SPECIAL REPAIR TO ROOF TREATMENT IN BLDG NO AM-30 AT AMU SPECIAL REPAIR TO BLDG NO CB-289 AT SW DIV AND PROVN OF DRAINAGE BEHIND KITCHEN AND OR LIVING AREA IN DEMO MACH COY UNDER GE MAINT INFANTRY SCHOOL MHOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) unreinforced

Material and labour for Plain Cement concrete (1:5:10), type E2 with using 40mm graded stone aggregate as in filling of sunken floor as directed and specified.

PCC (1:2:4) type (B -0) using 12.5 mm graded stone aggregate 25 mm thick mixing with WPC (liquid) as in bedding in sunken portions etc complete all as specified and directed. Note : WPC (liquid) shall be measured & paid separately

M & L for Non skid ceramic tiles coloured, 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.11 Sqm but n. exc 0.18 Sqm, over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles as directed and specified.

M & L for Glazed ceramic coloured tiles in vertical surfaces of size 450X300X7 to 8 mm thick, including 10mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles as directed and specified.

S & F in repairs of Vitrious china coloured wash down water closet (Pedestal pattern) including fixing bolt and plastic water closet seat,coloured closed pattern with flat bottom cover and mild steel chromium plated or aluminised hinges device complete all as specified and directed

Supply and Fix in repairs of PVC low level flushing cistern 10 ltrs capacity, white with all fitting and fixtures including brackets and 32mm bore PVC flush pipe complete all as specified and directed

S&F in repairs of Brass chromium plated two way bib tap cock 15mm bore complete all as specified and directed

S & F in repairs of health foucet (Hand Jet) 15mm bore with & incl. flexible pipe 1.0 to 1.5 mtr in length wall mounted and Brass Chromium Plated nuts.complete all as specified and directed.

S & F in repair of Pillar taps swan neck 15 mm bore cast copper alloy chromium plated fancy type as specified and directed

S&F in repairs of Brass chromium plated one way angle stop cock 15mm bore complete all as specified and directed

S&F in repairs of CP over head shower rose of dia 125mm, fancy type with arm and wall flange. complete all as specified and directed

Supply and Fix in repairs of PVC connections, 600 mm long with PTMT nuts suitable for connecting 15 mm bore pipes complete all as specified and directed

S & F in repairs of Wall mixture CP hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S&F in repairs of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm vide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

Supply & fixing in repair of SS tubular towel rail, 60 cm long, 20mm bore,complete all as specified & directed.

S & F in repair of SS Toilet paper holder,complete all as specified & directed.

Taking up or down 15 mm bore steel tubing and connections etc complete as specified and directed.

Taking up or down 20 mm bore steel tubing and connections etc complete as specified and directed.

S & F of steel water tubing 15 mm bore, medium grade glavanised, with all fittings and fixed complete to walls and ceilings or laid in floors as directed and specified.

Refixing of old steel tubing and connections of 15mm bore obtained from item No.19 in new or old position to walls, ceiling, floors, etc as directed and specified.

S & F of steel water tubing 20 mm bore, medium grade glavanised, with all fittings and fixed complete to walls and ceilings or laid in floors as directed and specified.

Refixing of old steel tubing and connections of 20mm bore obtained from item No.20 in new or old position to walls, ceiling, floors, etc as directed and specified.

Cutting holes in brick walls built in cement mortar exceeding half brick but n.exceeding one brick for inserting hold fasts or similar work and make good the dismantled portion in cement concrete 1:2:4 type B-1 as directed and specified.

S&F in repairs of PVC Nahani trap with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete.

Supply & fix in repairs of PVC ( SWR) pipe 75mm bore single socketed in any length with rubber ring joints, fixed to wall, fixed in repair complete all as specified and directed .

Supply & fix in repairs of PVC (SWR) pipe 110 mm bore in any length fixed to walls with clamps and laid in floors etc. complete all as specified and directed.

Supply and fixing of PVC ( SWR ) bends 75mm bore any radius, diminishing pieces or tapers complete all as specified and directed.

Supply and fixing of PVC ( SWR ) bends 110mm bore any radius, diminishing pieces or tapers complete all as specified and directed.

S & F of mild steel butt hinges 100mm size cold rolled medium weight and fixed as directed and specified.

S & F of Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed..

S & F of Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

S&F in repair of MS helical door spring 200 mm size complete all as specified and directed.

S & F in repair of galvanized mild steel wire cloth 0.63 mm nominal dia of wire and average width of apparature 1.40 mm fixed with tinned tacks or galvanized wire staples all as directed and specified.

Supply & fix of Aluminium Sliding door bolts, plate type, 300 mm long complete all as specified & directed.

S & F in repair of 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane as directed and specified.

Taking down shutters of any description exceeding 1 sqm but n exc 2 sqm each complete all as spd and directed

S&F of Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemi cally pressure treated complete all as specified & directed.

Supply and fix of 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) and as directed.

S & F of second class hardwood small fittings such as door and window stops and the like n.exceeding 200 cu cm each fixed as directed and specified.

Material and labour for preparation of new wooden surfaces any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as directed and specified.

Materials & labour for complete removal of existing treatmemt and finishing of wall with Birla/J K wall putty and applying two coat of Oil Bound distemper on wall of , any colour complete all as specified & directed.(Note: Putty shall be measured and paid seperately).

Materials & labour for 3mm thick wall care putty on walls complete all as specified & directed.

Material and labour for preparation of old painted wooden surfaces of any description or other wise described over 10cm width or girth and applying one coat of synthetic enamel paint all complete all as specified & directed.

Material and labour for preparation of old steel surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M & L for complete removal of old decorated plastered surfaces of wall,pillasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a coat of primer (X2) complete all as specified and directed Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) Make of primer :- Asian (X2) or Equivalent Note :- (a) Each stage i.e preparation of surfaces ,application of primer, application of first coat. application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item. complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, mass and efflorescent salts and trading oil and greasy spots and evenly applying one coat of white wash on surfaces of walls etc complete all as specified and as directed.

All as per item No. 48 above but one coat of white wash on ceiling complete all as specified and as directed.

S & F in repairs of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

Taking down cement or cement lime plaster on brick walls, including raking out joints, hacking for key, scrubbing down with water, etc in patches complete.

M&L for rendering 15mm thick in CM (1:4) on any faces of brick or concrete surface with water proofing compound (liquid), finish the surface even and smooth without using extra cement all as specified and directed. Note : WPC liquid shall be measured and paid separately.

M & L for 15 mm thick rendering in cm (1:6) on other than fair faces of brick work or concrete surfaces or plain cement block masonry surfaces, finished even & smooth without using exta cement complete all as specified and directed.

M & L for 5mm thick rendering in Cement Mortar (1:3) to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall, pillasters,cornices etc (upto G+1 storied bldgs) scrapping down , brooming down or steel wire brushing, and washing with water after completion of precoat treatment apply two coats of Anti fungal Weather coat paint (Exterior emulsion) white or tinted over a coat of primer (X2) complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of JK/Birla white wall putty complete all as specified and directed.(Note: putty shall be paid and measured seperately.)

M & L for three coat of white wash on new plastered surfaces of celing including preparation of surfaces complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete.

S&F of prelaminated partical board 18/19mm thick interior grade prelaminated on one side with decorative choice and other side balancing white lamination with and including external teak wood liping 6mm thic and 18/19mm wide fixed with nail on edge complete all as specified and directed

M & L for 75 mm thick cement concrete (1:3:6), type C2, with using 40 mm graded stone aggregate as in floor/plinth protection, finish the surface even and smooth without using extra cement including forming constructions joints and filling the same with bitumen filler complete as specified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and getting out in soft and loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m all as directed.

M & L for Cement concrete (1:3:6) Type C-2 using 40mm graded stone aggregate as in surface channels and drains all as specified and directed.

M & L for bricks work with sub class 'B' bricks modular straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

M&L for Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping and plinth course of surface channels and drains all as specified and directed.

M & L for precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in landings , cover slabs (for manholes ,drain etc ) shelves and similar work etc complete set in CM (1:4) all as specified and directed.

S & F of mild steel TMT bars 10mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality etc complete.

All as per item No 70 above but 6mm to 8mm dia, Complete all as specified and directed.

Demolition of cement concrete (unreinforced) in roof/terrace other than ground floor etc, including existing roof treatment of any description not exceeding 15cm thickness as directed and specified.

Roughening surface of roof by picking, sweeping clean and washing down with water to remove dust etc as directed and specified.

M & L for Brushing with neat cement slurry @ 3 Kg per Sqm area mixed with integral water proofing compound as specified and directed (WPC shall be measured and paid separately under respective item).

M & L for plain cement concrete (1:2:4) type B-0 with using 12.5 mm graded stone aggregate in roof top levelling course/chajja padding/benching, etc, including necessary form work and finish the surfaces even and smooth without using extra cement complete as specified and directed.

M & L for Providing, cement concrete (1:2:4) Type B-1 using 20mm graded stone aggregate as in roof kerbs, benching etc rounded or chamfered on edge complete all as specified and directed.

M & L for Providing, cement concrete (1:2:4) Type B-1 using 20mm graded stone aggregate as in coping of parapets etc including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M & L for rendering 15 mm thick in cement plaster (1:4) on roof surface mixed with water proofing compound (liquid) and finished even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid separately under respective item). Note : WPC (liquid) shall be measured and paid separately

M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete.

M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid seperately.)

M & L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed.Note: Application of APP membrane must be done by authorised applicator of membrane manufacturer.

M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm each coat on water proofing treatment with preparation of surface as on non assesible area complete all as specified and directed.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved.

Disconnecting existing tanks exc 500 and not exc 1000 Lit capacity, setting aside (or lowering if required) for, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Disconnecting existing tanks exc 1000 and not exc 2000 Lit capacity, setting aside (or lowering if required) for cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Disconnecting existing Solar heater tanks including solar panel, MS stand etc compleate of exc 500 and not exc 1000 Lit capacity, setting aside (or lowering if required) and hoisting if required reconnecting and re-fixing in position. Complete

S&F of 500 ltr capacity rotational moulded polyetlylene water storage tanks of double layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed including taking down old tanks

S&F of 1000 ltr capacity rotational moulded polyetlylene water storage tanks of double layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed including taking down old tanks

S&F in repairs of Gun-metal, globe or gate valves,half turn with lever arm, screwed both end for iron pipe 15 mm bore Complete all as specified and directed

S&F in repairs of Gun-metal, globe or gate valves, half turn with lever arm, screwed both end for iron pipe 20 mm bore Complete all as specified and directed.

S & F of Ball brass valves of 20 mm bore high pressure with polythene float and fly- nut complete screwed for iron pipe or brass ferrule etc complete.

Removing demolised material exc. 250m and n.exc 500 m deposited where directed at a level n.exc. 1.5m above the starting point all as directed.

ss construction

NIDHI CONSTRUCTION

M/S UnitedConstruction

Goyal Construction

Miittal Construction