Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹44.4 L
EMD Value
₹88,900
Closing Date
22 Dec 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
12 conditions · 1 needing a document upload
The tenderer must submit a certificate in prescribed proforma at Pg 35- 36 of Tender Document
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
8 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document attached: Tender Document
If any discrepancy is found out at any stage between NIT and tender document, the conditions in the NIT shall prevail.
Provision of 02 Nos. Inspection/ Washing Pits with Track Lines in Parel Workshop
PR-EN-25-26-721A~CR
PR-EN-25-26-721A
Open
Works - General
6 Months
Mumbai, Maharashtra
₹0
₹88,900
22 Dec 2025
1 Dec 2025
8 Dec 2025
33 items across 7 schedules · ₹43,89,500.53 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | {DSR-21 ITEM CODE- 2.6.1} Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (All kinds of soil) | cum | 227.00 | 205.45 | 46,637.15 |
| 2 | {DSR-21 ITEM CODE- 4.1.2} Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level [1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)] | cum | 52.00 | 7,783.65 | 4,04,749.8 |
| 3 | {DSR-21 ITEM CODE- 4.1.6} Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level [1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)] | cum | 17.00 | 6,670.25 | 1,13,394.25 |
| 4 | {DSR-21 ITEM CODE- 5.33.1.1} Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. [All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cum] | cum | 140.00 | 8,683.8 | 12,15,732 |
| 5 | {DSR-21 ITEM CODE- 5.22.6} Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. [Thermo-Mechanically Treated bars of grade Fe-500D or more] | Kg | 11390.00 | 89.65 | 10,21,113.5 |
| 6 | {DSR-21 ITEM CODE- 5.9.1} FORM WORK: Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 342.00 | 307.95 | 1,05,318.9 |
| 7 | {DSR-21 ITEM CODE- 10.1} STEEL WORK: Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 100.00 | 93.05 | 9,305 |
| 8 | {DSR-21 ITEM CODE- 10.2} STEEL WORK: Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 938.00 | 111.95 | 1,05,009.1 |
| 9 | {DSR-21 ITEM CODE- 15.2.1} DISMANTLING AND DEMOLISHING: Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. [Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)] | cum | 60.00 | 2,007.1 | 1,20,426 |
| 10 | {DSR-21 ITEM CODE- 15.3} Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | cum | 24.00 | 2,928.1 | 70,274.4 |
| 11 | {DSR-21 ITEM CODE- 1.1.18} Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in- charge. | cum | 300.00 | 411.3 | 1,23,390 |
| 12 | {DSR-21 ITEM CODE- 15.19} Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. | Kg | 4690.00 | 3.2 | 15,008 |
| 13 | {DSR-21 ITEM CODE- 19.6.4} STONE WARE PIPES AND FITTINGS: Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe | MT | 30.00 | 902.05 | 27,061.5 |
| Schedule total | ₹33,77,419.6 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
721A.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .