REPAIR TO DRAINS, FENCING AND PATHWAY UNRESTRICTED AREA UNDER AGE B/R-II UNDER GE PANAGARH

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in CM 1:6 etc complete all as specified and directed.

M & L for brickwork with old size subclass 'B' bricks, except bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drain omplete all as specified and directed.

M & L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping ,plinth course including necessary formwork complete all as specified and directed.

M & L for extra for forming fair finish drain or channel 31.40cm inner grith in cement concrete using extra cement including forms, moulds, mitred/ stopped end etc complete all as specified and directed.

M & L for providing pre-cast cement concrete 1:2:4 type B-1(20 mm graded stone aggregate) for cover slab, manholes etc set in CM 1:4 complete all as specified and directed.

Dismantling structural steel work or & including door, gates any description complete all as specified and directed.

S&F mild steel framed workes in door gate of angle or other section gusset plate rail brackets etc complete drilled for fixing steel sheeting or other convering section of Fe 410-0 or 310-o. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and also fastening complete all as specified and directed.

S&F mild steel pintel hinges large hasp and staple holdfast etc complete all as specified and directed.

M&L for rendering 15 mm thick in (1:4) on fair faces of brick or concrete surfaces work finished even and smooth without using extra cement.complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

Dismantling post or strut (wood, steel or RCC) including taking out embeded portion in concrete, and making good disturbed ground complete all as specified and directed.

All as per Item No 14.00 mentioned here-in-above but embeded in natural ground.

Excavation in post hole each not exc 0.5 cum getting out returning, filling and ramming earth or broken rubble mixed into earth around in layers n exc 25 cm watering and removing surplus soil to a distance n. exc 50 m and making surfaces good in soft/loose soil complete all as specified and directed.

M&L RCC (1:2:4) type B1(using 20 mm graded aggreagte) precast fencing post or sturt average sectional area exceeding 100 but not exc 250 sq cm with or without chamfered angle complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

All as per item No 18.00 mentioned here-in-before but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F in repair galvanised two strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any standardral straining bolt including securing or tying at rossing with an provision of galvanised stell pin etc complete all as specified and directed.

Dismantling fencing wire mesh any type including line wire complete all as apecified and directed.

Supply only MS galvanised chain link fencing of size 4mm dia and 75x75mm apparture complete as all specified and directed. Note: Weight of chain link fencing shall be asertain through Board of Officers.

Fixing only chain link fencing ,including welding or nuts & bolts of any size of mesh complete all as specified and directed.

S & F mild steel angle and flat iron section fixed independently with out connecting plate of Fe-410-W(Gde-E-250) quality -B complete all as specified and directed.

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n exc 10 cm long complete all as specified and directed.

All as per Item No 25.00 mentioned here-in-above but length of bolt exc 10 cm and n. exc 15 cm long complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface not exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

M&L for old surface of steel surface scraping/rubbing and applying two coat of synthtic enamal paint of any description over 10cm in width or grith, over one coat of red oxide complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in sub base in floor/paving/hardstanding ,complete all as specified and directed.

M&L for hardcore broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Material and labour for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry @0.3kg/Sqm over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete as per manufacturer instructions and direction.Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M & L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade with grey cement and pigment complete all as specified and directed.Note: Design, shade and pattern of fixing of paver block shall be as directed and approved by GE

M/S Dey Construction

SAIBABA ENTERPRISE

M/s RAJEN ROY

S. D. Construction Co.

HIGH HILLS INFRA