Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.1 L+₹5.1 L (17.8%)Rejected-Finance NORTH BENGAL UNIVERSITY NEEMTALA PO NORTH BENGAL UNIVERSITY DIST DARJEELING WB | L2 | Rejected-Finance NOT LOWEST BIDDR | |
| 3 | L3₹34.8 L+₹5.8 L (20.2%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG 793009 MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L3 | Rejected-Finance NOT LOWEST BIDDR | |
| 4 | L4₹37.2 L+₹8.3 L (28.7%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST BIDDR | |
| 5 | L5₹37.5 L+₹8.5 L (29.5%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST BIDDR |
Tender Value
₹37.4 L
EMD Value
₹74,800
Closing Date
16 Jan 2020, 6:00 pmClosed
GE BENGDUBI
Bengdubi Military Station, PO-Bengdubi, Dist-Darjeeling, Pin 734424
GE/BENG/47 OF 2019-20 REPAIR AND POLISHING OF WOODEN CHAIRS OF VARIOUS TYPES INCLUDING CANNING, BEDS, CHARPOYS AND OTHER WOODEN FURNITURE (FD SERIES) AT BENGDUBI MIL STN
2019_MES_304758_2
GE/BENG/47 OF 2019-20
Open Tender
Coal Works
Item Rate
300 days
GE BENGDUBI
MES Enlisted/ Un-enlisted contractor of Class D and above with category d(i)
8 documents required · 8 mandatory
₹500
Yes
GE BENGDUBI
₹74,800
Yes
GE BENGDUBI
8 Jun 2020
30 Dec 2019
18 Jan 2020
30 Dec 2019
16 Jan 2020
7 Jan 2020
31 Dec 2019 - 3 Jan 2020
6 Jan 2020
Amount
SCHEDULE 'A'
Bed Hard (FD-246): M&L for provisioning and fixing of the following parts of bed hard including dismantling of damage parts and complete all as specified and shown in drawing :-
Head board along with both leg
Foot board along with both leg
Long Rail made out of teak wood
Short rail made of long rail obtain from item No 1(c) above
S&F End rail made of 2nd class Hard wood
Stiffener made of 2nd class Hard wood
Preparation of all exposed wood/wooden based surfaces of Bed (old/new) and apply two or more coats of french polish as required for proper shining to the entire satisfaction of Engineer- in- Charge.
Supply and fixing 12mm thick 7 Ply commercial BWR grade type BB (Single piece) fixed with screw as in Top of Bed.
Charpoy I P Hard (FD/MAP-II/01) : M&L for provision and fixing of the following Parts of Charpoy I P Hard including dismantling of damage parts and complete all as specified and shown in drg:-
Supply and Fixing 1930mmx850mmx12mm thick 7 ply commercial BWR grade type BB (Single piece) fixed with screw as in charpoy IP Hard .
Preparation of all exposed steel surface of Charpoy IP Hard (old/new) and apply two or more coats of synthetic enamel Black paint with one coat primer required for proper shining to the entire satisfaction of Engineer-in-Charge.
Charpoy G I Pipe 32mm Dia with Ply Top: (FD-220(R)) :
Removing of unserviceable existing Ply Top from G I Charpoy with Ply Top and Supply & Fixing 12mm thick 7 Ply BWR grade Plywood fixed with 10 Nos 4mm dia counter shank screw 65mm long nuts, bolts & washer complete all as specified and as directed.
Removing of existing unserviceable long rail and S&F new Long rail 32mm dia G I Pipe medium grade as shown in drawing duly threaded complete all as directed.
Removing of existing unserviceable short rail of G I Pipe 32mm dia and replacing with short rail obtained from long rail from 2(b) above which shall be reused as short rail after cut to size and threading complete all as directed.
Removing of existing unserviceable legs of G I Pipe 32mm dia and replacing with legs obtained from 2(c) short rail shall be reused as legs after cut to size and threading complete.
Removing of existing unserviceable/rusted M S flat 40mm x 6mm and fixing new M S flat strip of size 40mm x 6mm by welding on long rail of existing G I tubing as a supporting including drilling hole and fixing with nuts & bolts and painting to Black colour all as directed.
Table Dining 6/8 Person (FD-239): Removing of old worn out unserviceable following parts to Table Dining 6/8 persons without damaging any other parts and Supply & Fixing of new parts of appropriate size and shape/all as per drawing and as directed:- (Note:- Replacement/ Repaired components shall be Polished so as to matching with existing surface)
Leg made out of 60x60x740mm seasoned teak wood.
Top rail made out of 1400x100x25mm seasoned teak wood.
Top Rail made out of 640x100x25mm seasoned teak wood.
Top of Table Dining 8 persons made out of 1792mmx892mmx18mm thick commervial BWR Gde ply wood with 1 mm thick plastic laminated sheet to be pasted on top & 4 mm thick teak wood edging alround.
Top of Table Dining 6 persons made out of 1492mmx892mmx18mm thick commervial BWR Gde ply wood with 1 mm thick plastic laminated sheet to be pasted on top & 4 mm thick teak wood edging alround.
All exposed wooden surface shall be finished with french polished high gloss as per specified.
Table Dining (4 Person) Size 1200x900 x760mm (FD/MAP-II/ 03) : Removal of following unserviceable/broken wooden components Table Dining 4 Person w/o damaging other parts and S&F new components of well seasoned teak wood as per drawing:-
Top made out of plywood size 1200x900mmx18mm thick commervial BWR Gde ply wood with 1 mm thick plastic laminated sheet to be pasted on top & 4 mm thick teak wood edging alround.
Leg made of teak wood of size 90x45x750mm
Top rail (longer side) made out of teak wood of size 1200x90x50mm.
Top rail (shorter side) made out of teak wood of size 900x90x50mm
Removel of existing worn out/UNSV MS right angle and supply and fixing of new MS right angle of size 150mmx30mmx5mm thick screwed with rail and leg.
Stiffner made out of teak wood of size 900x90x30mm
Polishing to table dining 4 persons with two coats of french polish after necessary preparation of existing surface all as directed.
Table Dining OR's (FD-165(M)) : Removing following old worn out unsv parts of Table Dining OR's without damaging any other parts and S&F of new parts of appropriate size and shape all as per drawing and as directed:-
Legs (741mm)
Leg upto bottom stiffener
Foot Rest (1575mm)
Long side rail
Bottom/Top stiffener (490mm)
Rubber Shoe hard.
Removing of old wornout unserviceable top of Table Dining OR's and S&F new Top made out of 18mm thick commervial BWR Gde ply wood with 1 mm thick plastic laminated sheet to be pasted on top & 4 mm thick teak wood edging alround.
Preparation of surface of the frame of Table Dining OR's by scrapping and painting with two coats of black synthetic enamel paint all as directed.
Table 3'x2' (900x600x760mm) With Drawer (FD-283) :
Repairs to the following parts after taking out carefully unserviceable/damaged parts and replacing by new parts as per existing and all as shown in drawing including Polishing with Two coats of French Polish after necessary preparation of existing surface:-
Top made out of18mm thick commervial BWR Gde ply wood with 1 mm thick plastic laminated sheet to be pasted on top & 4 mm thick teak wood edging alround.
Legs made out of Teak Wood of size 65x65x740mm
Top Rail (longer side) made out of Teak wood.
Top rails (shorter side) made of Teak Wood
Drawer (Complete) made of Teak Wood and plywood as shown in drawing.
Table 3'x2' (900x600x760mm) Without Drawer (FD-42(M) FD-284) :
Repairs to the following parts after taking out carefully unserviceable/damaged parts and replacing by new parts as per existing and all as shown in drawing including Polishing with Two coats of French Polish after necessary preparation of existing surface:-
Top made out of 18mm thick commervial BWR Gde ply wood with 1 mm thick plastic laminated sheet to be pasted on top & 4 mm thick teak wood edging alround.
Legs made out of Teak Wood of size 65x65x740mm
Top Rail (longer side)
Top rails (shorter side)
Table 3'x3' (900x 900)x 760mm (FD-88M) :
Repairs to the following parts of table 3' x 3' after taking out carefully un serviceable/damaged parts and replacing by new parts as per existing and all as shown in drawing including Polishing with Two coats of French Polish after necessary preparation of existing surface:-
Leg made out of teak wood of size 65 x 65 x 740mm.
Top made out of 18mm thick commervial BWR Gde ply wood with 1 mm thick plastic laminated sheet to be pasted on top & 4 mm thick teak wood edging alround.
Side/Top Rail made out of 25 x 75mm teak wood.
Table Writing (FD-249 & FD-275) : Removing of following old wornout unserviceable parts of Table Writing without damaging any other parts and refixing with new parts of appropriate size and shape. All as per drawing and as directed:-
Top made out of 18mm thick commervial BWR Gde ply wood with 1 mm thick plastic laminated sheet to be pasted on top & 4 mm thick teak wood edging alround.
Leg (longer) 740mm long x 45x45mm made out of teak wood
Leg (shorert) 140x45x45mm made out of teak wood
Top Rail (Front & Back) made out of Teak wood
Side Rail (Top)
Stiffner (Longer)
Stiffner (Shorter)
Drawer with Lock & duplicate key
Shutter with Lock & duplicate key
Back Ply
All exposed wooden surface shall be finished with french polished high gloss as per specified.
Table Centre ( FD-274) :
Repairs to the following parts of Table Centre after removing old damaged parts and replace by new including polishing two coats of french olish (except table top).
Rear legs made out of teak wood of size 360x45x45mm
Front legs made out of teak wood
Side rail made out of teak wood size 380x50x25mm
Front & Rear rails made out of teak wood of size 60x50x25mm
Top of table centre of size 900x450mm of 18mm thick commervial BWR Gde ply wood with 1 mm thick plastic laminated sheet to be pasted on top & 4 mm thick teak wood edging alround.
Table Dining 6 Pers (FD/MAP-II/ 03) : Removal of following unserviceable/broken wooden components Table Dining 6 Person w/o damaging other parts and S&F new components of well seasoned teak wood as per drawing.
Top made out of plywood size 1500x900mmx18mm thick commervial BWR Gde ply wood with 1 mm thick plastic laminated sheet to be pasted on top & 4 mm thick teak wood edging alround.
Leg made of teak wood 90x45x750mm
Top rail (longer side) made out of teak wood of size 1500x90x50mm.
Top rail (shorter side) made out of teak wood of size 900x90x50mm
Stiffner made out of teak wood of size 900x90x30mm
Removel of existing worn out/UNSV MS right angle and supply and fixing of new MS right angle of size 150mmx30mmx5mm thick screwed with rail and leg.
Polishing to table dining 6 persons with two coats of french polish after necessary preparation of existing surface all as directed.
Table Dressing Ladies (FD-251) :
Repairs to the following parts of Table Dressing Ladies including Polishing with Two coats of French Polish after necessary preparation of existing surface.
Replacement of old unserviceable Mirror frame table dressing ladies and S & F new mirror of size 365mmx1220mmx5mm thick on wooden frame. (Make-Modiguard/Swastik /Atul)
Removing old unserviceable Backply of table dressing ladies and S & F new plywood of 6mm thick 5 Ply BWR Grade all as shown in drawing and as directed.
Replacement of unsv knob from drawer of table dressing ladies and S&F new knob aluminium anodised/PVC coated and all as shown in drawing and as directed.
Removing broken glass from shutter,Supply & Fixing new glass of size 5mm thick duly grinded for sliding clear glass all as shown in drawing and as directed.
Removing old unserviceable broken aluminium channel for shutter of table dressing ladies with mirror and Supply & Fixing new aluminium channel of required size all as shown in drawing and as directed.
Replacement of drawer made out of well seasoned teak wood all as shown in drawing.
Table Dressing Gents (FD-230) : Repairs to the following parts of Table Dressing Gents all as shown in drawing and as directed :-
Replacement of UNSV looking Mirror of size 760mmx380mmx5mm thick fixed on existing frame with 6mm thick commercial plywood backing as per drawing. (Make-Modiguard/Saintgobin/Swastik)
Removing UNSV top of table dressing gents and supply & fixing new top by using 18mm thick pre-laminated particle board with 4mm thick teak wood edging all round as shown on drawing
Removing UNSV back ply of table dressing Gents and supply & fixing new plywood 6mm thick 5 Ply BWR grade all as shown on drawing and as specified.
Removing UNSV bottom of table dressing gents and S&F new by using 18mm pre-laminated particle board with 4mm thick teak wood edging alround all as shown on drg.
Replacement of drawer made out of well seasoned teak wood all as shown on drg
Polishing to table dressing gents with two coats of french polish after necessary preparation of existing surface all as directed.
Table Dressing Ladies including Stool (FD/MAP-II/07) : Repairs to the following parts of table dressing ladies including stool as shown in drawing and as directed.
Replacement of unserviceable looking mirror of size 1210x420x5 mm thick fixed on existing frame.( Make-Modiguard /Swastik/Atul)
Supply and fixing foam cushion of size 410x300x75mm of 40 density with leatherite cloth (as per sample) for stool. (Make:Feather Foam/ Kurlon/ Sleepwell)
Polishing to wooden parts of table dressing ladies including stool with two coats of french polish after necessary preparation of existing surface all as directed.
Charpoy G I Pipe 32 MM Dia (FD-220) : Repair/Replacement of the following parts of Charpoy G I Pipe after taking out unserviceable :-
S&F Long rail 32mm dia G I Pipe medium grade of size as shown in drawing duly threaded complete all as directed
Short rail of G I Pipe 32mm dia (old G I Pipe obtained from long rail shall be reused as short rail after cut to size and threading complete.
Legs of G I Pipe 32mm dia (Old G I Pipe obtained from short rail shall be reused as legs after cut to size and threading complete)
Removing of unserviceable existing Nylon Newar from G I Charpoy and Supply & Fixing 12mm thick 7 Ply BWR grade Plywood fixed with 10 Nos 4mm dia counter shank screw 65mm long nuts,bolts & washer including 40 x 6mm MS flat 3 Nos fixed by welding at equal distance of long rail of existing G I Tubing as a support including holes for Nuts & Bolts. All as specified and as directed.
Chair Dining (FD-279) : Repair/Replacement of following defective wooden components Chair Dining w/o damaging other parts and S&F new components of well seasoned teak wood as per drawing.The wooden surface is prepared by scrapping with Sand paper and making the surface smooth and applying two coats of french polish so as to match with existing surface complete all as specified & directed:-
Front Leg of size 55mmx30mmx440mm
Rear Leg of size 55mmx30mmx880mm
Front Rail of size 30mmx65mmx380mm
Side Rail of size 30mmx65mmx320mm
Rear Rail of size 30mmx65mmx340mm
Back Rest of size 45mmx15mmx350mm
Stiffner of size 25mmx20mmx320mm
Side Stiffner of size 25mmx20mmx380mm
Material & labour for two coats of French polishing on all visual surfaces (internal & external as shown on drg) of Chair Dining including cleaning and preparing the surface of the articles of wooden furniture as specified and direct by Engr-in-Charge.
Chair Easy (FD-229) : Repair/Replacement of following defective wooden components Chair Easy w/o damaging other parts and S&F new components of well seasoned teak wood as per drawing. The wooden surface is prepared by scrapping with Sand paper and making the surface smooth and applying two coats of french polish so as to match with existing surface complete all as specified & directed.
Front Leg of size 50mmx25mmx510mm
Rear Leg of size 55mmx25mmx500mm
Front Rail of size 50mmx25mmx510mm
Rear Rail of size 50mmx25mmx480mm
Seat frame of size 510mmx480mmx575mm
Back frame of size 480mmx480mmx540mm
Arm of size 65mmx25mmx610mm
Material & labour for two coats of French polishing on all visual surfaces (internal & external as shown on drg) of Chair Easy including cleaning and preparing the surface of the articles of wooden furniture as specified and directed.
Chair Wooden bottom w/o Arm (FD-285) : Repair/Replacement of following defective wooden components Chair Easy w/o damaging other parts and S&F new components of well seasoned teak wood as per drawing. The wooden surface is prepared by scrapping with Sand paper and making the surface smooth and applying two coats of french polish so as to match with existing surface complete all as specified & directed.
Front Leg of size 30mmx55mmx455mm
Rear Leg of size 30mmx55mmx840mm
Side Rail of size 30mmx65mmx320mm
Front Rail of size 30mmx65mmx370mm
Rear Rail of size 30mmx65mmx340mm
Back Rest of size 50mmx15mmx340mm
Seat (made out of 6mm commercial BWR plywood IS-303)
Stiffner of size 20mmx25mmx380mm
Side Stiffner of size 20mmx25mmx320mm
Material & labour for two coats of French polishing on all visual surfaces (internal & external as shown on drg) of Chair Wooden Bottom w/o Arm including cleaning and preparing the surface of the articles of wooden furniture as specified and directed.
Chair Writing (FD-280) : Repair/Replacement of following defective wooden components Chair Writing w/o damaging other parts and S&F new components of well seasoned teak wood as per drawing.The wooden surface is prepared by scrapping with Sand paper and making the surface smooth and applying two coats of french polish so as to match with existing surface complete all as specified & directed:-
Front Leg of size 55mmx30mmx650mm
Rear Leg of size 55mmx30mmx890mm
Front Rail of size 30mmx65mmx470mm
Side Rail of size 30mmx65mmx360mm
Rear Rail of size 30mmx65mmx410mm
Arm of size 60mmx25mmx460mm
Stiffner of size 25mmx20mmx460mm
Side Stiffner of size 25mmx20mmx360mm
Back Rest of size 50mmx15mmx410mm
Material & labour for two coats of French polishing on all visual surfaces (internal & external as shown on drg) of Chair Writing including cleaning and preparing the surface of the articles of wooden furniture as specified and directed.
Recanning Chairs Removing old Plastic Cane of following Chairs and recanning with new 2mm Oval shape plastic cane with beading all around with 4mm Oval shape plastic cane Godrej pattern complete all as shown in drawing and as directed
Chair Dining FD-279
Chair Easy, FD-229
Chairs writing FD-280
Chair School with hand board (FD/E6/MAP/05) : Removal of following unserviceable /broken components Chair School with hand boad w/o damaging other parts and S&F new components of the following as per drawing:-
S & F one piece PVC Back and Seat as per drg.
S & F 18mm pre laminated particle board top openable with PVC edging screwed 25mm hole steel pipe inserted in 20mm MS rod welded to frame as per drg.
S & F new Busket below the seat shall be made of 7 Nos, 5mm dia mild steel rod made to shape as shown on drg.
Painting,removal of existing worn-out paint of frames and preparation of surface complete frame of Chair School with hand board and applying spraying 2 coats of synthetic enamel paint, Black paint by spray Gun for smooth & glossy finish.
Chair Dining Offrs (FD/MAP-II/04) : Replace the following parts of the Chair Dining Offrs as shown in drawing and directed
Front leg of size 35mmx50mmx380mm
Rear leg of size 35mmx50mmx380mm
Stiffner of size 25mmx20mmx410mm
Supply and fixing foam cushion of size 75mm x 455 x 415mm thick of 40 density with leatherite cloth (as per sample) for chair dining offrs cushion, (Make-Feather Foam/ Kurlon/Sleepwell)
Material & labour for two coats of French polishing on all visual surfaces (internal & external as shown on drg) of Chair Dining Offrs including cleaning and preparing the surface of the articles of wooden furniture as specified and directed.
Chair Dining Jco/ORs (FD/MAP-II/05) : Removal of following unserviceable /broken wooden components Chair Dining JCO/ORS w/o damaging other parts and S&F new components of well seasoned teak wood as per drawing:-
Front Leg of size 55mmx30mmx880mm
Rear Leg of size 30mmx55mmx440mm
Front Rail of size 30mmx65mmx380mm
Side Rail of size 30mmx65mmx320mm
Rear Rail of size 30mmx65mmx340mm
Back of size 45mmx15mmx350mm
Stiffner of size 20mmx25mmx380mm
Side Stiffner of size 20mmx25mmx320mm
Replacement of unserviceable PVC Seat of size 440mmx430mmx405mm and 4mm thick with hole and screwed with frame, 4x10mm thribs moulded alongwith seat in single piece weight not less than 0.500 Kg (Make : AMCO)
Material & labour for two coats of French polishing on all visual surfaces (internal & external as shown on drg) of Chair Dining JCO/ORs including cleaning and preparing the surface of the articles of wooden furniture as specified and directed.
Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 38265.00 (refer Tender Srl Page No 35). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’
MESSERS BEE GEE CONSTRUCTION
S K ENTERPRISE
M/S K M CONSTRUCTION
M/S NEO BUILDERS
M/S JANATA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .