REPAIR TO ELECTRIFICATION LT CABLE COOLING APPLIANCES GEYSERS AC VOLTAGE STABILIZER REPLACEMENT OF OLD UNSV UG CABLE GARDEN LIGHTS INCLUDING ITS CONNECTED REPAIR OF GICI PIPE SLUICE VALVES GATE VALVES REWINDING OF MOTOR AT HQ SFF CAMP

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out complete all as specified and directed by Engineer-in-Charge.

Returning, filling, including spreading levelling and well ramming in layers not exceeding 25cm apart complete all as specified and directed by Engineer-in-Charge.

Removing of surplus excavated soil to a distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushoning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches ccomplete all as specified and directed by Engineer-in-Charge.

M&L for sub class `B` bricks for cable protection all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate for coping for using extra cement for smooth finish incl form work complete all as specified and directed by Engineer-in-Charge.

Taking down/ out XLPE PVC insulated LT cable 1100 Volts grade from loose / hard soil / of any size all as specified and directed by Engineer-in-Charge.

Supplying, laying and testing XLPE cable, insulated screened PVC bedded galvanised steel strip or wire armoured LT 1100 volts grade (Heavy Duty) with stranded aluminium conducotr of cross secional area 95 Sqmm 3.5 core Engineer-in-Charge

Supplying, laying and testing XLPE cable, insulated screened PVC bedded galvanised steel strip or wire armoured LT 1100 volts grade (Heavy Duty) with stranded aluminium conducotr of cross secional area 25 Sqmm 4 core complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm dia of light grade GI pipe laid under road/floor/on pole for laying/fixing of cable complete all as specified and directed by Engineer-in-Charge.

M&L danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters figures and conventional skull and bones in signal red colour and fixed with MS clamps bolts and nuts of approved size for LT, 20x15 cm size all as specified and directed by Engineer-in-Charge.

Taking down old GI pipes 20 mm to 50 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fix steel water tubing 50mm dia bore. medium grade galvanized including all fitting such as tees, bends, elbows redness, unions, clamps etc ISI marked laid in trench complete all as specified and directed by Engr-in-Charge.

Supply and fix steel water tubing 20 mm dia bore. medium grade galvanized including all fitting such as tees, bends, elbows redness, unions, clamps etc ISI marked laid in trench complete all as specified and directed by Engr-in-Charge.

Supply and fixing Gun metal gate valves 50 mm dia bore. ISI marked cast copper alloy screwed down high pressure with crutch or butter handle screwed both ends for Iron pipe or union and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Gun metal gate valves 20 mm dia bore. ISI marked cast copper alloy screwed down high pressure with crutch or butter handle screwed both ends for Iron pipe or union and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in replacement sheet metal enclosures DB Double door type 8 way SPN 240 volt including 200 Amps rated bus bar with neutral link complete all as specified and directed by Engineer-in-Charge. . Make:Hager/Legrand/Schneider

M&L for bringing cable Fault locator at site for locating the fault in Exixing 11000 Volts HT cable as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed by Engineer-in-Charge.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators as per specified SSR and as directed by Engineer- in- Charge. NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls..

All as per item No 20 above but 5 Amp socket outlet, independent.

All as per item No 20 above but on the same board complete all as specified and directed by Engineer-in-Charge.

All as per item No 20 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable complete all as specified and directed by Engineer-in-Charge.

All as per item No 20 above but for one light point controlled by two, 2- way switch complete all as specified and directed by Engineer-in-Charge.

All as per item No 20 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of switch piano type 5 amp SP one way ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of switch 15 Amps SP one way ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of socket outlet 3 pin 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of socket outlet 2-in-1, 3 pin 5 amps and 15 amps flush type complete all as specified and directed by Engineer-in-Charge.

