S/R to SDPO Office cum res Sadar at Adaspur for the year 2025-26

Providing and filling in foundation and plinth with sand including watering & ramming with cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and cost of labour, T&P, etc. required for the work complete as per specification & direction of the Engineer-in-charge.

Providing and laying of cement concrete of prop. (1:3:6) using 4cm size black hard granite crusher broken stone aggregate including watering, curing and ramming with cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

Construction of Unreinforced cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork, laying and fixing of 125 micron thick polythene film, wedges including levelling the formwork as per drawing, spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, primer, sealant, admixtures as approved, curing of concrete slabs for 14-days with curing compound and water, finishing to lines and grade as per drawing and Technical Specification Clause 1501 of MORD and asper direction of Engineer-in charge.

Supplying , fitting , fixing up window (sliding type ) made up aluminium Section 151-154-151-155, as windows frame section No.151-155.151-153 and 151-167 as shutter frame with 5 mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all labour, T& P etc. complete as per direction of Engineer in charge.

Providing fitting , fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12 mm thick pre-laminated board fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labor T& P hire charges of drilling machine , labour charges etc. complete.

Finishing walls with two coats of weather coat paint approved shade to outside surface with cost, conveyance, of all materials, labour charges, T&P etc.required for the work complete as per specification and direction of the Engineer-in-charge.

Earthwork in embankment with approved material obtained from borrow pits with all lifts & leads, transporting to site by mechanical means, spreading, grading to required slope and compacting to meet requirement of Tables 300.2 & clause 305 of MoRT&H specification for Road & Bridge works as per direction of the Engineer-in-Charge.