REPAIR REPLACEMENT TO JOINERY TILING PLASTERING WALL PANELLING FALSE CEILING INTERNAL EXTERNAL PERIODICAL AND OTHER MISC BR WORKS IN OTM ACCN OF 5 SIKH LI UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided.

M&L reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete (reinforcement to be measured separately).

M&L TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

M&L 15mm thick Rendering in cement mortar 1:4 on faces of brick work or concrete external surfaces of wall finished even and smooth without using extra cement all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished with and including using liquid water proofing compound @ 200ml/50kg of cement bag, even and smooth without using extra cement all inculding dismantling of old false ceiling of any type, complete all as specified and as directed.

M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth including dismantling of old wall paneling of any type, complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 2mm thick wall care putty on plastered surfaces preparatory to distempering complete all as specified and directed.

M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats of oil bound distemper over one coat of 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed.

M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface complete all as specified and directed

M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for preparation of old steel surfaces with complete removal of existing treatment and appliyng two coats of synthetic enamel paint coloured as approved by EIC over a coat of red oxide over a coat of red oxide complete all as specified and directed.

S&F in repairs for gypsum ceiling board for ceiling prepainted, perforated finish, 600mm x 600mm x 9mm to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32mm x 24mm for main, 25mm x 24mm for cross tee and 20mm x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed.

S&F prelaminated fire resistance PVC rigid foam sheet wall panelling of 5mm thick stck on inner frame of work of 35mm wide strip of 5mmm thick rigid foam sheet . The strip should have a groove of 6mm width and 2mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300mm c/c. The PVC strips to be fixed to the all using 65mm long MS screw through the groove in the strip using PVC fasters including necessary moulding work on doors, windows, pillars and opening etc.complete all as specified and directed. Note :- (a) Work for fixing of wall panelling shall be got executed through manufacturer;s authorised appllicators only under the close supervision of their techanical staff. (b) The entire quantity of wall panelling and their ancillaries shall be procured directly from the manufacturer or their authorised dealer only.

Providing & fixing false ceiling at all heights with fully perforated 12mm thick thick micro tegular edged or 10mm thick square edged GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of Size 595 x 595mm of approved texture, having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85 x 25 x 2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall "wood screws including dismantling of old false ceiling of any type". The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down door shutter of any description exc 1 sqm & n.exc 2 sqm each complete all as specified and directed.

M&L for factory made, 2nd class hard wood 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S&F 40mm thick flush shutter (Factory made) soild core construction, with black board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F fibre glassreinforced plastic (FRP) door frame, three legged of cross section 90 x 45mm having single rebated of 32 x 15mm to receive shutter of 30mm thickness.The laminate shall be moulded with ffire resistant grade un-saturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall befiled with suitable wooden block in all over frame. The frame shall be covered with fibre glass from all sides including MS stay shall be provided at the bottom to steady the frame complete all as specified and directed.

S&F factory made solid FRP door shutter, 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retavdant grade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminated for panels and confirming to IS-14856-2000, including fixig to frames complete all as specified.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of GE. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of GE. Note: Stainless steel butt hinges and necessary Stainless steel screws shall be measured and paid separately.

S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.

S&F in repairs 100mm size butt hinges, extruded aluminum alloy with galvanised mild steel ISI marked complete all as specified and directed.

S&F mild steel pressed steel handle, oval type, stove enamelled black 150mm long complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs stainless steel, wire cloth 0.56mm nominal dia of wire, and average width of aperature 1.18mm and fixed to steel or wooden window or doors with necessary fixing arrangement complete all as specified.

S&F in repairs sheet glass ordinary quality, 4mm thick and glazing with aluminium glazing clip, rubber gasket etc in aluminium window any type in square complete all as specified and directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and directed.

Refixing only old 15mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as required including taking up or down steel tubing and connections complete all as specified and directed. .

S&F steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and directed.

Refixing only old 20mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as required including taking up or down steel tubing and connections complete all as specified and directed.

S&F in repairs WPC Jaali 18mm thick of any design and colour as directed by Engineer-in-charge complete all as specified and directed.

S&F in repairs frame work of WPC size of frame 75mm x 50mm all as per direction of GE.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repairs bib tap 15mm bore fancy type chromium plated complete all as specified and directed

S&F in repairs CP Jet for 15mm dia with pipe chromium plated 1.25 Mtr long flexible tube and complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes of capacity exceeding 250 ltrs and not exceeding 500 ltrs including by flushing out water, scrubbing with brushes cleaning with concentrated hydro chloric acid or caustic soda etc complete & finally washing with fresh water, including writing or proper date of cleaning with white paint in 50mm of size of font with stencil over a coat of black paint complete all as specifed and directed by Engr-in-Charge.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adehessive on complete exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 2mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25mm thick (average thickness) using cement mortar 1:3 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by wight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper Geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs,chajjas,fins,facias ,parapets ,columns and beams etc complete including necessary scaffolding ,shuttering necessary chased to brick work or RCC members at any height upto four storey buildings including removing of small trees shrubs etc all as specified Note:- Steel welded mesh to be welded with the existing reinforcement. The cost of welded mesh is to be welded with the existing re-inforcement is deemed to be included in the quoted rate.

Providing and fixing 4mm thick aluminium composite panel (ACP) exterior grade (0.5mm PVDF coated aluminium skin on top & bottom plus 3mm thick polyethylene core) on/all-round RCC/Brick column/ wall/ Fascia's/ M.S. section/ Aluminium section structure/ dead walls/under side sky light upto all height in required colour/pattern & panel size as (Area of panel shall not more than 0.60Sqm as per drawing fixed on aluminium extruded standard tubular section of size 38 x 25 x 1.6mm of approved make (Jindal/ Hindalco/ Indalco) conforming to IS;733 and IS; 1285, fixed at 600m center to center with rawl plugs and screws or with fixing clips or with expansion hold fasteners Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle CP brass/stainless steel screws, with 12mm (wide) x 20mm (deep) groove in joints or panels including filling the joints with weather silicon sealant of Dow coming 789 or equivalent of approved colour inacp ACP, weather sealant structural sealant/adhesive tape, masking tap, primer/ gasket/ foam/ scaffolding/ cluding 10mm dia backer rod, The rate shall include cost of ACP Panel, subframe of aluminium section for fixing of ACP, weather sealant structural sealant/adhesive tape, masking tape primer/ gasket/ foam/ scaffolding/ aluminium cleats with screws complete including making openings as required at site like electical fittings, recess for pipe etc, all necessary tools and plants, scaffolding and as per manufacturer's technical specifications, including dismantling of old sheet complete and as per the direction of the Engr-in-Charge (Surface area of aluminium composite panel shall be measured for payment.

Dismantling of stone slabs and tiles of any description or thickness in floors/wall, aprons etc., laid bedded and pointed in any mortar complete all as speicified.

M&L for 75mm thick 1:4:8 type-D-2 using 40mm graded crushed stone aggregate as in sub base to receive stone slab and pavement all as specified and directed.

M&L 20 to 25mm thick machine cut Kota stone slab mirror polishing / diamond polishing by machnical means and using carborandum stone of 0 unit to achive mirror finished surface as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L 20 to 25mm thick machine cut Kota stone slab polishing/diamond polishing by machnical means and using carborandum stone of 0 unit to achive mirror finished surface as in riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L granite 18-20mm thick colour as approved (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or making oval shape hole for fixing of wash hand basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 including moulding and polishing the edges complete all as specified and directed

M&L granite 18-20mm thick colour as approved (of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 12mm thick in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding and polishing the edges etc complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified.

M&L vitrified ceramic tiles 10mm thick square/rectangular dark shade) granite or marble texture polished, area of each tiles not exceeding 0.36 sqm as in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile complete all as specified and directed.

All as per the description of srl item No 59 but in vertical surface as skirting, dado and risers to steps over and including10mm thick rendering/backing coat in cement mortar 1:4 etc.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over and including 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. all as specified and directed

M&L glazed ceramic coloured tiles in vertical surface 450mm x 350mm x 7mm or 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in CM (1:4) and finished rough, complete all as specified & directed.

S&F 10mm thick plain or frosted toughned glass for door shutters, making partitions etc. of size area exc 1.50 Sqm but n.exc 3.00 Sqm including necessary arrangement required for fixing it in position complete as specified and directed.

DEEP ASSOCIATES (BID ID -3321044)

Keshav Brothers (BID ID -3316635)

Paradise Interior (BID ID -3318121)

QUALITY CONSTRUCTIONS CO (BID ID -3329504)

V M CONSTRUCTION (BID ID -3320676)

M/S SURINDERAS CONSTRUCTION CO. (BID ID -3320561)

Rohan Construction Company (BID ID -3321386)

PATLIPUTRA INFRASTRUCTURE (BID ID -3314601)