Construction of Electrical Components and pump room of Kathgarh Lift Irrigation Scheme STAGE-2 Off-taking at BURJI 38810/R Bist Doab Cana

Electrically driven horizontal split casing pumps for delivering 311 LPS each (1120 m3/ hour) raw water against a Head of 100 meter with glass flake coating on inner casing and impeller and coupled on MS fabricated base frame with suitable size HT motor (11 KV), motor rating should be considered atleast 20% above at BEP, including cost of foundation bolts, flexible coupling & coupling guard, tappers & other contingent material fixed in position complete in all respects. Make of Pumps : Mather & Platt (WILO)/ Kirloskar / KSB/BHEL / Grundfos. Make of Motor: Crompton/ABB/ Kirloskar / Siemens/BHEL/Marathon etc. (3W+1SB)

Supplying, installing, testing and commissioning of 11 KV HT Panel consisting of (i) 2 Nos. Incomers 11 KV, 800A, 31.5KA/1sec with other accessories (ii) 4 nos. Outgoing feeders (4 no. for HT motors with motor protection relay ) 11 KV, 125A, 31.5KA with other accessories) (iii) 1 No. Bus coupler with VCB 11 KV, 800A, 31.5KA/1sec with other accessories(v) Power cables and termination kits etc.

Erection and commissioning of 11 KV VCB 800A (Make: ABB/CROMPTON/Schneider/ BHEL/ C&S/Kirloskar etc.) along with metering and protection for isolation of incomer supply suitable for two nos.terminations for outgoing.-

Provision of sump level sensor for dry run protection of pumps and tripping of motor VCB individually (the minimum water level to be Calibrated/ fixed by the field)

Supply, erection, testing & commissioning of HT Shunt Capacitor of suitable size for raw water pump and motor of 650 H.P mentioned in item 1 for improving power upto 0.95 lagging & as per I.S specifictaions make: ABB/ Areva / Schinider/L&T/CAPCO etc

Supplying, installing, testing and commissioning of flux compensated magnetic amplifier (FCMA) type high Voltage soft starters suitable for operation at 11kV, 3 phase, 50 Hz A.C supply and suitable for connection to the phase segregated neutral terminal Box of pump/ motor. Make: ABB/ Essen/SCHNIEDER/L&T/Siemens etc

Supply, erection, testing & commissioning of 11 KV cable from Main Incomer to panel / Panel to motors/ to substation grade aluminum conductor XLPE 3 core 150 mm2 cable suitable for supplying for 11 KV make Make: CCL/ ICL/ FGL/ Havells/ Finolex etc.

Supplying, erection, testing & commissioning of cable end joints suitable for 185 mm2 type Heat shrinking 3 core XLPE cable with required thimbles of same size.The joint should be strictly as per relevant ISI specifications.

Supplying, erection, of earthing strips 50mmx 6mm GI complete in all respects including excavation jointing cutting through walls, riveting etc complete in all respects as per relevant IS standards.

GI wire 8 no. earthing HT panel and substation including accessories, thimbles etc.

Supplying, erection of aluminum armoured cables of suitable size and copper cables complete in all respects with required thimbles including clamps / supports along the wall for prevention against water ingress. Cable makes : CCL/ ICL/ FGL/ Havells/ Siemens etc.

(i) 95 mm2 (3.0 core) – XLPE aluminium armoured cable

(ii) 50 mm2 (3.50 core) – XLPE aluminium armoured cable

(iii) Control cable (1.5mm2) minimum 8 core copper armoured

(iv) Control cable (12 pair twisted, 1.5mm2) copper screened armoured cable

(v) Control system power cable (3 core, 2.5mm2) flexible copper armoured cable

Earthing for elecric motors & panels etc complete in all respects as per electricity rules & the complete job shall consist of following components :

(a) P/F copper earthing with 50 cm x 5 mm copper strip & 60cm x 60cm copper plate 3mm thick in 3.65m deep pit complete i/c required quantity charcoal and salt upto earthing station as per electrical rules.

(b) Supply and erection suitable size under ground GI pipe 2" dia B-Class for protection of G.I. earthing strips. As per IS Code 3043 of 2018 Make: Jindal/Tata/Surya etc

Providing and fixing of battery bank and battery charger of suitable size for VCB panel at item 2 including protection, metering, annunciation, charger, cabinet, wiring etc complete as per detailed specifications attached in the DNIT Make: ESSEN/Exide/ ABB / Siemens etc and Make of battery Exide etc.

Supplying, Erection, Testing, Commissioning of outdoor type 25 KVA capacity silent type Diesel Gen set CPCB approved BS-VI with AMF panel including cost of suitable capacity inbuilt diesel tank, AVM pad with industrial silencer, exhaust pipe etc. complete in all respects Make: Cummins/ Volvo/Kirloskar /Caterpillar etc

Supplying, installing ,Testing, Commissioning of 800 KVA, 3 Phase, 4 wire, 50 cycle, oil immersed, naturally self cooled 11kV/.433kV.Transformer double copper wound. The transformer shall be contained in mild steel plain of radiator cooled tank and temperature shall not exceed 50deg C for winding measurement by resistance shall not exceed 50Deg C over an ambient temperature of 50deg C.Tapings will be on HV windings to obtain a variation as +5% to -10% in steps of 2.5% through OFF LOAD TAP CHANGER. The Transformer is designed and tested to comply with National and International Standards- latest norms/ PSPCL Norms .Make: Kirloskar/Areva/ABB/Crompton/Amson etc.

Supplying Installing, Testing, commissioning of LT distribution panel having provision for outgoing conections for operation of vaccum pumps, dewatering pumps, acuaters & other lighting loads etc. as per site requirements and also compatible with AMF panel of DG set complete consisting of contactors, timers, earth fault protection, phase corrector, overload, under/over voltage, phase loss protection and interlocking for sequential operation of motors in each panel and having MCCB of 300 AMP at incomer and busbars complete panel should be enclosed type vermin proof and of cubical box made of 14 G MS sheet powder coated with siemens grey color including compatiblity with scada system to the entire satisfaction of EIC. make: L&T/ Seimes/ABB/ BCH etc.

Supply and erection of 45W LED street light along with fitting on the pole including the cost of petty material required for complete indoor and outdoor lighting complete in all respect.

Construction of RCC M25 foundations including dewatering of subsoil water. The drawing and design shall be submitted by the firm for approval by department for the following :

Electrically driven pumping sets.

Diesel driven pumping sets.

Vacuum pumping set.

HT Panel

Silent Diesel Gen set

Transformer 800 KVA

Construction of Transformer Yard of size 5mtr. x 5mtr. x 2mtr. high consisting of barbed wire fencing 6 No. horizontal wires and 2 No. crossed wires along with MS angle irons size 40 x 40 x 5 mm at a spacing of 2.5 m c/c grouted in cement concrete block 9''x9''x1'-0" M-20 complete in all respects including synthetic enamel painting.

Prov. & fixing of MS Gate size 1.2 mtr x 2.0 mtr in Transformer Yard along made out of M.S. angle 35x35x5mm and M.S. flat 25 x 5mm with locking arrangement, PCC, foundation etc.

Supplying and fixing of nominal 2.5mm ±10% thick fire retardant mats conforming to IS: 15652: 2006 and meeting the requirement of IS 5216, IS 8437, IEC 479 Pub-I along with suitable adhesive/chemical bound resin water proof compound and sealing material as per in service recommendations class- C of IS 15652 and suitable for class A up to 3.3 KV installations.

Providing and Fixing of 6 No. Fire Extinguishers each of 5 kg. capacity CO2 type ISI mark fire extinguisher complete with pressure gauge cylinder and set of 4 no. sand buckets including M.S. stand complete in all respects including painting with red paint. Make: Life guard/Unitex/Alpha/ Fire bird etc..

Design, engineering, manufacture, supply, installation, testing and commissioning of approx. 650 kWp grid-interactive Solar PV power plant to be installed partly over canal (canal-top) and/or along canal bank / in- ground as per site conditions, including all civil, structural, mechanical, electrical and instrumentation works, complete in all respects, as directed by Engineer-in-Charge. (Capacity may vary as per available area)

Providing and Fixing of Danger Board plate 11000/440 volts.

Supply and fixing shock treatment charts in Hindi and English language in electrical panel rooms

Supply of first AID BOX complete with first fill of medicines as per IE rules.

Provision of HT 11 KV rubber gloves.

11 KV GRID/ switchyard for all the above equipments /installations

(a) 500mm i/d size

(b) 300mm i/d size

Supplying & fixing of Actuator for D.I. Sluice Valves along with contingent material required for their fixing with specials complete in all respects as per directions ocomplete in all respects. complete as per DNIT specifications. Make of Sluice Valve: DVD/Kirloskar / VAG /AVK/ IVC etc.

(a) 500mm i/d size

Supplying & fixing of D.I. Sluice Valves PN 1.6 of size 1000 mm i/d of Metal Seated D.I. Gate valve Non Rising stem with by-pass & gear operated, for water applications material construction body, bonnet, wedge and distance piece of ductile iron . Make of Sluice Valve: DVD/Kirloskar / VAG /AVK/ IVC etc. complete as per DNIT specifications.

Providing and fixing of D.I. Swing Check valve (Non Return Valve) of PN 1.6 of size 500mm i/d slanted/straight seated with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG40/SG Iron 420/12. All the inside and outside of the body is to be coated with double coating with electrostatic epoxy powder. Drilled as per IS: 1538. Make of Sluice Valve: DVD/Kirloskar / VAG /AVK/ IVC etc.

Supply, installation, testing, and commissioning of the pump set, complete with all accessories including foot valve size 500 mm along with necessary fittings, and connections as required at site. Drilled as per IS: 1538. Make of Foot Valve: DVD/Kirloskar / VAG /AVK/ IVC etc. complete as per DNIT specifications.

Providing and fixing DI Air valves of PN 1.6 of sizes D.I. Double acting chamber suitable for sizes i/d M.S. pipe line with body and cover in ductile cast iron of grade GGG 40, all internal parts such as float, shell etc. & all cover bolts of austenitic alloy steel and gaskets and seals of EPDM of grade W 270 with Electrostatic epoxy powder coating (EP-P) inside and outside colour blue RAL 5005.with body and cover in ductile cast iron of grade along with manual operated gate valve. Make of Sluice Valve: DVD/Kirloskar / VAG /AVK/ IVC etc.

(a) 200mm i/d size

(b) 150mm i/d size

Providing and fixing M.S. pipe made out of 8mm thick MS sheet of reputed manufacture like TATA / SAIL / RASTRIYA ISPAT etc. including painting with two coats anti corrosive paint complete in all respects.

Providing and fixing M.S. pipe made out of 10 mm thick MS sheet of reputed manufacture like TATA / SAIL / RASTRIYA ISPAT etc. including painting with two coats anti corrosive paint complete in all respects.

Providing and fixing M.S. SPECIALS made out of 8mm thick MS sheet of reputed manufacture like TATA / SAIL / RASTRIYA ISPAT etc. including painting with two coats anti corrosive paint complete in all respects. Flanges thickness should be compatable to PN 16 standards

MS tee 1000mmx1000mmx1000mm i/d

MS increaser 500mm x 1000mm i/d

Slipon flanges with rubber insertion and nut bolts etc complete for 500mm (20") i/d

Slipon flanges with rubber insertion and nut bolts etc complete for 400mm (16") i/d

Slipon flanges with rubber insertion and nut bolts etc complete for 350mm (14") i/d

Slipon flanges with rubber insertion and nut bolts etc complete for for 1000mm (40") i/d

Slipon flanges with rubber insertion and nut bolts etc complete for for 800mm (32") i/d

Slipon flanges with rubber insertion and nut bolts etc complete for for 300mm (12") i/d

MS concentric reducer 500 mmx 350 mm

MS bend 300mm 45-90 degree

MS flange 200mm (8")

MS flange 150mm (6")

MS reducer 1000x1200mm

MS Blind flange 1000mm

MS Blind flange 1000mm ( for Inspection Chamber)

Providing and fixing of puddle collar size i/d MS pipe line suitable for PN 16 suitable thickness complete in all respects of following sizes of MS pipe lines :

(a) for 500mm (20") i/d

(b') for 300mm (12") i/d

(a) Supplying & laying of 50mm i/d G.I. pipe line B-class including specials complete in all respects for connections with vacuum pumps.Make : TATA / JINDAL etc.

(b) Supplying & laying of 25 mm i/d G.I. pipe line B-class including specials complete in all respects for connections with vacuum pumps.Make : TATA / JINDAL etc.

Supply & erection of Electrically driven vacuum pumping set DV-50 complete with accessories mounted on MS fabricated common base plate with 10 HP motor including all required piping & making connection with electrically driven pumping machinery. Make:Kirloskar/ WPIL/KSB/Crompton etc.

Supply & erection of diesel driven vacuum pumping set DV-50 complete with accessories mounted on MS fabricated common base plate with 10 HP motor including all required piping & making connection with diesel driven pumps. Make:Kirloskar/WPIL/KSB/Crompton etc.

Providing and fixing of full bore/insertion type compact electromagnetic flow meter of 500mm dia alongwith tapers comprising of flow censor, flow transmitter-cum-computing unit, UPS power supply/ instrumentation cables and other contingent material required for fixing the meter complete in all respects. Make : ABB/ SIEMENS/ KROHNE MARSHALL/EUROMET/Schnieder etc.

Providing and fixing of dewatering submersible pumping set 7.5 HP, 1000LPM Head @ 13 mtr. capacity including piping such as suction, delivery, peet valve & other accessories up to disposal point complete in all respects of Kirloskar/WPIL etc. make and auto scouring arrangement.

Providing and fixing of gylcerin filled 150 mm SS pressure gauge of reputed make on delivery of all pump sets /delivery header make: Bombarider/ Warree/ Feibig/ Equivalent etc. of 0-14 kg/cm2 withh suitable needle valve of 3/4 inch piped and llied accessories omplete in all respects.

Design, manufacture, supply, erection, testing and commissioning of 12.5 Tonne EOT Cross Gantry Crane System for pump house including double-girder EOT crane, hoist, cross travel and long travel mechanisms, gantry girders,without rails (as to be in scope of pump house work), end carriages, brakes, electrical control panel, pendant/remote control, festooning system, buffers, safety devices, structural supports, testing at 125% load, and all accessories complete as per IS 3177 / IS 807 and as per direction of Engineer-in-Charge


‚
ˆ
‰
ÿProviding ,Laying, testing and commissioning, cables in perforated /ms ladder type tray, the laying work involves, clamping the cable tray with fasteners and metallic clamps as following. Cable tray : 300mm/50 mm/1.5mmX Cement concrete 1:2:4 Mixing by mechanical means using concrete mixer volumetric type OFirst

Providing ,Laying, testing and commissioning, cables in perforated/ms ladder type tray, the laying work involves, clamping the cable tray with fasteners and metallic clamps as following Cable tray : 150mm/50 mm/1.5mm

Providing and fixing of MS work required for fabrication of ms grating, Grills, frame work cable supports etc

Supply, installation, testing and commissioning of Surge Protection System as per WRD conducted surge analysis consisting of air vessel/surge tank with all appurtenances, surge anticipating valve (ARMAS pilot operated), air release/vacuum valves (PN 16), non-slam check valves, interconnecting DI/MS pipes, flanges, specials, pressure gauges, compressor with control panel, electrical connections and all incidental works required for proper functioning of the system, complete in all respects and as directed by Engineer-in-Charge.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling excavated surplus soil

Ordinay soil Mechanical means .Depth upto 3 m

Compaction of earthwork &Preparation of sub grade including loosening, leveling of earth 225mm thick top layer,roughdressingofsoil, final dressing of earth to give level, camber ,watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. (In case of link roads earth work to be done by villagers

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level

12.5 mm thick cement plaster 1:4

Extra for cabove 4 meters (where any single storey exceeds 4 metres in height) for every additional height of 2 metres or part there of for Brick Work/ Concrete Block/ Clay Block.

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer asper IS:1791 andvibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for columns(Square or rectangular or polygonal in plain)

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Extra rate for shuttering work done above 4metres height (where any single storey exceeds 4metres in height) for every additional height of 1 metres or part thereof

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer asper IS:1791andvibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Terracing consisting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing.

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified

Centering and shuttering for faces of walls, partitions, retainingwallsand the like (vertical or battering including attached pilasters buttresses etc

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Providing and Fixing in position collapsible steel shutters, with vertical channels 20mmx10mmx2mm and braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T iron 40mmx40mmx6mm with 38mm dia steel pulleys, complete with bolts, nuts, locking arrangements, stoppers, handles, etc. complete in all respects.

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete

Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects

RECESSEDPVCCONDUITPIPEWIRING SYSTEM WITH MODULAR SWITCHES: Wiring inPVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe20mm/25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealedmetal boxes (1.6mm thick with Brass lugs) required forsuitablenumberof modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp.Switches,16/20Amp.switcheswith indicator etc. andcoveredwithFramePlate etc., PVC connector (For FanBoxandCall Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes(FourwayPVC1½"deepfor wall sand CI3" deepforceiling),bondingto earthwithPVC insulatedcopper conductor singlecoreFRcable (ISImarked) 1sq.mm, 1100volts grade (For 6Amp. wall socket & plugcontrol point) andotherpettymaterial etc., including the cost of abovematerial, cutting and filling up of chases (with finishing the surface):

Wiring fan point (With fan box)

Wiring light point

Wiring 6Amp. wall socket point

Wiring6Amp. Plugcontrol comprisingwall socket point

Wiring 16/20Amp. power plug control point

Wiring light point with double control switches.

On LoadChangeOver SwitchFour Pole 63amp., 415volts

PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE:

Supply and erection of PVC insulated PVCsheathedFR(2Core) roundflexible wire with copper conductor cable (ISI marked) confirm toIS:694/1990 leftbare in pipe or on surface with cleats of suitable sizecomplete inall respect as desired by the Engineer-in-charge:

Overall size 1.5sq.mm (48/0.20mm), 2Core

CABLE TRAY:

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surfacewith thehelpofMSangle iron support (to be paintedwith approved paint)ofsize 50mmx50mm x 6mmthick tobefixedwithfastners/nut&boltsetc., completeinall respectasdesiredbythe Engineer-in-charge and as per PWD General Specifications:

Wall paintingwith plastic emulsion paint of approvedbrandandmanufacturer togivean even shade (two or more coats)

Deodar wood doors shutter windows shutter includinghinges, screwandcords etc. Complete fixed in position

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory processor with vibro hydraulic compaction machine and of approved size and design/shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc,all complete as per directions of Engineer-in-Charge.IS CODE 15658-2006

Water Bound Macadam Grading II (without screening for low volume Roads/undersigned Roads

Providing, laying, spreading and compacting stone aggregates of Grading II towater bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheeled roller 8-10 tonnes instages to propergradeandcamber,applyingandbrooming requisite typeof bindingMaterials to fill up the interstices of coarse aggregate, watering and compacting to the requireddensity completeas per technical specifications

Compacting original ground below road crust

Loosening, leveling and compacting original grounduptoa level of500mmbelowroadcrust, mixedwithwater at OMC, levelled, gradedand compacted in layersby rollingsoas toachieve minimumdrydensityasgiven inTable300-2 for sub grade construction as per technical clause 305 of MORT&H specifications

Precast Cement Concrete Kerb

Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165 mm and top width 115mm made over strong vibratory table and fixing with cement mortar1:2 as perMORT&H specifications

Wrought iron &Mild steel ladders, framed grills, gratings etc.with ends of bars riveted or molded forged framed window guards,barred irondoors stair case iron railing etc. including cost of bolts and nuts, screws,welding rod complete fixing in position

1.2 Meter High G.I. Barbed Wire Fencing

1.2meter highG.I. barbedwire fencingwith1.8 meterangle ironposts40x40x6mmplacedevery 3meterscentretocentre0.6meterbelowground level, every 15th post, end post, corner post suitably strutted and providedwith 9 horizontal linesandtwodiagonalsinterwovenwithhorizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75mfor eachpost completeasper technical clause 808 of MORT&H specifications CC 1:3:6

any other

Please Enable Macros to View BoQ information