SPECIAL REPAIRS TO ROAD AT GTC IN VARANASI CANTT UNDER GE (EAST) ALLAHABAD.

Amount

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. NOTE: (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.

M&L for premix bituminous macadam laid (except aggregate matrial), rolled and compacted to required gradient and camber using binder (paving bitumen VG 30 grade) with 4% by weight of total mix all as specified (consolidated thickness 75 mm or less) all as specified in particular specifications. Note:- (i) The quoted rate shall be worked out on the basis of binder contents (bitumen VG-30 grade) of 4% by weight of total mix. (ii) Work shall be executed as per design mix as approved by GE and less bitumen shall be deducted from the quoted rate.

S&F in repair cat eye of dimension 8.10x11.56x1.7cm, plastic body having two ways reflector with abrasion resistant lens including fixing arrengement as per manufactures instructions complete all as specified and dircted. Make:- Ennis (stimsonite) (model No C-80 FI) or equivalent make 3M/TATA as approved by GE.

M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm with paving bitumminous primer VG-10 grade and putting required (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller for pot holes exc 30mm depth complete all as specified and directed.

M&L for cleaning old dirt, oil/ grease spots and foreign materials etc, from road surface and applying 2.5mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved, having clear and sharp edges over road surfaces by using thermo plastic paint applicator machine and necessary T&P, including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arragement for traffic during operation etc. complete all as specified and directed. NOTE: Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecto rizing beads in required proportion as per MORTH specification and conforming to relavent IS.

PERFECT ENTERPRIOSES

M/S A P CONSTRUCTION

K L KALSI