Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹70.8 LAccepted-AOC PLOT NO 102 VMEM ENGINEERING SERVICES PHASE II VIRAT NAGAR MODEL TOWN MODEL TOWN PANIPAT PANIPAT HARYANA 132103 | PANIPAT | HARYANA | 132103 | ₹70.8 L | L1 | Accepted-AOC L1 |
| 2 | L2₹88.3 L+₹17.5 L (24.8%)Rejected-Finance PLOT 41 A PHASE 1 R S CORPORATION COMPOUND GIDC ESTATE VITTHAL UDHYOGNAGAR ANAND GUJARAT 388121 | ANAND | GUJARAT | 388121 | ₹88.3 L+₹17.5 L (24.8%) | L2 | Rejected-Finance NOT L1 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Technically Disqualified |
| Sl No | Description | Qty | Unit | VMEM ENGINEERING SERVICES L1 | ELITEMHE INDUSTRIES PVT LTD L2 |
|---|---|---|---|---|---|
| 1.00 | Dismantling of components of Existing Hoist, LH side (East side - 10 Ton Capacity) required for revamping of the crane.
Complete dismantling and removal of the existing hoist. | 1 | Job | 2,12,000 ₹2,12,000 Lowest | 4,23,450 ₹4,23,450 |
| 2.00 | Supply, installation, testing, and commissioning of Electric Wire Rope Hoist.
Safe Working Load (SWL): 10 Ton,
New mechanism suitable for existing single box girder electric wire rope hoist of 10 Ton SWL,
All related electrical cables to and from the Control Panel to be replaced.
Height of Lift: Approx. 20 metres &
Cross Travel Length: Approx. 30 metres | 1 | Job | 27,00,000 ₹27,00,000 | 26,97,600 ₹26,97,600 Lowest |
| 3.00 | Correction of span diagonal, alignment of wheels, straightness, skewness in line of wheels if required. | 1 | Job | 2,12,000 ₹2,12,000 Lowest | 5,36,400 ₹5,36,400 |
| 4.00 | Supply, Installation, Testing and commissioning of 125 Amp 4 pole/4 run (RYBG) insulated Galvanize busbar DSL shrouded system with all required hardwares and consumables to complete the job of power feed for 10 Ton EOT crane (bay length approx -60 Meters) cranes. Details mentioned in Scope of Work. | 1 | Each | 4,91,000 ₹4,91,000 | 2,72,000 ₹2,72,000 Lowest |
| 5.00 | Supply, installation, testing, and commissioning of Hoisting Mechanism with suitable VFD control panel and braking system–
Hoisting Motor and gearbox:
Minimum 12.5 HP
Squirrel cage induction motor
Suitable for VFD operation
Up and Down rotary gear limit switch and gravity limit switch should be in-built. | 1 | Each | 4,14,000 ₹4,14,000 Lowest | 8,94,000 ₹8,94,000 |
| 6.00 | Supply, installation, testing, and commissioning of Cross Travel Mechanism with suitable VFD control panel and braking system–
Cross Travel Motor and gearbox:
Minimum 2 HP
Squirrel cage induction motor
VFD compatible | 2 | Each | 3,13,000 ₹6,26,000 | 1,78,800 ₹3,57,600 Lowest |
| 7.00 | Supply, installation, testing, and commissioning of Long Travel Mechanism with suitable VFD control panel and braking system–
Long Travel Motor and gearbox:
Minimum 3 HP
Squirrel cage induction motor
VFD compatible
Long travel twin drive gear motor with DC brake (attachable brake release lever type). | 2 | Each | 3,54,000 ₹7,08,000 | 2,68,200 ₹5,36,400 Lowest |
| 8.00 | Control System:
Design, supply, installation, and commissioning of VFD-based control panel, complete with:
All protections (overload, short circuit, phase failure, over-temperature, etc.)
Emergency stop arrangement
Suitable enclosure for hangar environment
Control wiring, cable trays, flexible festoon cables, earthing, and termination included. | 1 | Job | 2,10,000 ₹2,10,000 Lowest | 6,55,600 ₹6,55,600 |
| 9.00 | Crane Controls:
Supply and provision of both:
Remote Control and
Push Button Pendant Control. | 1 | Job | 1,81,000 ₹1,81,000 | 1,78,800 ₹1,78,800 Lowest |
| 10.00 | Hoist Service Platform
Supply and installation of service/maintenance platform mounted at the bottom of the hoist cradle.
(Minimum 1 metre clear working space on all sides for future maintenance)
Flooring with chequered plate Insulated flooring arrangement consisting of Wooden insulation layer and Rubber insulation sheet (both mandatory).
One side long travel service platform (approx. 2 mtrs x 2 mtrs or as per requirement) to be fabricated and attached to the crane with monkey ladder and hand rail.
Cross girder walkway widening min 350 mm along with C Channel and 5 mm thickness chequered plate and hand rail.
For existing DSL copper brush holder service platform to be fabricated (min size 2 mtrs x 2 mtrs or as per requirement) | 1 | Job | 1,52,999 ₹1,52,999 Lowest | 4,17,200 ₹4,17,200 |
Tender Value
Refer Docs
EMD Value
₹1.9 L
Closing Date
3 Jun 2026, 2:00 pmClosed
Dy GM MMD
AIESL OAP KALINA SANTACRUZ EAST
Carrying out Major Maintenance upgradation of EOT Cranes 10 Ton capacity in Hangar 2 to be carried out by external agency on SITC basis at AIESL Engineering premises OAP Santacruz East Mumbai400029
2026_AIESL_277380_1
AIESL/BOM/MMD/EFD/02-01A/119
Open Tender
Electrical Works
Works
AIESL Engineering Premises
As per the tender document
2 documents required · 2 mandatory
₹0
₹1.9 L
Yes
As per the tender document
16 Sept 2026
13 May 2026
4 Jun 2026
13 May 2026
3 Jun 2026
21 May 2026
13 May 2026 - 3 Jun 2026
20 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of components of Existing Hoist, LH side (East side - 10 Ton Capacity) required for revamping of the crane.
Complete dismantling and removal of the existing hoist. | - | Job | 1.25 | - |
| 2 | Supply, installation, testing, and commissioning of Electric Wire Rope Hoist.
Safe Working Load (SWL): 10 Ton,
New mechanism suitable for existing single box girder electric wire rope hoist of 10 Ton SWL,
All related electrical cables to and from the Control Panel to be replaced.
Height of Lift: Approx. 20 metres &
Cross Travel Length: Approx. 30 metres | - | Job | 1.25 | - |
| 3 | Correction of span diagonal, alignment of wheels, straightness, skewness in line of wheels if required. | - | Job | 1.25 | - |
| 4 | Supply, Installation, Testing and commissioning of 125 Amp 4 pole/4 run (RYBG) insulated Galvanize busbar DSL shrouded system with all required hardwares and consumables to complete the job of power feed for 10 Ton EOT crane (bay length approx -60 Meters) cranes. Details mentioned in Scope of Work. | - | Each | 1.25 | - |
| 5 | Supply, installation, testing, and commissioning of Hoisting Mechanism with suitable VFD control panel and braking system–
Hoisting Motor and gearbox:
Minimum 12.5 HP
Squirrel cage induction motor
Suitable for VFD operation
Up and Down rotary gear limit switch and gravity limit switch should be in-built. | - | Each | 1.25 | - |
| 6 | Supply, installation, testing, and commissioning of Cross Travel Mechanism with suitable VFD control panel and braking system–
Cross Travel Motor and gearbox:
Minimum 2 HP
Squirrel cage induction motor
VFD compatible | - | Each | 1.25 | - |
| 7 | Supply, installation, testing, and commissioning of Long Travel Mechanism with suitable VFD control panel and braking system–
Long Travel Motor and gearbox:
Minimum 3 HP
Squirrel cage induction motor
VFD compatible
Long travel twin drive gear motor with DC brake (attachable brake release lever type). | - | Each | 1.25 | - |
| 8 | Control System:
Design, supply, installation, and commissioning of VFD-based control panel, complete with:
All protections (overload, short circuit, phase failure, over-temperature, etc.)
Emergency stop arrangement
Suitable enclosure for hangar environment
Control wiring, cable trays, flexible festoon cables, earthing, and termination included. | - | Job | 1.25 | - |
| 9 | Crane Controls:
Supply and provision of both:
Remote Control and
Push Button Pendant Control. | - | Job | 1.25 | - |
| 10 | Hoist Service Platform
Supply and installation of service/maintenance platform mounted at the bottom of the hoist cradle.
(Minimum 1 metre clear working space on all sides for future maintenance)
Flooring with chequered plate Insulated flooring arrangement consisting of Wooden insulation layer and Rubber insulation sheet (both mandatory).
One side long travel service platform (approx. 2 mtrs x 2 mtrs or as per requirement) to be fabricated and attached to the crane with monkey ladder and hand rail.
Cross girder walkway widening min 350 mm along with C Channel and 5 mm thickness chequered plate and hand rail.
For existing DSL copper brush holder service platform to be fabricated (min size 2 mtrs x 2 mtrs or as per requirement) | - | Job | 1.25 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
Tender_Documents.pdf
Tender Documents • 2.62 MB
BOQ_323951.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .