Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
18 Aug 2026, 1:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
55
1 condition · 1 needing a document upload
The Railways reserves the right to order entire or bulk quantity from firms having satisfactory past performance for same or similar items as per clause no. 16.4 of General Tender Conditions. The firms need to upload copies of performance documents like R/Note, Receipted Challan, Inspection Certificate of the tendered/equivalent items failing which their offers are liable to be ignored. Only uploading of purchase order will not be considered as credential.
36 conditions
Authorisation: In case of authorized dealers, firm has to submit tender specific authorization/dealership from OEM along with the offer, otherwise their offer will be liable to be rejected.
Make/Brand: Maker's name [and/or Brand] must be mentioned in the offer. If no make is mentioned, it will be presumed that stores will be of OWN make.
Delivery Place :FOR SSE/MCTR (Dy.CME/Crane/JMP)
Marking: Manufacture name & date of manufacturing (month & year) should be pasted or marked/embossed on the product box/products without affecting the functional utility of the product. The material should be supplied in properly packed condition. Equivalent IS specification will also be applicable in place of DIN specification.
Guaranty/Warranty: As per Specification/drawing. If not mentioned in specification/drawing, it will be as per IRS conditions of contract.
Confirmation: You have gone through the Tender Documents consisting of Instructions to Tenderers, General Tender Conditions and Special Conditions of Tender, and you are agreed and confirm to abide by the Instructions to Tenderers, General Tender Conditions, IRS Conditions of Contract and the Special Conditions of Tender.
MSE: If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise(in percent of order value) with further breakup of MSE owned by SC/ST. (Information will be provided in % terms with 6 fileds; Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others)
PVC: PVC clause will not be applicable in this tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. Please refer to clause 28.0 for details.
Delivery from OEM's place: If you are dealer/authorized person, you are agreed to dispatch the stores directly from the manufacturer to the Railways consignee.
Proper address with PIN no of the Place of Inspection along with proof as per Tendered Condition must be mentioned
Valid UDYAM, specifically for Tendered Item must be submitted if applicable.
GST: (A) It shall be the responsibility of the Bidders to quote correct HSN Number and corresponding GST Rate, (B) The offer shall be evaluated based on the GST rate quoted by each bidder and same will be used for determining the inter-se-ranking. While submitting offer, it shall be the responsibility of the Bidder to ensure that they quote correct GST rate and HSN number, (C) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder, (D) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase Order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed, (E) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order, (F) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
MTC and MGC must be provided by the firm at the time of inspection as well as at the time of supply of materials.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Inspection by TPI against MTC & MGC. (If P.O value below 5 Lakhs then inspection by consignee else inspection by TPI. )
Inspection by TPI as per MTC & MGC. MTC & MGC should be submitted during delivery of the material at JMPW.
The materials should have the marking of the manufacturer's name & the batch (The month and the year of the manufacture).
These items are not available in GeM portal.
Material should be properly packed in original packing of OEM to avoid and damages during Transportation.
1 condition
Offer validity: Offer must be valid for minimum 90 days from the date of tender opening.
2 locations across Bihar · 80 Numbers · 30 Set total
Two way Pendent
55265046B
55265046B
Open - Indigenous
Goods
Patna, Bihar
₹0
Exempted
18 Aug 2026
21 Jul 2026
4 items · 80 Numbers · 30 Set total
Limit switch Oil tight and dust proof, die cast aluminum housing suitable for 415 Volts (or ab ove), 50 Hz, 10Amp (or above). AC supply for quick braking, spring loaded lever with roller 01 NO.+01 NC A uxiliary contact with normal angular lever as per ESSEN model type LSRS or BCH catalogue Code No.-LLGS. Mat specn. IS-2147/1962(or latest), IES: 60947-5-1, IP-65 or similar of make- BCH or L&T or Jeevan/Schineid er or SIEMENS or ESSEN. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 60.00 Numbers |
| Total | 60 Numbers | |
Two way Pendent type push button assly. with 2 Nos. of normally open inching type push but ton (indicated UP and DOWN button), suitable for 415V (or above), 10 Amp (or above), with cable entry arr angement through uPVC nipple as per SIEMENS model no.-3SB5802-8AC3 or similar of make- BCH or L&T o r Jeevan/Schineider or SIEMENS or ESSEN. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 20.00 Numbers |
| Total | 20 Numbers | |
1 set consisting of the following two items as in Sl No. A & B. Make: BCH or SIEMENS or Havel ls or Jeevan or SCHNEIDER or L&T or ABB. (A) Direct On-line Starter wall mounting type with Push Button C ontrol, suitable for 3 phase 50 HZ 415V for 30 HP Motor. The Contactor Coil of the Starter must be suitable for 415 V, 50 HZ, AC supply. The Starter shall be complete with overload and NO voltage protection. Maxim um dimension of the Starter should not excessed 280mm (B) X 430mm (L) X 175mm (T) irrespective of Di mension. Material specification: IS: 8544 (Part-1) IS: 13947- 4 - 1. Qty-1 No. (B) Supply & Fitment of Materia l for 30 HP DOL Starters (Master) in SL. No. (A) of 25T Universal JMP Jack (i) Red phase indicating LED Lamp 415V AC, Qty-1 No. (ii) Yellow phase indicating LED Lamp 415 V AC, Qty-1 No. (iii) Blue phase indicating LE D Lamp 415 V AC, Qty-1 No. (iv) On indicating LED Lamp 415V AC (Red), Qty-1 No. (v) Off indicating LED La mp 415V AC (Green), Qty-1 No. (vi) Trip indicating LED Lamp 415V AC (Amber), Qty-1 No. (vii) Emergency Push Button, Qty-1 No. (viii) 0-500V AC Analog Voltmeter, Qty-1 No. (ix) 3 Phase Voltmeter Selector Switch, Qty-1 No. (x) Single phasing, phase reversal/phase sequence protection Relay, Qty-1 No. (xi) Reset Button t o release overload relay in case of tripping, Qty-1 No. (xii) TB 30A 6 Way, Qty-1 No. (xiii) TB 30A 4 Way, Qty -1 No. & (xiv) 63 Amp. MCB Switch (fitted on outer panel) (1 set consisting of Sl No. i to xiv). (1 set consistin g of Sl No. A & B). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 10.00 Set |
| Total | 10 Set | |
1 set consisting of the following two items as in Sl No. A & B. Make: BCH or SIEMENS or Havel ls or Jeevan or SCHNEIDER or L&T or ABB. (A) Direct On-line Starter with 2 sets of 3 pole / 4 pole contactors (2 sets AC contactor coils, 25 AMP each), each set controlled separately by 415V, 50HZ AC Contactor Coils. One set of Contactor Coil is to be controlled by the forward direction of rotation through an Inching Type Pu sh Button and the other set through another Inching Button to control the reverse direction of 7.5 HP, 3 Pha se, 50HZ, 415Volts, AC Motor. There must be electrical interlocking contact to prevent both set of contactor s to close simultaneously. Each of above Push Buttons should have one normally closed auxiliary contact a nd one Stop Push Buttons are required. The starter shall be complete with over load, shall be wired and sh all be provided with Power Plug and Socket with locking arrangement as shown in schematic Drawing No. 1 736/23 and 1737/23 Alt.-1. Each Starter is to be provided with 2 Nos. Power Plug and Sockets and 2 Nos. of Control Plug and Sockets. Maximum dimension of the Starter should not excessed 280mm (B) X 430mm (L) X 175mm (T) irrespective of Dimension. Material Spec.: IS: 13947 Pt.-4 Sec.-1, 1993.. Qty. 1 no. (B) Supply & Fitment of Material for 7.5 HP DOL Starters (Individual) in SL No. (A) of 25T Universal JMP Jack. Sl No. (i) U p indicating LED Lamp 415V AC (Red), Qty-1 No. (ii) Down indicating LED Lamp 415V AC (Red), Qty-1 No. (ii i) Trip Indicating Lamp 415V AC (Amber), Qty-1 No. (iv) ) 415V AC 2NO+2NC FS-C 45MM Control Relay, Qty- 1 No. (v) 3 Phase (RYB) indicating LED Lamp, (vi) Reset Button to release overload relay in case of tripping, Qty-1 No. & (vii) 30A 3 way Terminal Block, Qty-2 Nos. (1 set consisting of Sl No. i to vii). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 20.00 Set |
| Total | 20 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5.JMPs-DRG.NO.1737-23-Alt.-1.pdf
ATTACHMENT
4.JMPs-DRG.NO.1736-23.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .