked as per ISI- 4985 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.including specials & excavation for pipe line in trenches and pits upto required depth and cover on pipe minimum 1 mtr. with earth etc. complete in all respects. a) 63 mm o/d (Item No. NS)

b) 90 mm o/d

Providing house hold connection with water meter laying, jointing, fixing, testing MDPE Pipes (as approved by Engineer-in-charge) including cost of excavation, refilling water meter, CI bib cock as per IS : 210 with stainless steel spindle, 20mm i/d MDPE Pipe 2.00 mtr. 15mm i/d GI Pipe 2.50 mtr.(length on average basis) 3" i/d clamp, GM Ferrule ISI marked connection of 15 mm i/d ferrule midium specials such as tees, bends, sockets, elbows, nipples (100 mm & 150 mm) union couplings, GI hooks etc. & gun metal peet valve (heavy pattern) with hand wheels on MDPE Pipe lines laid in the ground or inside buildings, cutting, threading, making hole in wall and testing in treanches in the ground all materials should be approved make (to the approval of Engineer-in-charge) Complete Job in all respects including cost of carriage. (Refer CSR item No. 28.34b, 30.65b, 28.40a, 28.43a, 28.46) No. of Connections on existing Pipe Line (Item No. NS)

Repair of existing Connections

No. of Connections on Proposed Pipe Line

Provision for Repair/ Replacement of Control Panel for 17.50 BHP Motor. (Item No. NS)

Provision of painting / Installation of Sign Board for Water supply scheme. (Item No. NS)

Credit of old material i.e. Slucie valves etc. (-)