WBPHED/AE_II/MLMD/NIeT_03 of 2025-26

Amount

Supply and delivery at site of following pumping machinery and electrical accrssories:

Submersible Pump directly coupled with water proof suitable size motor having following specification and as per NIT specification: Pump Shaft- Stainless Steel Impeller- S.S/GM Motor Submersible type 3 phase, 50 Hz, 415V ± 10% , 2900 RPM Motor must be suitable for operation with DOL starter Test Certificate along with characteristic curve shoule be submitted at the time of delivery.

Discharge of clear water = (Q) = 20 m3/hr. Total Head (H) = 65 M.

1.1 KV Grade 3 core water proof flat submersible cable for above motor.

Supply and delivery of the following valves, pipes, gauges etc. at site

65 mm dia M.S. seamless column pipe (black) 7.1 mm thick with 150 mm long heavy type socket at one end.

3.00 mtr. Long excluding socket having 8 T.P.I. thread.

1.5 mtr. Long excluding socket one end having a thread of 11 T.P.I. & the other end having a thread of 8 T.P.I.

Cast Iron Wafer type Three phase Actuator (Rotork range, three phase 415 V,multiturn electrically actuated) operated Butterfly Valve of dia 80mm (P.N-1.0) as per (IS-13095 IP-68) Test Certificates from both the manufacturer are to be submitted at the time of delivery

80mm dia CIDF Sluice Valve-1 no., Non Return Valve-1 no., CIDF 90° Bend-1no., CI Flanged Tee-1no. Blank Flange-1no., CI/ MS flanged Short Piece 0.50 mtr.-2 nos, CI/ MS flanged pipe 1 mtr.-2 nos. etc as per IS specification and certification for construction of delivery pipe line and wash out line.

Heavy type 200 mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry with 2 sets heavy type suspension clump, nuts, bolts and washer as per departmental design.

Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump. (This cost includes 15 mm. dia G.I. pipes and specials)

Pressure gauge (H.Guru/Febig) 150mm dia (0-7Kg/Sq.cm) brass cock and fitting complete. (This cost includes 15 mm. dia G.I. pipes and specials)

50 mm. dia. non metalic pipes (IS:14930) and specials for protection of submersible cable (as per site requirement)

Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials.

Installation of the materials (to be supplied under above sl no 1 to 4.10 ) such as Pump motor set with column pipes, valves, panel, fiting fixing pressure gauge, depth gauge, Non-return valve & drawing delivery out-let & washout line with the supplied specials / accessories by providing antisnapping cage of suitable size including supply of cable gland,sockets, wooden board, control cable etc including brick, sand, cement rod etc as required to complete the job as per direction and up to the entire satisfaction of the EIC.

Making brick pillar 0.25 mtr x 0.25 mtr. for supporting of valves and pipes with 12 mm thick plaster and net cement finish complete.

Supply,delivery of M.S Kiosk box of 661mm x 559 mm (LxW) Size having thickness of 1.5 mm with angle support at four legs having hight of 661 mm with provision of locking arrangement, supply of lock,cable entry point incl painting by one coat of black paint over one coat of primer all complete.

Making suitable size pump foundation including erection of Kiosk box with supplying of necessary cement, sand and stone chips including plastering and net cement finish complete.

Making double earthing arrangement in compliance with IE rules by G.I. pipe electrode of 50 mm. dia 3 mtr. Long 2 Nos for panel and pumping machinery 25 mm. x 6 mm. G.I. earth strips from earth pit to panel and all other accessories required to complete the work.

Making internal electrification of pump house consisting of two bracket point, one tube light point, two bulk head point, one fan point and 1 NO. 74 watt LED fixture with arm bracket at outside and one three pin plug point including supply of all necessary materials to complete the work as per IE rules and as per direction (All the fittings and lamp should be LED type as per choice of EIC)

Supply and delivery of PVC Moulded Chair.

Supply and delivery of PVC Moulded Table.

Supply, delivery & installation of the following Fan as directed by EIC. Ceiling Fan 1200mm sweep including Fan clamp as and when required.

Add GST @ 18%

Add Cess @ 1%

ANIMA ENTERPRISE (BID ID -6482657)

PABITRA MANDAL (BID ID -6482724)