Renovation of toilets in different buildings inside factory at HAL Korwa.

Hindustan Aeronautics Limited

(Avionics Division, Korwa)

DEPARTMENT OF CIVIL ENGINEERING

CHECK LIST FOR SUBMITTING E-TENDER

NAME OF WORK:- Renovation of toilets in different buildings inside factory at HAL Korwa.

NIT No.- HAL/KWD/Civil/03 of 26-27 Date: 11.05.2026

Name of Contractor:

S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below

1 ANNUAL TURN OVER: -Average Annual Turnover during the last 3 years, ending 31st March-2025 of previous financial year, should be at least 30% of the approximate estimated amount put to tender. The Bidder should upload profit & loss statement for the last three years duly certified by Chartered accountant with UDIN. (Supported with Income Tax return, Balance Sheet etc.).

2 EMD (As per NIT)

3 SOLVENCY CERTIFICATE- Solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.

4 EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.

5 Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR

i) Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR

ii) One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.

6 Registration certificate with Government department and Government undertaking, if any.

7 Proof of GST registration

8 Copy of PAN/ GIR No. Registration Certificate issued by Income Tax Authority.

9 Constitution and legal status.( Partnership/ Proprietary)

10 Details of Bank name , brance code, address, IFS code and Account number on letter head.Please attach scanned copy of blank cheque for reference.

11 The rate quoted shall be inclusive of all taxes. Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated.

12 Tenderers are required to attach Format of undertaking as per Annexure I & J

13 Signature done, wherever required.

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

Time Required for

(a) Conclusion of contract- 03month

(b) Completion of works- 12 Months

Sl. No. Particulars Amount In Rs. Reference

1 Term contract for civil maintenance works in township for repair & maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc and allied civil works required for completion of work.

a Civil Works #REF! [Annexure- D-1]

2 Add 5% towards contigencies #REF!

Grand Total #REF!

Say ` 14.07 Lakhs

Sr. Manager (Works ) ATA

(Satyendra K Maurya) (SK Chaudhury)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

1 SCHEDULE - "A" (PART-A) #REF!

2 SCHEDULE - "A" (PART-B) #REF!

Contingency @ 5% #REF!

Grand total #REF!

SAY : 14.07 Lakhs

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Name of Work:- Renovation of toilets in different buildings inside factory at HAL Korwa.

NIT No.- HAL/KWD/Civil/03 of 26-27

Note:- Tenderers are requested to quote their offer in percentage either above or below on CPWD DSR-2023 Volume I & II (Rates). All relevant items shall be executed as per CPWD specifications and CPWD DSR 2023, materials specifications shall be as mentioned in the Bill of quantities and as per the List of approved make/brand as provided in tender document and as per the direction of Engineer-in-charge.

NAME OF AGENCY (To be filled in highlighted box ) :

Sl. No. Description of item Qty. Unit Rate derived excluding GST @18% Amount excluding GST @18% in (Rs.)

1 Dismantling of floor/ wall tiles fixed in cement mortar and removal of debris at directed place at a lead of Approx 500m , cleaning/ washing the surface, T&P etc all complete as per specification & direction of EIC. 1199.00 Sqm 62.25 74637.75

2 Providing & laying Vitrified ceramic tiles matt finish of first quality of size 600 x 600 mm on floor of approved shade & brand like Kajaria/ Johnson/ Somany or as approved, grouting of tiles with neat cement slurry @ 3.30 kg/Sqm and joints finished with matching colour pigment and epoxy solution including cleaning of existing surface with acid after roughening of surface/hacking of surface with suitable tools also providing bedding layer 20 mm (Av. thickness) in c.m. 1:4 (1cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 226.00 Sqm 1242.41 280784.66

3 Providing & laying glazed ceramic tiles of size 300x450/ 300x600 mm or larger size with 1st quality of Kajaria/Somany or equivalent approved make including provision of pencil tiles / decorative bands / border in wall tiles , skirting and dado in bedding layer 15mm av. Thickness in CM 1:3 (1cement, 3coarse sand) jointing with grey cement slurry @ 3.3kg per sqm, and grouting the joints with epoxy grout with matching shade and sealed finally with transparent epoxy coating, to avoid dirt on joints, including the cost of material, labour, T&P, curing, scaffolding all complete as per specification and direction of E.I.C. 973.00 Sqm 1075.41 1046373.93

4 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. 20.00 Nos 113.74 2274.80

5 Removing and refixing of existing panelled/ flush/ guaged/ PVC door shutters carefully from the wooden / MS frames including cutting of door shutters after laying of tiles, painting, replacement of hinges with screws, etc. as required, including all labour, material, T&P, screws etc all complete as per specification & direction of EIC. 60.00 Nos 363.94 21836.40

6 Providing & applying approx. 1 mm thick wall care putty of make Birla, Berger, J.K. or approved make with a coat of wall primer of approved brand to give a smooth & even finish at all floors on walls / ceilings or any description of works including preparation of surface smooth & even, filling holes / minor pits all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C 700.00 Sqm 132.35 92645.00

7 Providing and applying two coats of acrylic distemper (ready mixed) having VOC content less than 50 gram/litre of approved brand and shade such as Asian/Berger etc. on wall / ceiling surface including preparation, removing of nails, filling holes / minor pits , cracks with Birala putty wherever required etc., spreading & removing covering to doors, windows, floors, fittings etc. to protect them from splashes, removing & replacing furniture, movable cupboards, etc., washing floors, cleaning glass, joinery etc. of drops and splashes & leaving premises clean and tidy with all labour, material, wastage, scaffolding with all protective measures, T&P, cartage etc all complete as per specification and direction of EIC. 700.00 Sqm 53.18 37226.00

8 Providing & applying two coats of super synthetic enamel painting on wood / steel / wall surface over a coat of wood/ steel/ wall primer for any description of works of approved shade, make Asian / Berger / ICI of fisrt quality including preparation of surface with Putty filling in cracks, holes etc wherever required, at any height / depth or any descripiton of works at all floors including all labour, material, T&P ,scaffolding all complete as per specification and direction of E.I.C. 230.00 Sqm 87.19 20053.70

9 Providing and fixing ISI marked flush door shutters 30 mm thick decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters fixed to door frame (MS/ Wooden) of Century/ Green ply/ Kit ply or other approved make, ISI mark as approved all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including 4 nos for each leaf Stainless Steel butt hinges with necessary screws labour, material, T&P, cartage, wastage etc all complete as per specification and direction of EIC. 15.00 Sqm 2686.90 40303.50

10 Providing , fabricating and fixing M.S. frames for doors, windows and ventilators, MS grill, grating, railing made out from MS square sections, M.S. angles and M.S. flats as per design, electrically welded and fixed in chowkhats with screws or treads of steps and R.C.C. balcony slabs in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 hard stone aggregate 12.5 mm nominal size) including MS hinges for door, labour, material & T&P grinding etc. all complete, as per drawing, specification and direction of EIC. 60.00 Kg 110.68 6640.80

11 Providing & fixing power coating Aluminium anodized sliding window partially fixed and partially sliding of anodized Aluminium section in window shutter, tripple track Al. window with following specification for each window:- i) Outer Al. frame 100x44x2mm section, ii) Three track Al. channel 100x25mmx1.5mm approx, iii) Window Shutter of 12x25 mm appx. Size, for one leaf reflective glass sliding shutter other outer leaf mosquito SS mesh sliding shutter using bearing,handle, intermediate locking sections/channels with T-rubber beading and U-rubber gasket, screw aluminium angle section for fixure etc. clutch type handle (heavy duty) in each shutters, 4.8 mm thick Reflective glass in different colour of make Saint gobain / Modiguard/Triveni / TATA or as approved by EIC, including Stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed on Alluminium framed shutter tolerance as per manufacturer / IS specifications and member will be fitted as per drawing c/c horizontally and vertically both ways complete in all respects including material, labour, T&P, wastage and other required fixtures etc. for proper completion as per specification and direction of EIC. 15.00 Sqm 6862.00 102930.00

12 Dismantling/ removing of Wooden/ MS Window frame with shutters (without taking off shutters from the frame) with grill if any at any height including dismantling of brick work/concrete as required and making good, removing the window frame to Civil factory store or as directed by EIC, labour, T&P , cutting,welding, scaffolding etc. all complete as per specification & direction of EIC. 15.00 Nos 311.44 4671.60

13 Providing and fixing CPVC (Chlorinated Polyvinyl Chloride) concealed pipe 20mm having thermal stability for hot & cold water supply, including fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand ISI marked as approved by EIC, cost of cutting, chases and making good the same, testing of joints , labours, materials , wastages etc., all complete as per direction of Engineer in Charge. as directed by EIC. 200.00 MTR 455.97 91194.00

14 Providing and fixing CPVC (Chlorinated Polyvinyl Chloride) concealed pipe 25mm having thermal stability for hot & cold water supply, including fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand ISI marked as approved by EIC, cost of cutting, chases and making good the same, testing of joints , labours, materials , wastages etc., all complete as per direction of Engineer in Charge. as directed by EIC. 50.00 MTR 532.00 26600.00

15 Providing & fixing vitreous china white wash basin flat back 550x 400 mm size of approved make such as Hindware, Cera, Nycer, Parryware including 15 mm C.P. brass pillar tap (L&K, Prayag, Hindware, Parryware, Plumber or as approved by EIC) with 450mm long PVC Connection of Prayag make or equivalent approved make CP waste coupling 32mm dia of L& K, Plumber make, MS / CI bracket for fixing of wash basin painted with white paint all complete including cutting and making goods, fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates) and finishing with cement mortar 1:3, the walls and floor with all labour, material, T&P, wastage, cartage etc all complete as per specification and direction of EIC. 38.00 Nos 1593.85 60566.30

16 Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make such as L&K, Plumber, Parryware etc or other approved brand including labour, material, catage, T&P, soota, safeda etc. all complete as per the direction of Engineer-in-charge. 38.00 Nos 877.67 33351.46

17 Providing & fixing white glazed Vitreous china orrissa pan of size 580 x 440 mm with integral type foot rests of make Hindware, Cera, Nycer, Perryware or as approved make including 10 litre capacity PVC low level flushing cistern with PVC flush bend pipe and suitable joint for closet inlet, setting in plain cement concrete 1:2:4(1 cement : 2 coarse sand: 4 ,20 mm graded stone aggregate), around the pan as to get the specified thickness of floor complete in all respect inluding 100mm CI P-trap with extension pipe as required, cutting chases walls and floors and finishing the same in cement mortar 1:3 (1 Cement : 3 coarse sand) etc.all complete as required and as per specification and direction of EIC. 20.00 Nos 5739.78 114795.60

18 Providing and fixing of white glazed Vitreous china European type W.C. pan with white solid plastic seat cover and lid including 10 litre capacity PVC low level flushing cistern with PVC flush bend pipe and suitable joint for closet inlet of make Hindware, Cera, Nycer, Perryware or as approved make in all respect including flush pipe, labour, material, cartage T&P etc. all complete as required and as per specification and direction of EIC. 8.00 Nos 5526.17 44209.36

19 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including labour, material, cartage T&P etc. all complete as required and also removal of old basin and fittings as per specification and direction of EIC. 0.00 0.00

(a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern 5.00 Nos 5308.37 26541.85

(b) Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 20.00 Nos 8152.77 163055.40

20 Providing and fixing 600 x 450 mm x 5.00 mm bevelled edge mirror with the holes on all the four corners of the glass of Modiguard/ Saint Gobain/ Atul or as approved by EIC, complete fixed with SS spacers or 6 mm thick asbestos sheet/ commercial hard board as required, fixed to wooden / PVC cleats with C.P. brass screws and washers all complete with labour, material, T&P, cartage etc and as per specification and direction of EIC. 34.00 Nos 1363.78 46368.52

21 Providing and fixing Chromium plated Grating Jali 100 / 125 mm dia with waste hole of appoved make all complete with labour, material, T&P etc all complete as per specification and direction of EIC. 60.00 Nos 63.00 3780.00

22 Providing & fixing CP long body bib cock 15 mm dia of L&K / Hindware / Parryware / Plumber/ Prayag or as approved by EIC including labour, material, T&P, soota, safeda etc including removal of existing bathroom fittings if requred all complete as per specification & direction of E.I.C. 30.00 Nos 677.63 20328.90

23 Providing & fixing CP angle valve 15 mm dia of L&K / Hindware / Parryware / Plumber/ Prayag or as approved by EIC including labour, material, T&P, soota, safeda etc including removal of existing bathroom fittings if requred all complete as per specification & direction of E.I.C. 60.00 Nos 487.09 29225.40

24 Providing and fixing CP Health Faucet of L&K / Hindware / Parryware / Plumber/ Prayag or as approved by EIC all complete with labour, material, T&P etc and as per specification and direction of EIC. 8.00 Nos 979.00 7832.00

25 Providing and fixing CP two way bib cock 15 mm dia of L&K / Hindware / Parryware / Plumber/ Prayag or as approved by EIC all complete with labour, material, T&P etc and as per specification and direction of EIC. 8.00 Nos 1787.00 14296.00

26 Providing & fixing 100/ 110 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 15.00 MTR 320.09 4801.35

27 Providing & fixing 100/ 110 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 6.00 Nos 127.52 765.12

28 Providing & fixing 75 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including MS clamps and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 10.00 MTR 211.02 2110.20

29 Providing & fixing 75 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 6.00 Nos 89.82 538.92

30 Providing and fixing CP brass Toilet paper holder of make - L&K/ Plumber/ prayag/ Pearl or as approved by EIC including required accessories all complete with labour, material, T&P, wastage etc as per specification and direction of EIC. 12.00 Nos 681.66 8179.92

31 Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock 15 mm nominal bore, having foam flow technology all complete with labour, material, T&P, wastage etc as per specification and direction of EIC. 6.00 Nos 7466.87 44801.22

32 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. 6.00 Nos 6767.57 40605.42

33 Providing and fixing frosted glass Urinal partition of standard size 450X750X12mm of approved quality of modiguard fixed to wall with 3 No. heavy duty SS L-connector to hold the glass partition all complete with labour, material, T&P, wastage etc as per specification and direction of EIC. 12.00 Nos 3445.00 41340.00

34 Providing & fixing vitreous china white Cascade Table Top wash basin of size 470x 405x150 mm of approved make of Parryware including 15 mm C.P. claret pillar cock of Parryware with 450mm long PVC Connection of Prayag make, CP waste coupling 32mm dia of parryware make, CP bottle trap with coupler 32mmx25mm, CP angle valve of Parryware, etc all complete including removing of existing wash basin carefully of any size and deposite to civil factory maintenance store , cutting and making holes in granite platform all complete with all labour, material, T&P, wastage cartage etc all complete as per specification and direction of EIC. 6.00 Nos 7481.00 44886.00

35 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone slab of colour black, Cherry/Ruby red and Area of slab upto 0.50 sqm. for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels - including all labour, material, wastage, cartage, T&P etc all complete as per specification and direction of EIC. 3.50 Sqm 4591.47 16070.15

36 Providing and fixing 32 mm dia PVC pipe of approved brand such as lisan, supreme etc for drainage from washbasin to the floor/ nahani trap etc with all labour, material, adhesive, T&P, wastage, cartage all complete as per specification and direction of EIC. 35.00 RM 146.00 5110.00

37 Providing and fixing 32 mm dia PVC elbow of approved brand such as lisan, supreme etc for drainage from washbasin to the floor/ nahani trap etc with all labour, material, adhesive, T&P, wastage, cartage all complete as per specification and direction of EIC. 25.00 Nos 46.00 1150.00

Total (Part A + Part B) 2622881.23

Contractor shall quote only numerical value of percentage either Above or Below in highlighted Cell on Total Above % 0.00

Sub Total 2622881.23

Add GST @18% on sub total 472118.62

Total Quoted value including GST @18% 3095000.00

Annexure-D (Para 4.6.4)

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2023-24. (For One years)

Time Required for

(a) Conclusion of Contract - 03 months

(b) Completion of works- 12 months

Sl. No. Particulars Amount in Rs. Reference

1 Term contract for civil maintennace works in Township for repair and maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc. and allied civil works required for completion of work.

(a) Civil Works (Paer: A+Part: B) #REF! [Annexure-D-1]

Grand Total #REF!

Say Rs. #REF! Lakhs

Manager (Works) ATA

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 166.94 3.3388 167 3.34 150 3.00 208.675 125.205 4.1735

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 176.69 14.1352 198 15.84 190 15.20 220.8625 132.5175 17.669

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 166.94 1.6694 181 1.81 160 1.60 208.675 125.205 2.08675

Rebate offered (in %age) if any 2.00

Status of Parties L-2 L-1 9.380172329

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

SCHEDULE - 'A' Part 'B'

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil/21 of 2013-14

PART 'B' NON MES ITEMS

S.N Description of Items Qty. Unit As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (2/2) Freak Rate

Rate in figure ( Rs.) Rate in words ( Rs.) Amount in ( Rs.) Rate (In Rs.) Amount Rate (In Rs.) Amount

1 Supply and stacking of coarse sand such as Banda/ Chopan including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 65.00 Cum 1970.00 #NAME? 128050.00 2600.00 169000.00 2300.00 149500.00 - 2462.50 1477.50 56.62514156 70.76139258 65.34090909

2 Supply and stacking of Ist class bricks class 'A' at directed place inside Factory or Township area including all labour, material, transportation, loading, unloading, wastage , T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 2000.00 Nos 8.00 #NAME? 16000.00 7.50 15000.00 7.00 14000.00 - 10.00 6.00

3 Supply and stacking of 12.5 mm graded stone aggregate of bharatkoop/ Dala quarry including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 10.00 Cum 2408.00 #NAME? 24080.00 2400.00 24000.00 2500.00 25000.00 - 3010.00 1806.00

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 154 3.08 167 3.34 165 3.30 192.5 115.5 3.85

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 163 13.04 198 15.84 200 16.00 203.75 122.25 16.3

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 154 1.54 181 1.81 180 0.00 192.5 115.5 1.925

Rebate offered (in %age) if any 2.00

Total Amount (Part-B) 168130.00 208000.00 188500.00

Total Amount (Part A+Part B) 0.00 1268130.00 1557858.16 1373606.38

Status of Parties L-2 L-1

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya