REPAIRS / COMPREHENSIVE MAINTENANCE OF CHLORONOME PLANTS SUPPLY OF CHLORINE GAS AND CHEMICALS INCLUDING REPAIRS / MAINTENANCE OF CENTRIFUGAL AND SUBMERSIBLE PUMP SETS, PANEL BOARDS, STARTERS ETC OF WATER SUPPLY INSTALLATIONS AT TKD AND BABINA CANTT

Amount

Repair / comprehensive maintenance of electronic versatile chemical dosing system chloronome plants of make HIBRID/Delibac , 0-200 gms / hour capacity to ensure proper functioning and 100 % serviceability of all the plants including replacement of all unserviceable spare parts including carrying out necesary repairs . Notes :- (i) All spare parts shall be measured and paid seperately as supply only. Cost of labour is deemed to be included in the quoted rate. (ii) Total chloronome plants to be maintained are 09 Nos for a period of 06 months. A Minimum of 1 No highly skilled technician will be deployed to carry out the maintenance / repairs of chloronome plants at TKD and Babina Cantt on a daily basis to ensure 100% serviceability. (iii) Cost of all essential materials which are not otherwise specified in this schedule but are required to ensure smooth functioning of the chloronome plant are deemed to be included in the quoted rate. (iv) Adequate reserve for all necessary stores will be kept at the site by the contractor to avoid any delay in carrying out the repairs. (v) All T&P required to carry out the work at site will be provided by the contractor. Cost of the same is deemed to be included in the quoted rates. (vi) Only skilled / trained techinians will be deployed by the contractor to carry out the repairs of chloronome plants. Adequate saftey precautions including proper gas mask kit will be provided to the technicians by the contractor. (vii) Proper record of repairs / daily maintenance carried out and duly signed by the Engr-in-Charge / JE will be maintained. (viii) 01 Job includes maintanance of 01 dozing pump for a period of one month.(ix) All complaints in respect of chloronome plants will be attended and rectified on a daily basis. No payment will be admissible for the days when plant not worked. For a delay of more than 48 hours by the contractor in attending / rectifying the complaints of cloronome plants, a compensation of Rs. 250.00 / plant per day will be recovered as a penalty for the entire period of unserviceabilty of the defective plant.

Supply only Ring seal Part No HLC081201A for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Ball Part No HLC081202A for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Suction Valve (Part No HLC081203A) for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Discharge Valve (Part No HLC081204A) for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Tubing Connector (Part No HLC081205A) for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Tubing (Part No HLC081206A) for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Foot Valve (Part No HLC081207A) for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Antisyphn Valve (Part No HLC081208A)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Diaphragm (Part No HLC081209A) for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Oil seal (Part No HLC081210A)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Spring (Part No HLC081211B)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only SS shaft (Part No HLC081212B)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Retainer Plate (Part No HLC081213B)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Solinoid Coil (Part No HLC081214B)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Stroke Control Shaft (Part No HLC081215B)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Electronic Module (Part No HLC081216B)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Pump Housing (Part No HLC081217B)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Dosing Head (Part No HLC081218B)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Spacer Head (Part No HLC081219B)for electronic versatile chemical dosing system chloronome plants of Make HIBRID/Delibac/Pentair

Supply only Ammonia liquid in 100 ml bottle.

Supply only Nylon braided PVC flexible pipe, heavy duty 20 mm dia.all as per sample

Supply only Chlorine test kit with coloured ample complete with all testing fitments and 100 ml OT solution in rexine finish wooden box all as per sample.

Supply only Ortho tholodine solution in 500 ml bottle.

Supply only Crystal Alum (Ferric)

Supply only Copper Sulphate

Supply only Supply ony lime as per sample for water supply installations complete all as specified

Supply & fixing/ replacement of PVC core nylon brush 48 " long for suction sweeper (swimming pool claner)including necessary fittings including replacement of NRV & neceaasry fittings etc.

S&F in replacement PVC flexible pipe of suction sweeper as per sample complete all as specified.

Supply only Calcium Hypochlorite 65% to 70% chlorine content in packed with 45 Kg each drum (calcium based granular disinfectant for water treatment much more stable than chlorine gas and stronger than bleaching powder & sodium hypochlorite complete all as specified and directed. Make : Aquafit or equivalent as approved by NMPT committee of E-in-C's Branch. Note :-The contractor must submit the COC (Certificate of Compliance) in original from manufacturer by All India Authorised MES Distributor for each batch of product delivered indicating and including Chemical Analysis Report by All India Authorised MES Distributor. Note :- 1. The contractor must submit the COC (Certificate of Compliance) in original from manufacturer for each batch of product delivered including chemical analysis report.

S & F including leakage testing of 3-layer PP-R polypropylene random copolymer pipes of 25 mm outer dia SDR 7.4 (PN-16) antimicrobial fusion welded incl all PR-R plain & threaded polypropylene random fittings laid in trenches, ceiling or floors etc incl fixing arrangements complete.Make:-SUPREME/PRINCE/SFMC

All as per item No 31 here in before but 40 mm dia

S & F in replacement of PPR gate valve (brass insert) of 25 mm dia complete all as specified. Make :-SUPREME / PRINCE/ SFMC

All as per item No 33 above but 40 mm dia

S & F cast iron foot valves with flanged end in replacement 25 mm bore all as per including necessary rubber gasket, MS nuts, bolts, washers etc of suitable size complete all as specified and directed.

S & F cast iron foot valves with flanged end in replacement 50 mm bore all as per including necessary rubber gasket, MS nuts, bolts, washers etc of suitable size complete all as specified and directed.

S & F cast iron foot valves with flanged end in replacement 80 mm bore all as per including necessary rubber gasket, MS nuts, bolts, washers etc of suitable size complete all as specified and directed.

S & F cast iron foot valves with flanged end in replacement 100 mm bore all as per including necessary rubber gasket, MS nuts, bolts, washers etc of suitable size complete all as specified and directed.

S & F cast iron foot valves with flanged end in replacement 150 mm bore all as per including necessary rubber gasket, MS nuts, bolts, washers etc of suitable size complete all as specified and directed.

S & F cast iron foot valves with flanged end in replacement 200 mm bore all as per including necessary rubber gasket, MS nuts, bolts, washers etc of suitable size complete all as specified and directed.

M & L for repair/replacement of LT enclosures in replacement, 'G' frame panel boards, indoor type, AC 440 Volts of capacity of bus bar 800 Amps conforming to IS-8623 suitable for mounting 01 No incomer MCCB of "AA" frame with 630 Amps capacity and 3 Nos out going MCCBs of "G" frame including multifunction digital meter compraising parameters such as voltage, current, freequency, CT's, control fuses etctemp also incuding LED 3 phase indication lamp etc. Note :- Incoming & Outgoing MCCBs shall be measured and paid seperately. Make :Havells Cat No IHVGF25002 or equivalent in Legrand /ABB/AREVA /Schnieder/HPL

M & L for earthing to machinery / panel board with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to GI strips 32 x 6 mm by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes of light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways including charcoal and salt in layers all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

Supply and fixing of GI strip 32 x 6 mm fixed in ducts / on wall / in trenches / floors etc for earthing complete fixed to equipment / test point / earth electrode complete all as specified and directed

M & L for GI pipe 50 mm bore light grade laid under plinth, ground or fixed along walls for protection of cables complete all as specified and directed.

S & F in replacement of digital soft starter suitable for 30 HP motor, 3 phase 415 volt with comprehensive motor protection, programmable over load protection, built-in RTD & Thermistor inputs with constant current adaptive accelaration & de-accelaration for smooth start and stop operation of motor incl dismantling of u/s starter & installation / programming by skilled technician of original manufacturer, incl necessary mounting arrangement on existing panel such as fastener nuts & bolts and also fixing HRC fuse of suitable capacity onpanels with copper busbars etc as required complete all as specified and directed. Make:- L&T Cat No EMX3-0145B-411 or equivalent in Havells/HPL/C&S

S & F in repair/replacement of DOL starter suitable for 5 HP induction motor, 3 phase 440 volt complete with over load protection & adjustable relay range 5-10A, incl provision of mounting arrangement with MS flat strips 40 mm x 5 mm thick of suitable length and shape duly drilled and embedded to wall incl making good disturbed surfaces incl dismantling complete all as specified. Make : BCH cat part No CPEANK or L&T cat No SS97210 or or equivalent in Havells/HPL/C&S

S & F in repair/replacement of DOL starter suitable for 7.5 HP induction motor, 3 phase 440 volt complete with over load protection & adjustable relay range 8.9-13.5A, incl provision of mounting arrangement with MS flat strips 40 mm x 5 mm thick of suitable length and shape duly drilled and embedded to wall incl making good disturbed surfaces incl dismantling complete all as specified. Make : BCH cat part No CPEANK or L&T cat No SS97210 or or equivalent in Havells/HPL/C&S

M & L for FASD starter in replacement of suitable for electric motors in sheet enclosure Type MN, AC 3 Phase, 415 Volt, 50 Hz with thermal over load relay range 10-15 Amps incl provision of mounting arrangement with MS flat strips 40 mm x 5 mm thick of suitable length and shape duly drilled and embedded to wall incl making good disturbed surfaces complete all as specified and directed. Make- L&T cat No SS94362 oror equivalent in Havells/HPL/C&S

S & F in replacement of electronic type single phasing preventor suitable for protection of electric motors 3 phase 415 V, AC, 50 Hz complete all as specified. Make : Minilec or equivalent approved make

S&F in replacement of multifunction digital meter CT operated suitable for showing voltage,current,Hz,KW,KWH etc.

S&F in replacement of phase Indication led lamp (RYB) in liew of u/s neon indicator & control fuses set of three-01 Nos.

Taking out defective submersible pump set of discharge capacity varying from 4000 to 12000 GPH from bore wells / shallow wells including dismantling and taking out column pipes of any bore & length alongwith submersible cable, steel wire rope etc; and re-lowering the pump set after carrying out necessary repairs / replacement of defective parts all as specified and directed. Note :- (i) Spares for repairs/rewinding of pump and motor will be measured and paid separately. (ii) Costs of all necessary T&P required at site and transportation is deemed to be included in the rates quoted.

M & L for rewinding of submersible motors AC, 3 phase, 440 volt 4 to 7.5 HP with superior quality PVC insulated copper winding wire of identical gauge & specification of the existing short circuited winding wires with all necessary insulating materials incl cleaning of stator & slots and applying one coat of water proof epoxy paint to the exteriors of motor and testing complete all as specified on load of capacity. Note :- Any spares other than specified in the item will be measured and paid separately.

M & L for rewinding of submersible motors AC, 3 phase, 440 volt 10 to 15 HP with superior quality PVC insulated copper winding wire of identical gauge & specification of the existing short circuited winding wires with all necessary insulating materials incl cleaning of stator & slots and applying one coat of water proof epoxy paint to the exteriors of motor and testing complete all as specified on load of capacity. Note :- Any spares other than specified in the item will be measured and paid separately.

M&L for repairs to rotor assembly of submersible motor of any size/make incl cutting & cleaning of defective copper strips from rotor slots, filling cavities, gas welding/bracing and finishing complete all as specified.

Supply only motor bush upper and lower 4 to 7.5 HP for submersible motor complete all as specified.

Supply only motor bush upper and lower 10 to 15 HP for submersible motor complete all as specified.

Supply only rotor bearing sleeve upper and lower suitable for submersible motor of any size/capacity complete all as specified.

Supply only sand guard suitable for submersible pump set any size/capacity complete all as specified.

Supply only motor thrust bearing assembly complete suitable for 4 to 7.5 HP complete all as specified.

Supply only motor thrust bearing assembly complete suitable for 10 to 15 HP complete all as specified.

Supply only motor housing upper suitable for 4 to 7.5 HP complete all as specified.

Supply only motor housing upper suitable for 10 to 15 HP complete all as specified.

Supply only motor housing lower suitable for 4 to 7.5 HP complete all as specified.

Supply only motor housing lower suitable for 10 to 15 HP complete all as specified.

Supply only motor coupler sleeve with key suitable for submersible pump sets of any capacity.

M&L for carrying out repair to submersible pump of 4000 -7500 GPH capacity after dismantling the assembly for replacement of worn out spares such as stage bowls, impellers, pump shaft, sleeves, bushes etc; incl filling, turning & polishing works to pump shaft, GM impellers as necessiated, reassembling the pump after repairs and testing complete incl applying a coat of water proof epoxy paint to the external surfaces of pump all as specified and directed. Note - Any spares requires to be replaced will be measured & paid separately.

M&L for carrying out repair to submersible pump of 8000 to 12000 GPH capacity after dismantling the assembly for replacement of worn out spares such as stage bowls, impellers, pump shaft, sleeves, bushes etc; incl filling, turning & polishing works to pump shaft, GM impellers as necessiated, reassembling the pump after repairs and testing complete incl applying a coat of water proof epoxy paint to the external surfaces of pump all as specified and directed. Note - Any spares requires to be replaced will be measured & paid separately.

Supply only GM impellers with key and bushes suitable for 4000 to 7500 GPH capacity.

Supply only GM impellers with key and bushes suitable for 8000 to 12000 GPH capacity

Supply only pump shaft stainless steel suitable for 4000 to 7500 GPH capacity

Supply only pump shaft stainless steel suitable for 8000 to 12000 GPH capacity

Supply only non return valve for pump suitable for 4000 to 7500 GPH Capacity

Supply only non return valve for pump suitable for 8000 to 12000 GPH capacity

Supply only bearing bush for pump set suitable for 4000 to 7500 GPH Capacity

Supply only bearing bush for pump set suitable for 8000 to 12000 GPH capacity

Supply only CI bowl assembly complete with stage bolts suitable for 4000 to 7500 GPH Capacity

Supply only CI bowl assembly complete with stage bolts suitable for 8000 to 12000 GPH capacity

Supply only neck rings for pump sets of any capacity

Supply only stage bowl bush GM suitable for pump sets of any capacity

Supply only distance sleeve suitable for pump sets of any capacity

M&L for water proof 'M' seal cable jointing kit with hardner compound, copper ferrule, sleeves, cotton / insulation tape and all materials complete suitable for submersible cable PVC insulated and sheathed, 6 to 10 sqmm flat, 3 core, 1100 volt grade complete all as specified and directed.

M&L for asbestos rubber gasket packing, 4 mm thick suitable for 50/80/100 mm dia flanged column pipes complete all as specified.

M&L for MS hexagonal nut and bolt, heavy duty with spring washer of 12 mm dia and 80 mm long all as specified and directed.

M & L for dismantling and taking up u/s centrifugal pump sets of any size from foundations after disconnecting electric & water connections and transportation from site to contractor's workshop for carrying out repairs to pump sets /rewinding of motors as required incl re-assembling, re-fixing in position, incl connecting & testing complete as specified. Note - Spares required to be replaced will be measured and paid separately.

M & L for opening up short circuited electric induction motor of 5 HP capacity 3 phase AC 440 Volts, cutting and removing the short circuited stator winding coils complete and re-winding the same with super enamelled copper conductor wires of appropriate size as per the existing gauge including cleaning of slots, all necessary insulating materials, varnishing, drying and testing on load complete all as specified.

M & L for opening up short circuited electric induction motor of 7.5 HP capacity 3 phase AC 440 Volts, cutting and removing the short circuited stator winding coils complete and re-winding the same with super enamelled copper conductor wires of appropriate size as per the existing gauge including cleaning of slots, all necessary insulating materials, varnishing, drying and testing on load complete all as specified.

M & L for opening up short circuited electric induction motor of 10 to 12.50 HP capacity 3 phase AC 440 Volts, cutting and removing the short circuited stator winding coils complete and re-winding the same with super enamelled copper conductor wires of appropriate size as per the existing gauge including cleaning of slots, all necessary insulating materials, varnishing, drying and testing on load complete all as specified.

M & L for opening up short circuited electric induction motor of 15 to 30 HP capacity 3 phase AC 440 Volts, cutting and removing the short circuited stator winding coils complete and re-winding the same with super enamelled copper conductor wires of appropriate size as per the existing gauge including cleaning of slots, all necessary insulating materials, varnishing, drying and testing on load complete all as specified.

M & L for opening up short circuited electric induction motor of 40 HP capacity 3 phase AC 440 Volts, cutting and removing the short circuited stator winding coils complete and re-winding the same with super enamelled copper conductor wires of appropriate size as per the existing gauge including cleaning of slots, all necessary insulating materials, varnishing, drying and testing on load complete all as specified.

M & L for opening up short circuited electric induction motor of 60 HP capacity 3 phase AC 440 Volts, cutting and removing the short circuited stator winding coils complete and re-winding the same with super enamelled copper conductor wires of appropriate size as per the existing gauge including cleaning of slots, all necessary insulating materials, varnishing, drying and testing on load complete all as specified.

M & L for opening up short circuited electric induction motor of 90 to 100 HP capacity 3 phase AC 440 Volts, cutting and removing the short circuited stator winding coils complete and re-winding the same with super enamelled copper conductor wires of appropriate size as per the existing gauge including cleaning of slots, all necessary insulating materials, varnishing, drying and testing on load complete all as specified.

S & F terminal connector of 5 HP motor with high trensile brass bolts & nuts, washers etc complete all as specified and directed.

S & F terminal connector of 7.5 HP motor with high trensile brass bolts & nuts, washers etc complete all as specified and directed.

S & F terminal connector of 10 to 12.50 HP motor with high trensile brass bolts & nuts, washers etc complete all as specified and directed.

S & F terminal connector of 15 to 30 HP motor with high trensile brass bolts & nuts, washers etc complete all as specified and directed.

S & F terminal connector of 40 HP motor with high trensile brass bolts & nuts, washers etc complete all as specified and directed.

S & F terminal connector of 60 HP motor with high trensile brass bolts & nuts, washers etc complete all as specified and directed.

S & F terminal connector of 90 to 100 HP motor with high trensile brass bolts & nuts, washers etc complete all as specified and directed.

S & F of PVC fan blade for motors of 5 HP capacity complete all as specified.

S & F of PVC fan blade for motors of 7.5 HP capacity complete all as specified.

S & F of PVC fan blade for motors of 10 to 12.50 HP capacity complete all as specified.

Repairs to squirrel cage induction motor of 5 HP shaft by metal filling, welding / cutting & grinding, polishing to required sizes

Repairs to squirrel cage induction motor of 7.5 HP shaft by metal filling, welding / cutting & grinding, polishing to required sizes

S & F MS pump motor coupling of 5 HP as per the existing size and shape for pump sets

S & F MS pump motor coupling of 7.5 HP as per the existing size and shape for pump sets

S & F MS pump motor coupling of 10 to 12.50 HP as per the existing size and shape for pump sets

S & F MS pump motor coupling of 15 to 30 HP as per the existing size and shape for pump sets

S & F MS pump motor coupling of 40 HP as per the existing size and shape for pump sets

S & F MS pump motor coupling of 60 HP as per the existing size and shape for pump sets

S & F MS pump motor coupling of 90 to 100 HP as per the existing size and shape for pump sets

M & L for motor end ball / roller bearing with good quality grease suitable for 5 HP capacity pump sets

M & L for motor end ball / roller bearing with good quality grease suitable for 7.5 HP capacity pump sets

M & L for motor end ball / roller bearing with good quality grease suitable for 10 to 12.50 HP capacity pump sets

M & L for motor end ball / roller bearing with good quality grease suitable for 15 to 30 HP capacity pump sets

M & L for motor end ball / roller bearing with good quality grease suitable for 40 HP capacity pump sets

M & L for motor end ball / roller bearing with good quality grease suitable for 60 HP capacity pump sets

M & L for motor end ball / roller bearing with good quality grease suitable for 90 to 100 HP capacity pump sets

S & F star rubber bush coupling for motor 5 HP complete all as specified and directed.

S & F star rubber bush coupling for motor 7.5 HP complete all as specified and directed.

S & F star rubber bush coupling for motor 10 to 12.50HP complete all as specified and directed.

S & F star rubber bush coupling for motor 15 to 30HP complete all as specified and directed.

S & F star rubber bush coupling for motor 40 HP complete all as specified and directed.

S & F star rubber bush coupling for motor 60 HP complete all as specified and directed.

S & F star rubber bush coupling for motor 90 to 100 HP complete all as specified and directed.

Supply and fix star coupling key any size as per sample complete

M&L for carrying out replacement of u/s centrifugal pump set shaft of 5 HP capacity

M&L for carrying out replacement of u/s centrifugal pump set shaft of 7.5 HP capacity

M&L for carrying out replacement of u/s centrifugal pump set shaft of 10 to 12.50 HP capacity

M&L for carrying out replacement of u/s centrifugal pump set shaft of 15 to 30 HP capacity

M&L for carrying out replacement of u/s centrifugal pump set shaft of 40 HP capacity

M&L for carrying out replacement of u/s centrifugal pump set shaft of 60 HP capacity

M&L for carrying out replacement of u/s centrifugal pump set shaft of 90 to 100 HP capacity

M & L for carrying out replacement of CI pump impeller of 5 HP capacity

M & L for carrying out replacement of CI pump impeller of 7.5 HP capacity

M & L for carrying out replacement of CI pump impeller of 10 to 12.5 HP capacity

S & F in replacement of gun metal bush complete set of two as per sample for centrifugal pump set Kirloskar of 15 HP

S & F in replacement of gun metal bush complete set of two as per sample for centrifugal pump set Kirloskar of 30 HP

S & F in replacement of gun metal bush complete set of two as per sample for centrifugal pump set Kirloskar of Model UP 150/40 of 100 HP

S & F in replacement of gun metal bush complete set of two as per sample for centrifugal pump set Kirloskar of Model UP 100/36 of 100 HP

S & F in replacement of gun metal bush complete set of two as per sample for centrifugal pump set Kirloskar of Model SCT 100/38 of 60 HP

S & F in replacement of gun metal bush complete set of two as per sample for centrifugal pump set Kirloskar of Model DSM 80/36 40 HP

S & F in replacement of gun metal sleeve set of two Nos suitable for Kirloskar pump sets 15 HP

S & F in replacement of gun metal sleeve set of two Nos suitable for Kirloskar pump sets 30 HP

S & F in replacement of gun metal sleeve set of two Nos suitable for Kirloskar pump sets 40 HP

S & F in replacement of gun metal sleeve set of two Nos suitable for Kirloskar 60 HP 6 UP 3 series

S & F in replacement of gun metal sleeve set of two Nos suitable for Kirloskar pump sets 100 HP DSM -5 series

S & F in replacement of pump end ball bearing suitable for Kirloskar 15 HP.

S & F in replacement of pump end ball bearing suitable for Kirloskar 30 HP.

S & F in replacement of pump end ball bearing suitable for Kirloskar 40 HP.

S & F in replacement of pump end ball bearing suitable for Kirloskar 60 HP 6 UP 3 series.

S & F in replacement of pump end ball bearing suitable for Kirloskar pump sets 100 HP DSM -5 series,

S & F GM neck rings (set of 2) as per sample suitable for centrifugal pump set Kirloskar 15 HP capacity

S & F GM neck rings (set of 2) as per sample suitable for centrifugal pump set Kirloskar 30 HP capacity

S & F GM neck rings (set of 2) as per sample suitable for centrifugal pump set Kirloskar 40 HP capacity

S & F GM neck rings (set of 2) as per sample suitable for centrifugal pump set Kirloskar 60 HP capacity

S & F GM neck rings (set of 2) as per sample suitable for centrifugal pump set Kirloskar 100 HP capacity

S & F in replacement of impeller itermediate gun metal collar valve guide same as per sample for double acting impeller 100 HP pump set

S & F in replacement gun metal impeller single acting suitable for Kirloskar 15 HP capacity.

S & F in replacement gun metal impeller single acting suitable for Kirloskar 30 HP capacity

S & F in replacement gun metal impeller single acting suitable for Kirloskar 40 HP capacity.

S & F in replacement gun metal impeller single acting suitable for Kirloskar 60 HP 6 UP 3

S & F in replacement gun metal impeller single acting suitable for Kirloskar 100 HP DSM - 5 Series

M & L for repairing micro processor based water level indicator system in between UG sump sensor to main water level indicator LED display unit showing indication at pump house by replacing the circuit board, 10 pair UG copper cable & other accessories complete all as specified and directed.

S & F in replacement of MCCB, 4 Pole, 415 Volt AC, 50 Hz, rupturing capacity 50 KA with adjustable thermal and fixed magnetic tripping systems against over load and short circuit conditions of capacity 630 Amp conforming to IS:13947 (Part-2) Ics = 100%ICU Make : Havells Cat No. IHLLNFBF0630 or equivalent in Legrand /ABB/AREVA /Schnieder/HPL /Siemens

S & F in replacement of MCCB, 4 Pole, 415 Volt AC, 50 Hz, rupturing capacity 36 KA with adjustable thermal and fixed magnetic tripping systems against over load and short circuit conditions of capacity 400 Amp conforming to IS:13947 (Part-2) Ics = 100%Icu Make : Havells Cat No. IHLLSEBFBF0400 or equivalent in Legrand /ABB/AREVA /Schnieder/HPL /Siemens

S & F in replacement of MCCB, 4 Pole, AC 415 V 50 Hz rupturing capacity 36 KA with adjustable thermal and fixed magnetic tripping systems against over load and short circuit conditions of capacity 250 Amp conforming to IS:13947 (Part-2) complete. Ics = 100%Icu Make : Havells cat part No IHLLSECF0250 or equivalent in Legrand /ABB/AREVA /Schnieder/HPL/Siemens

S & F in replacement of MCCB, AC 3 phase, 4 pole, 415 volt, 200 Amps capacity with breaking capacity 25 KA, with electro-magnetic tripping system against over load and short circuit conditions complete. Ics = 100%Icu Make Havells Cat No. IHLANCF0200 or equivalent in Legrand /ABB/AREVA /Schnieder/HPL

S & F in replacement of MCCB, 4 Pole, 415 Volt AC, 50 Hz, rupturing capacity 25 KA with adjustable thermal and fixed magnetic tripping systems against over load and short circuit condition of capacity 125 Amp confirming to IS-13947 (Part-2) complete.Ics = 100%Icu Make Havells cat part No IHLANCF125 or equivalent in Legrand /ABB/AREVA /Schnieder/HPL /Siemens

S & F in replacement of MCCB, 4 Pole, 415 Volt AC, 50 Hz, rupturing capacity 25 KA with adjustable thermal and fixed magnetic tripping systems against over load and short circuit condition of capacity 100 Amp confirming to IS-13947 (Part-2) complete. Make : Havells cat part No IHLGHF0100 or equivalent in Legrand /ABB/AREVA /Schnieder/HPL/Siemens

M & L for submersible cable, PVC insulated and sheathed, 3 core, 6 sqmm, multistranded copper conductor, 1100 volt grade, heavy duty all as specified and directed. Make: Havells/HPL/Polycab/Plaza

M & L for submersible cable, PVC insulated and sheathed, 3 core, 10 sqmm, multistranded copper conductor, 1100 volt grade, heavy duty all as specified and directed.Make: Havells/HPL/Polycab/Plaza

M&L for MS Fabrication work, made out of structural steel sections as in frame work for cable & piping ducts / MS door panels etc at water supply installations, MS angles / flats / plain sheets of appropriate gauge, cut to size and made to the exisitng shape suitable for fixing MS chequred duct covers / door panels, including nuts, bolts and washers, welding / bracing works, bending cold or hot drilling holes for bolts in any shape or sizes as required including one coat of primer and two coats of synthetic enamel paint to the entire steel surfaces all as specified and directed.

S & F in replacement of galvanised iron pipe medium grade of 50 mm bore of existing length as per site requirements for suction/delivery lines of submersible pump sets under floor or along the inner walls of the shallow well with proper fixing arrangement complete all as specified and as directed.

S & F change over switch with advanced neutral, ON LOAD, 1000 Amps, 4 pole, AC 415 Volt, manual Change Over in sheet metal enclosure with operating handle conforming to IS:13947 (Part-3) complete all as specified and directed. Make : Havells cat part No IHCNF001000 or equivalent in L&T/C&S

S & F change over switch with advanced neutral, ON LOAD, 100 Amps, 4 pole, AC 415 Volt, manual Change over insheet metal enclosure including operating handle conforming to IS:13947 (Part-3) complete all as specified and directed. Make : L&T cat part No CO11000OSOO or equivalent in Havells/C&S

M&L for repairs to star delta starter, fully automatic, AC 3 Phase, 440 V of 10 HP capacity of any make incl replacement of all u/s spares, integral wiring with appropriate gauge, copper conductor cables, copper lugs, terminal block with brass bolts, nuts & washers etc all as specified. Note :- 1. Spares to be replaced will be measured and paid seperately as supply only. 2. Cost of labour and copper lugs, terminal block with brass bolts, nuts & washers included in the quoted rate.

Supply only contactor repair kit without coil.

Supply only power contactors.

Supply only over load protection relay of suitable range

Supply only electronic timer device 0-20 second delay.

S & F of high performance LED street light fittings of 24W / 25 W power consumption complete, LM 80-08 standard with useful L-70 life of 50000 hrs input voltage range of 140 volts (nominal rated voltage -240 volts) incl taking down of street light fittings of any type complete all as specified. Make -Havells cat pat No LHETBXU7PA6S025, Cat Part No Indus/25W/LS of C&S make or equivalent in Phillips/Wipro/Shakti

S & F of high performance LED street light fittings of 45/48 W power consumption complete, LM 80-08 standard with useful L-70 life of 50000 hrs input voltage range of 140 volts (nominal rated voltage -240 volts) incl taking down of street light fittings of any type complete all as specified. Make -Havells cat pat No LHETAXU7PN6W048, Cat Part No Indus/45W/LS of C&S make or equivalent in Phillips/Wipro/Shakti

S & F high performance LED street light fitting of 70 watts power consumption complete, LM 80-08 standard with useful L-70 life of 50000 Hrs input voltage range of 140 volts (nominal rated voltage -240 volts ) incl taking down of street light fittings of any type complete all as specified and directed. Make -Havells cat pat No LHETBXU7PA6J070, Cat Part No Indus/70W/LS of C&S make or equivalent in Phillips/Wipro/Shakti

Fabricating and fixing wall mounted display board suitable for flow charts, schematic diagrams, layout of machinery, technical instructions etc, at water supply installations with overall external dimensions 1500 mm x 1000 mm, computerised colour printing on seamless flex sheets and evenly pasted to 6 mm thick plywood grade BWP using premium adhesives, carved teak wood frame work to the display board duly varnished including 50 mm teak wood cornices all around the display area with necessary hooks and hanging arrangement all as specified and directed. Note: The soft copies of printing matter/drawings shall be provided by the Dept.

M & L for opening of soft starter EMX 3 series of L&T make 40-100 HP capacity from the existing panel (by a skilled representative of original manufacturer) for servicing, repair, replacement, refixing of spares like control card (EMX3 Series), display, supply card, contactor, CT, fuses etc, tightening of loosen integral wiring, copper lugs, terminal blocks, nut and bolts, washers etc complete all as specified and directed by Engr-in-Charge. Note :- 1. The Manufacturers Rep shall be got approved by the GE. 2. spares to be replaced will be measured and paid seperately as supply only. 3. Cleaning of dust and other materials to be carried out only using of CRC 2-26. 4. Cost of skilled representative, tools, wiring, copper lugs, terminal blocks, nuts and bolts, cleaning materials, etc required at site included in the quoted rates. 5. If any damage occured in the spares during repair the same will be replaced by the contractorat at his own cost.

Supply only control card of soft starter of L&T Cat No EMX3-0076B-411 suitable for 40 HP capacity.

Supply only control card of soft starter of L&T Cat No EMX3-0105B-411 suitable for 60 HP capacity.

Supply only control card of soft starter of L&T Cat No EMX3-0145B-411 suitable for 100 HP capacity.

Supply only ML-10, contactor AC 3, Cat No SS90935 of L&T make or equivalent model of approved make.

Supply only suitable CT for soft starter of 100 HP capacity

Supply only high speed HRC fuse links of capacity 280 FM 690 Volt AC 125-400 Amp, Make - Bussmann or any equivalent model of approved make.

Supply and laying under ground cable XLPE insulated PVC sheathed multistranded aluminium conductor cable armoured of size 10 sqmm 4 core 1100 volt grade in trenches/floors or on poles complete all as specified.

Supply and laying under ground cable XLPE insulated and PVC sheathed, multi stranded aluminium conductor cable armoured 4 core 25 sq mm, 1100 Volt grade in trenches / floors or on poles complete including dismantling and removing old unserviceable cable complete all as specified and directed.

Supply and laying under ground cable XLPE insulated and PVC sheathed, multi stranded aluminium conductor cable armoured 3.5 core 50 sq mm, 1100 Volt grade in trenches / floors or on poles complete including dismantling and removing old unserviceable cable complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth in soft/loose soil and getting out for removing / laying of pipe lines / UG cables etc; complete all as specified.

Returning and filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 CM thick all as specified.

Removal of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete.

M & L for providing of fine dry river sand cushion in trenches for cable protection free from sharp materials Note - punned thickness shall be measured and paid.

Supplying and laying precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete as directed. Make: Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S NAVYA TILES, 68, NEHRU PARK, SARDARPUR,JODHPUR- 342003 Ph. 0291-2650094, 2627963(C) SAP PAVERS JODHPUR (D) SAGAR TILES SAHARANPUR (E) Star Tiles & Industries, Rama Devi, Kanpur

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius built in CM (1:4) as in foundation of equipment, platform, ramp, supporting pillars of pipes, protection wall of UG sump incl demolistion of existing brick work built in cement mortar complete all as specified and directed.

M& L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation filling & mass concrete incl demolition complete all as specified.

M&L for plastering in CM (1:4) 10 mm thick on fair faces of brick work or concrete surface/ cable duct / floor including demolition complete all as specified and directed.

M&L for repairs to hand pump of exising make and size including replacement of head and handle assembly, plunger rod, GI pipe, reducer cap, upper & lower valve assembly etc of hand pump assembly dismantling from 100/150 mm dia bore well of any depth for cleaning, removing of scaled, muddy, corroded particle from the accessories and making hand pump functional complete all as specified and directed. Note- 1. Accessories for replacement shall be measured and paid seperately under respective items. Cost of labour for dismantiling, installing, testing and commissioning of hand pump is deemed to be included in the quoted rate. 2. All other minor items / spares / T&P etc which are otherwise not specified but essential to complete the work are deemed to be included in the quoted rates.

S&F in replacement GI tube 32 mm bore, medium grade for riser pipes of hand pump of any length complete all as specified and directed.

S & F in replacement of u/s head and hand assembly for hand pump including nut & bolts etc complete all as specified and as directed.

S & F in replacement of u/s plunger rod for hand pump complete all as specified.

S & F in replacement of u/s upper & lower valves for hand pump complete all as specified.

S & F in repair sluice valves 80 mm dia bore of any size / make installed at water supply rising or distribution lines and incl dismantling and taking up or down of unserviceable SS / MS spindle and gun metal / bronze check nuts with replacement incl necessary rubber packing, nuts, bolts, washers etc and re-assembling in position after repair complete all as specified and directed by Engr-in-charge.

All as per Srl item No. 209 here-in-before but 100 mm dia bore

All as per Srl item No. 209 here-in-before but 150 mm dia bore

All as per Srl item No. 209 here-in-before but 200 mm dia bore

All as per Srl item No. 209 here-in-before but 250 mm dia bore

All as per Srl item No. 209 here-in-before but 300 mm dia bore

M&L for Fully automatic star delta starter in replacement suitable for electric motor In Sheet Enclosure Type MU-G, AC 3 Phase, 415 Volt, 50 Hz with thermal over load relay range 13-21 Amps including provision of mounting arrangement with MS flat strips 40 mm x 5 mm thick of suitable length and shape duly drilled and embedded to wall including making good disturbed surfaces complete all as per Cat No. SS95984 of Make L&T or equivalent model of approved makes.

M&L for mild steel coupling suitable for 7.5 to 12.5 HP centrifugal pump sets as per sample complete all as specified and directed.

S&F in replacement gun metal gate valves of 40 mm bore, (class I), ISI marked with iron wheel head, screwed both ends for iron pipe including dismantling and taking up/ down old U/S gate valves and depositng to MES store yard all as specified and directed.Make:

S&F in replacement gun metal gate valves of 50 mm bore, (class I), ISI marked with iron wheel head, screwed both ends for iron pipe including dismantling and taking up/ down old U/S gate valves and depositng to MES store yard all as specified and directed.

M & L for cutting and removing unwanted grass, wild growth incl bushes and shrubs from the roots below ground level at various over head tanks premises about 15 mtr radious with approaching road and removing boulders from a depth not more than 25 cms below normal ground level and depositing where directed and levelling / pruning the entire cleaned area to even finish complete all as specified and directed at site.

M&L for construction of valve chamber in replacement 950 x 950 x 950 internal dimensions, 6 mm thick mild steel sheet cover with 2 Nos mild steel hinges welded to angle iron frame of 40 mm x 40 mm x 6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), PCC bed (1:4:8) type D-2, 150 mm thick, plastering 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces including demolition of old valve pit and removal of debris out of MOD land complete all as specified and directed.

All as per Srl item No 220 here-in-before but size 1050 mm x 1050 mm x 950 mm

M&L for preperation of old decorated surfaces of steel and applying one coat of synthetic enamel paint on exterior surfaces of steel structures, panel boards, machinery, exposed valve pit covers, PCC foundations, Sluice valves, pump sets, pipe lines etc of water supply installation complete all as specified and directed by Engr-in-Charge.

S&F in replacement of integral HID lamp post top lantern, decorative design 1 x 18 Watt comprising LED, 18 W lamp holder, ballast, all accessories pre-wired including GI pipe of 40 mm dia medium grade of required length up to 3 mtr length grouted in ground in vertical position with and including foundation of 30 cm x 30 cm x 40 cm in PCC 1:3:6 type C1 including necessary fixing arrangement, connection with PVC insulated and sheathed 2 core 2.5 sqmm stranded copper conductor of required length from sunk box / junction box to fitting complete all as specified and directed. Make : Bajaj cat No BJDPTI 18 OPAL product code No 160432 or equivalent model of approved make of Havells/Wipro/Phillips

M/S Kharya Associates