Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-Finance | L1 | Accepted-Finance L1 Bidder | |
| 2 | L2₹40.7 L+₹4.8 L (13.4%)Accepted-Finance | L2 | Accepted-Finance L2 Bidder | |
| 3 | L3₹40.7 L+₹4.8 L (13.4%)Accepted-Finance 12 BATAPORA SRINAGAR NEAR GOUSIA CEMENT TILES BATAPORA SRINAGAR JAMMU KASHMIR 190006 UDYAM JK 21 0019369 | SRINAGAR | JAMMU AND KASHMIR | 190006 | L3 | Accepted-Finance L3 Bidder |
Tender Value
₹45.5 L
EMD Value
₹91,100
Closing Date
24 Nov 2020, 4:00 pmClosed
Executive Engineer
Soura Srinagar
BALANCE WORK, LANDSCAPING AND LAWN DEVELOPMENT INSIDE PLANT PREMISES AT 10MGD WATER TREATMENT PLANT RANGIL UNDER LANGUISHING PROGRAMME.
2020_PHE_109331_1
eNIT.31/WSMP of 11/2020 dated 16/11/2020
Open Tender
Civil Works
Item Rate
30 days
10 MGD WTP Rangil
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
Ex.Engineer WSMP Div
₹91,100
Yes
11 Dec 2020
17 Nov 2020
25 Nov 2020
17 Nov 2020
24 Nov 2020
17 Nov 2020
Amount
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. i. All kinds of soil :
Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.
Providing and laying dry stone soling in foundation trenches hand packed and consolidated by hand ramming (Quarry) including all carriages upto site of work.
Centering and shuttering including strutting, propping etc. and removal of form work for: i. Foundations, footings, bases for columns
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level . i. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level i. Thermo-Mechanically Treated bars of grade Fe-500D or more.
15mm Cement plaster on the rough side of single or half brick wall of mix: i. 1 : 6 ( 1 cement : 6 fine sand)
Providing and fixing of 6mm thick teak on different structures. The job includes cost of labours, nails, solution taxes etc complete job.
Providing and fixing of locks to Wardrobes of goodrej make complete job.
i. Big lock
ii. Small lock
iii. Handles SS
Providing and fixing of MS Cover for RCC Chamber made of 40x40x5mm angle iron with 6mm thick MS Sheet. This item also includes all types of carriages, with two coats of anti-corrosive redoxide and welding charges etc. complete job.
Providing and fixing of 50mm PPR Pipe. The job includes all sorts of carriage and pipe specials if required except 50mm dia Gate Valve.
i. 50mm dia Gate Valve.
Providing and fixing of 50W LED light bracket type make (Havels / Syska / Philips). The job includes all sorts of fittings i.e. MCCB, on/off switch, wire, cables 2/3 Phase etc. complete job.
Providing and fixing of new PVC rectangle channels after removing the old electric conduit channels and refix the old wiring into new channels. The job includes replacement of the damaged wire with new ones. Complete job.
Replacement of slip rings, bushes, M-Oil or any damaged part etc. to the existing floculator bridges. The job includes all sorts of carriage taxes complete job.
Providing of lawn mover Falcon make (14” blade width) including loading, unloading and all types of carriages upto site of work complete including testing at site.
Manufacturing / Providing / Fixing Installation of any number of retro reflective signage system / boards (as directed by Engineer-in-charge) of 2mm thick Aluminum Alloy (highly stressed sheeting plates) of different sizes and specifications (as directed by Engineer-in-charge) having properties of anti corrosion weather resistant colour stability extreme durability and extreme visibility in all weather conditions in accordance with the international brand complete with computer order machine process subject matter, logos, symbols, boarders, arrows, text size) in English / Urdu (as Manufacturing / Providing / Fixing Installation of any number of retro reflective signage system / boards (as directed by Engineer-in-charge) of 2mm thick Aluminum Alloy (highly stressed sheeting plates) of different sizes and specifications (as directed by Engineer-in-charge) having properties of anti corrosion weather resistant colour stability extreme durability and extreme visibility in all weather conditions in accordance with the international brand complete with computer order machine process subject matter, logos, symbols, boarders, arrows, text size) in English / Urdu (as directed by Engineer-in-Chrage) and graphics by way of cut out / printing application in green and white colour which includes providing of fancy type metal stanchion upto 300cm long of 40mm OD with 90mm decorative dome shaped top including supporting stiffeners for strengthening of the job wherever necessary with providing of 15cm long resting toe plated fitted at bottom for embedding which also includes embedding of signage / metal stanchion at various locations of site including packing / carriages handling / rehandling / loading / unloading / lead / lifts and head necessary with tools / plants and all countable / electric energy, gases etc. as and when required for scaffolding as per requirement of site. (Rectro reflective signage’s of super engineering grade with fancy type metal starchion of structural steel frame and all installation charges complete in all respects.
Providing and fixing of high mast lighting.Supply. Commissioning, testing of PVC insulated XLPE, aluminum armored cable of ISI mark of Havels / Polycas etc. The job includes excavation of trenches back filling and termination thimbling etc. i. 35mm Sq. 3.5Core
ii. 16mm Sq. 2 Core.
Supply / installation / testing / commissioning of 12.5mm high mast shaft in two sections suitable for 50m per second wind speed with head frame, winch mounting bracket, luminaries carriages suitable to install 6 No. luminaries in symmetrical arrangement with supply / fixing of motor run raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable connector, integral power tool motor, manual handle junction box, lightening final (wiring material from JB to individual luminaries and MCB in base compartment are not included and are part of installation), erection of high mass with the help of suitable tools and plants wiring of luminaries with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5Sqmm plugs MCB and all labour with supply fixing of foundation bolts manufactured from special steel along with nuts, washers, anchors plate and common template. The item also includes construction of shallow foundations with M25 grade concrete for high mast considering the safe bearing soil capacity at site as 10Ton/Sq.Mtr. at 2 meter depth with all materials and labours (as per drawing) preferred make BAJAJ, PHILLIPS, CROMPTON, GREAVES for 12.5 Mtr high mast ( as per technical data sheet enclosed).
Supply, laying of HDPE pipes of 50mm inner dia including cost of earthwork and backfilling and making good the surface with depth of cutting not less than 300mm in depth.
Supply, fixing, testing, commissioning of LED flood light outdoor type IP 65 specification as per Cat No. BJFL 200 WLED of preferred make BAJAJ (tolerance 10% + -) HAWELS POLYCAB with maintenance of 12 months from the date of commissioning. Complete Job.
Supply/fixing of LED type single dome aviation obstruction light.
Supply/fixing/testing/commissioning of outdoor stand mounted feeder pillar fabricated out of 2mm thick CRCC sheet, dust and vermin proof, powder coated in cubical shape of size 2”×1.0×2” with 32A TPN MCB incomer, single dial time switch 25A TP conductors and raise lower push button, incoming with all sort of thimble/cable termination and glands mounted on angle iron frame work as per size required at site.
Supply/laying/ testing and commissioning of 2.5mm Sq. multi stranded copper wire of high mast lights etc. of HAWELS/POLYCAB make.
Supply/ installation/ testing/ commissioning of MCB enclosure box consisting of 06 No. 10Amp SPMCB etc. of HAWELS/ LEGRANDE make .
Providing earthling station at location as per requirements with 600×600×6 mm thick GI electrode and a mixture of salt and charcoal around plate electrode with earthling pits with pit covers complete (02 No. for each pole and 01 for feeder pillar.)
Supply, installation, testing, commissioning of Dicast Aluminum 9W bollard 600mm ht as per cat No…..(+-10per total) of preferred make Philips / Bajaj / Havels with cost of cement concrete block of Mix1:2:4 6” above ground including cost of shuttering. The item as includes 6Amo MCCB (S.P) backlit connection with all sorts of casing enclosed with a maintenance of 18months from the date of commissioning .
Supply, installation, testing commissioning separate looping box fabricated out of CRCA sheets powder coated outdoor type in cubical shape of size 1’x1’x9” with locking arrangement including 6Amp MCCB (S.P) and 40mp connector duly fixed on 40x40x6mm angle frame grounded on cement concrete block.
Providing and fixing of 25x3mm GI strip for earthing complete job
Supply / providing and laying of GI Wire from feeder piller upto pole. The item including cost of earth, backfilling complete job.
Supply, testing, commissioning and laying of PVC insulated XLPE aluminum armored cable of ISI mark of Havels / Polycab etc. The job includes excavation of trenches back filling and termination thimbling etc. Complete
i. 10mm Sqm (4 Core)
ii. 166mm Sqm (4Sqm)
Providing and fixing of flooring AC4 TYPE including kanas.
Providing and fixing of 350mm dia D.I Sluice Valve, (ISI marked) Killoskar/Vag/Talis/AVK Make P.N 1.6 pressure rating of having standard make (ISO:9001) and approved brand as per requirement of site. This item also includes removing of old sluices Valves, cutting and fixing of MS Pipes of old Sluice Valve, fixing of new flanges, nut bolts RI as per required. The job includes all types of charges taxes levies and labours complete job.
Providing and fixing of wooden doors 35mm thick of KD wood. This item also includes polishing and carriages as directed by Engineer-Incharge.
Providing and fixing of glazing in aluminum work for doors, windows, ventilator and partition etc. with EPDM / neoprene gaskets etc. complete as per the architectural drawings and the directions of Engineers Incharge, with glass panes of 4.0mm thick complete including all carriages.
Providing hoisting and fixing truss / purlins/ rafters / post-plates or like components including cost of nails / screws, sprit polish etc. complete job.
i. Deadar Wood
ii. 50mm thin planks including sprit polishing as directed by the Engineer Incharge
Providing and fixing of deodar wood shingles on planks. The job including cost of nails / screws, sprit polish labours etc. including electric fitting and lightning on/off switch. (Job will be measured in finished form). Complete job
Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. i. Changez Khani
Providing and fixing plained Eves boarding. (Ist class Budloo wood).
M/S VALLEY STAR ENTERPRISES
HASHMI INFRASTRUCTURE PRIVATE LIMITED
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .