PROVN OF DHOBI GHAT TO OTM ACCN FOR INF BN NO 2, WATER UNDERGROUND STORAGE FACILITY OF 238 FD, STAIR CASE WITH TWO WOODEN DOOR, SECURITY LIGHTS FOR 115 INF BDE CAMP, GEYSER FOR SINGLE OFFRS AND LIGHTNING CONDUCTOR AT DHANA MILITARY STATION.

Amount

Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, complete all as specified and directed.

Excavation over areas, not exc 1.5m deep and getting out in Hard/ den-se soil, complete all specified and directed.

All as per item No. 2.00 above but exc. 1.50m but n.exc 3.0m deep complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc. 0.50 cum, getting out, in soft/loose including returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance n.exc 50 m and making good surface etc., complete all as specified and directed.

Removing excavated materials (soil) to a distance n.exc 50 M and depositing where directed at a level not exc.1.5 M above the starting point complete all as specified and as directed.

Removing excavated soil to a distance exc. 50m but not exceeding 100 m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Material & Labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling mass concrete, complete all as specified and directed.

Material & Labour for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping including weathering slightly rounded or chamfered angles and throating including use & waste of form work complete all as specified and directed.

Material & Labour for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

Material & Labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material & Labour for 75mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floors etc, complete all as specified and directed.

Material & Labour for providing 100 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n. exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

Material & Labour for mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc., complete all as specified and directed.

All as per item No. 14.00 above but 6 to 8mm dia complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished curved surfaces of concrete complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments and similar work including attached pillasters, buttresses etc vertical or to batter fair finished flat or curved surfaces of concrete etc, complete all as specified and directed

Material & Labour for RCC M30 in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc., complete all as specified and directed.

Material & Labour for RCC M30 in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed

Demolition of brick work built in cement mortar of any description including quoins arches but excluding ashlars facing, complete all as specified and directed.

Material & Labour for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cm 1:4, complete all as specified and directed.

Material & Labour for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6), complete all as specified and directed.

Material & Labour for rendering 15 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4) Mixed with water proofing compound @ 3% complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

Material & Labour for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

Material & Labour for Broken boulder/stone hardcore of gauge exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface, complete all as specified and directed.

Material & Labour for Preparation of new plastered surfaces of wall and applying two coats of Exterior emulsion paint over a coat of primer, complete all as specified and directed

Material & Labour for 75mm thick rough dressed stone slab flooring in beating stone with CM (1:3) for dhobi ghat, complete all as specified and directed.

Supply, laying and testing, galvanised iron pipe medium grade 20 mm dia with all fittings such as tee, bends, elbow, sockets, reducer, union etc of medium grade ISI marked fixed to walls /floors/ceiling in trenches including groove cutting for concealed plumbing and making good the damaged surfaces, complete all as specified and directed.

Supply & fixing stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for of 20 mm bore GI tubing, complete all as directed by Engineer-in-Charge.

Material & Labour for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

Material & Labour for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

Supply & fixing Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size, complete all as specified and directed.

Supply & fixing Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

Supply & fixing only mild steel cold rolled butt hinges medium weight 100 mm long, complete all as specified and directed.

Material & Labour for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Material & Labour for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.

Supply & fixing rolled mild steel sections in stairs (framed) including stringers, trades, landing, balusters, hand rails etc. including cleats, brackets, etc. and conforming to Fe 410-W (Gde E250) quality-A, complete all as specified and directed.

Supply & fixing rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and conforming to Fe 410-W (Gde E250) quality-A, complete all as specified and directed.

Supply & fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed.

Supply & fixing mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long, complete all as specified and directed.

Supply and fixing, testing and commissioning energy saving LED street lighting "pressure die cast aluminium housing with toughened glass and individual LEDs with secondary optics and IP 66 protection street light luminaries" comprising of epoxy powder coated housing, enclosed with glass cover in frame 72 W mounted on MCPCB, complete all as specified and directed. Make :- Bajaj, Cat Part No:- BRTFG 72 LED V3 & equivalent in Havells/Philips/ Crompton Greaves.

Supply & Fixing GI bracket made out of GI Pipe light grade of size 40mm, 1.2 m long cut to length bend to the required shape and 02 Nos mounting flat iron clamps size 40mmx6mm, 04 Nos hexagonal blots 10mm dia 100mm long with nuts and washers etc., complete all as specified and directed.

Supply & fixing 1100 volts grade heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed size 4 sqmm 2 core for street light jumper, complete all as specified and directed.

Supply, Installation, testing and commissioning of water heater storage type, 25 Ltrs capacity, electric suitable for single phase, 50Hz, AC supply, 5 star rating, including minimum 1 mtr of three core 2.5 sqmm twisted copper conductor cable PVC sheathed, including three pin plug top suitable at site, complete all as specified and directed.

Material & Labour for Submain wiring with two run of single core 4 Sqmm multi stranded ISI marked PVC insulated copper conductor cable (FRLS) drawn through concealed in surface in PVC rigid conduits and the conduits accessories not less than 25 mm including one run of earth continuity conductor with 4 sqmm multi stranded copper conductor cable all as specified and directed. Note :- Two run of single core cable, one run of earth continuity conductor and one metre of conduit shall be measured as one unit.

Supply & fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' series, complete all as specified and directed

Supply & fixing MCB in DB's of the 20 Amps, curve 'B' breaking capacity 10 KA in the Existing MCB DBs, complete all as specified and directed.

Material & Labour for 15 mm bore galvanized iron pipe, medium grade, ISI marked complete with all fittings and fixed complete to walls, and ceiling or laid in floors, jointed tested and commissioned, complete all as specified and directed.

Supply & fixing stop valve brass CP high pressure both ends screwed for iron pipe of size 15 mm dia, complete all as specified and directed.

Supply & fixing PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed.

Supply & fixing cast copper alloy chromium plated fancy type bib tap for hot water supply screwed for iron pipe 15 mm bore dia, complete all as specified and directed.

Material & Labour air termination, single pointed aluminium rod 12 mm dia and 300 mm long fixed on roof including all fittings, fixtures, PCC 1:2:4 type B-1 block of size 100 x 100 x 100 mm etc, complete all as specified and directed.

Supply & fixing Aluminium strip 25 x 3.15 mm fixed with Epoxy heavy duty type insulator and GI saddles and fixing screw etc, for roof conductors and down conductors above ground, complete all as specified and directed.

Supply & fixing galvanised iron strip 32 x 6 mm as earth continuity conductor, beyond earth test point or as ring conductor, fixed to wall on heavy duty epoxy type insulator with GI saddles or buried in ground or drawn in pipe or any other situation, complete all as specified and directed.

Supply and fixing GI tubing light grade 50 mm bore with all fittings and fixing accessories with clips, wall hooks wooden plug or laid in trenches for protection of earth continuity strip etc, complete all as specified and directed.

Supply & fixing test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 75 mm, drilled and screwed including 4 Nos, 8 mm dia 25 mm long hexagonal head brass screws including box of size 90 x 90 x 90 mm made of 1.6 mm thick plain steel sheet painted with two coats of synthetic paint over a coat of red oxide primer and screwed to wall for protection of test point, complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode of size 60cm X 60 cm X 6 mm buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5 m below the normal ground level connected to GI earth strip 32 X 6 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, protected by GI pipe light grade 40mm bore all as shown on electrical plate No 5 of SSR Part-I connected to earth test point electrode, PCC pit with RCC cover, funnel with wire mesh, watering pipe 20mm dia protection pipe etc and testing on completion complete all as specified and directed. Note No 1 :- The unit rate shall also include for earth work in hard/dense soil, PCC (1:3:6) type C1 chamber including necessary plastering work and white wash, RCC 1:2:4 type B-1 cover 50 mm thick reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe light grade 40 mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (Notes) under sub-heading earthing, specified on Serial Page No 389 of SSR Part-I. Note No 2 :- Earthing strip and GI protection pipe beyond 7.5 m will be measured and paid separately if required.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 270.00 /- ]

d k suppliar