S&F in replacement for modular switches 6 amps single pole one way complete all as specified and directed by Engr-in-charge. Make : Philips cat No-913702314401 or equivalent

S&F in replacement for modular sockets out let 6 amps 6 pin 2 module with shutter complete all as specified and directedby Engr-in-charge. Make : Philips cat No-9137139114049 or equivalent

S&F in replacement for modular switches 16 Amps single pole one way complete all as specified and directed.by Engr-in-charge. Make : Philips cat No-913702314501 or equivalent

S&Fin replacement modular socket out let 6-16 Amps 3 pin combined shuttered complete all as specified and directed by Engr-in-charge. Make : Philips cat No-913702309901 or equivalent.

Supply & fixing in replacement of stepped type electronic fan regulator flush type on the existing phenolic sheet etc complete all as specified and directed by Engineer-in-Charge.Make : Anchor/Plaza/Havells.

Supply & fixing in replacement of bulb LED with B22 base 9 Watt pin type or holder type of warm white complete all as specified and directed by Engineer-in-Charge Make : Philips/Osram/Havells/Hallonix/Syska LED cat No-SSK- PA--9 Watt

Supply & fixing in replacement of ding dong bell electric 230 volt AC complete all as specified and directed by Engineer-in-Charge. Make Anchor

Supply & fixing in replacement of SPN enclosure with two pin and earth plug and socket complete with on SP MCB 20 Amps complete all as specified and directed by Engineer-in-Charge. Make:- Legrand/Havells/Indoasian.

M&L PVC insulated FRLS single core with strandard copper cable of size 6 Sqmm in two run and 4 Sqmm one run for earth and drawing through existing concealed conduit including taking down old UNSV cable all as specified and directed by Engr-in-charge. Make of cable:- Finolex/Havells/Plaza/Kalinga. NOTE :- 2 runs of 6 Sqmm cable and one run of 4 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

All as per item No 49 above here-in-before but copper cable single core of size 4 Sqmm in two run with earth wire 2.5 Sqmm single run for continuity all as specified and directed by Engr-In-charge. Make of cable:- Finolex/Havells/Plaza/Kalinga. NOTE :- 2 runs of 4 Sqmm cable and one run of 2.5 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

S&F sheet metal enclosures DB Double door Verticle distribution type, 04 way, TPN DB , IP43, 415V & suitable for 4 POLE MCCB as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer complete all as specified and directed by Engineer-in-Charge. . Make: Legrand(Lexic)/Hager/Schneider Note : - MCCB shall be measured and paid separately

S&F in replacement of MCCB TPN 125 Amps 415 Volts 16 KA as per suitable sample of size complete as specified and directed by Engineer –in-Charge. Make :- Legrand/Havells/Standard.

M&L for cable jinting kit for 11 KV (Earthed) grade cable for straight through heat shrinkable joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 70 Sqmm.

M&L for cable jinting kit for 11 KV (Earthed) grade cable for indoor termination heat shrinkable joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm complete all as specified and directed by Engineer-in-Charge.

M&L in repalcement of off load change over switch 415 V in sheet metal enclosure 4 pole of capacity 200 Amp , 415 Volts AC, 50 Hz (with side handle) complete all as specified directed by Engr-in-Charge. Make- Havells/C&S/HPL.

Supply & fixing in replacement of MCCB 63Amps 10KA complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Havells/L&T/Hagger/Indoasian.

Supply & fixing in replacement of MCCB 160 Amps 4 pole 36 KA 415 volts complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Havells/L&T/Hagger/Schnider/Indoasian.

Supply & fixing in replacement of MCCB 200 Amps 4 pole 36 KA 415 volts complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Havells/L&T/Hagger/Schnider/Indoasian.

Supply & fixing in replacement of MCB SP 6 t0 32 amps 230 Volt complete all as specified and directed by Engineer-in-Charge. Make:- Legrand/Indoasian/Havells/Indoasian/Schnider.

S&F in replacement of MCB SPN 32 Amps 230 Volts complete all as specified and directed by Engineer-in-Charge. Make:- Legrand/Indoasian/Havells/Schnider.

S&F in replacement of MCB SPN 40 Amps 230 Volts complete all as specified and directed by Engineer-in-Charge. Make:- Legrand/Indoasian/Havells./Schnider

S&F in replacement of MCB SPN 63 Amps 230 Volts complete all as specified and directed by Engineer-in-Charge. Make:- Legrand/Indoasian/Havells/Schnider.

S&F in replacement of MCB TPN 40 amps 415 Volt complete all as specified and directed by Engineer-in-Charge. Make:- Indoasian/Havells/Hagger/Legrand.

S&F in replacement of MCB TPN 63 Amps 415 Volt complete all as specified and directed by Engineer-in-Charge. Make:- Indoasian/Havells/Hagger/Legrand

S&F in replacement of MCB 4 pole 63 Amps 415 Volt complete all as specified and directed by Engineer-in-Charge. Make:- Indoasian/Havells/Hagger/Legrand

Supply and fix in replacement post top lantern LED 40 W or next highest wattage having IP65 protction for single phase connection 50 Hz 230 Volts complete all as specified and directed by Engineer-in-Charge.

S& fixing LED flood light luminarie 45 W with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection all as specified ad as directed by Engineer-in-cahrge at site.

Supply and Fixing LED street light fitting 45 Watt pressure die case aluminium housing LED street light luminaires suitable for existing street light pole including all fixing accessaries all as per specified and directed by Engineer-in-Charge. Make :Halonix cat No- HLSLD-09-45-CWL-E/Syska cat No-SLG-45W or equivlant .

S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x20 watt comprising of strong jointless CRCA body complete with all accessories complete all as directed by Engr-in-Charge. Make: Bajaj / Philips /Havells cat No-LHEWEBP7IN1W020

M&L for Recess mounted 40 Watt high efficancy 2x2 recess LED flat panel with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed by Engineer-in-Charge . Make Havells Cat Part No LHEWEBP6IN1W042/Halonix cat No-HLFPR-02-04-CW/Birla Power

Taking down ceiling fan of any sweep from existing place and repair/replacement of UNSV items all as specified and directed by Engr-In-Charge. Spare parts will be measured and paid separately.

M&L in replacement of defective shaft of ceiling fans including matching work for any make as per sample complete all as specified and directed by Engineer-in-Charge.

M&L in replacement of ball bearing for fans of various size all as specified and directed by Engr-in-Charge.

Supply and fixing and connecting flexible copper twisted twin core of size 23/.00076 complete all as specified and directed by Engineer-in-Charge.

M&L for painting of Ceiling Fan of size 1200mm” size complete in size with supper enameled synthetic paint by spraying including fitting cavities etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing capacitor 2.00 Mfd. in replacement of complete all as specified and directed by Engineer-in-Charge. :- Make ASIAN/SIEMENS/Havells.

Supply and fixing capacitor 2.5 Mfd. in replacement of complete all as specified and directed by Engineer-in-Charge.- Make ASIAN/SIEMENS/Havells.

M&L for rewinding of ceiling fan of any sweep with supper enameled coper wire of suitable size of any make/type/model including transportation and old material to be deposited in stores complete all as specified and directed by Engineer-in-Charge

Taking down exhaust fans of any size as per details given below and cleaning the dust properly. Oiling, greasing of ball and bearing including re-fixing and connecting of all as specified and directed by Enginer-in-Charge.

M&L for rewinding of exhaust fan 250 mm to 300 mm sweep with supper enameled coper wire of suitable size of any make/type/model including transportation and old material to be deposited in stores complete all as specified and directed by Engineer-in-Charge :-

Supply and fix ventilating fan in replacement plastic body of size 250 mm sweep with copper wire connection arrangenet complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of ball bearing of exhaust fan of any size complete all as specified and directed by Engineer-in-Charge.

Taking down carefully water heater storage type 25 ltrs capacity for repair and over hauling and opening to geysers and comprising of heating element thermo stat switch, electric connection cleaning and descaling with descaling solution the geysers tank and checking of leakage on pressure at 150 PSI and testing for smooth functioning complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of heating element 2.00 KW capacity 230 volt suitable for geysers any type as per site requirement ISI mark complete all as specified and directed by Engineer-in-Charge:-

All as per item no. 73 As above but 1.5 KW capacity 230 volt complete all as specified and directed by Engineer-in-Charge.

S&F in replacement thermostat switch connection any type suitable for geyser of any size/model complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of geyser assembly any make any type for 25 ltrs capacity water heater including replacement of rubber seal complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of indicator lamp (Pilot type)for 25 ltrs water heater complete all as specified and directed by Engineer-in-Charge. Make : As per ISI Marked.

Supply and fixing in replacement of PVC insulated copper conductor cable 4 Sqmm size 3 core grade (For Geyser) complete all as specified and directed by Engineer-in-Charge. Make: Kalinga/Plaza/Finolex.

S&F in replacement of water storage tank of suitable for 25ltrs capacity incl glass wool complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of bottom cover suitable cylindrical type geyser for 25 Ltrs capacity geyser complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of external surface of geyser body 25 ltrs rubbing the rusted surface and painting with two coats of spray paint with synthetic enamel paint over a coat of metal primer matching with existing colour complete all as specified and directed by Engineer-in-Charge.

Repair , servicing & preventive maintenance of split type AC's of capacity 1.5 TR comprising of the following tasks installed at different locations including refixing, commissioning and testing complete all as specified and directed by Engr-in-charge.

M/L charging of refrigerant to refrigerator up to required capacity as per site condition complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of starting capacitor 80-100/100-120 mfd for split type A/C's of capacity 1.5TR complete all as specified and directed by Engineer-in-Charge. Make-Telsa or ISI Marked.

S/F in replacement of running capacitor 30/36 mfd for split type AC unit as required at Site and as directed by Engineer-in-Charge.

Taking down desert cooler of any size by disconnecting electrical supply, cleaning, oiling of all moving part of pump & exhaust fan/kit, Replacing PVC pipes, nozzles, distributors, pads, checking electrical connections complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of wood pads(set of three)as per sample all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement the new desert cooler pump including testing for proper functioning all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement the new fan 450mm sweep for desert cooler all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement new body of desert cooler as per sample duly painted of 20 SWG sheet with 22 SWG flops, front grill, PVC pipe, nozzle, distributor and nut bolts washers for fixing fan clamps, complete all as specified and directed by Engineer-in-Charge.

Taking down and rewinding of fan 400mm of desert cooler with super enameled copper winding wire including replacement of bush complete all as specified and directed by Engineer-in-Charge.

Supply and fixing front grill PVC of desert cooler as per sample complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement plug top 15 Amps all as specified and directed by Engineer-in-Charge.

M&L Scrapping old paint and painting of desert cooler with two coats of red oxide(inside)and two coat of synthetic enamel paint(outside) all as specified and directed by Engineer-in-Charge

S&F in replacement PVC flexible copper wire 3 core of size 4 Sqmm complete all as specified and directed by Engineer-in-Charge.

S&F ceiling fan 1200mm sweep 5 star rated complete with all accesories with canopy set,down rod and flexible cable from cealing rose to fan complete all as specified and directed by Engineer-in-Charge.

Supply and filling transformer oil with breaking capacity 45 KV testing on load complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old steel surfaces and applying alternatively in yellow and black one coat of synthetic enamel black paint to steel tabular, pole upto 1 mtr height from ground level and remaining with two coats aluminium paint to LT pole including pedestral and numbering of pole with black paint complete all as specified and directed by Engr-in-Charge.

M&L for earthing with galvanised steel plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25mtr deep from ground level) surrounded from all directions with charcoal dust, salt and edge of earth plate not less than 1.5 mtr below ground level connected to galvanised iron strip 32mmx6mm earth lead by means of nuts, bolts and washers incl excavation and earth work PCC chamber and RCC cover of 1:2:4 type B-1 using XPM weighing not less than 4 Kg/Sqmm using 20mm graded stone aggregate for coping/under covers, 20mm size GI pipe light grade for watering funnel wire mesh etc, complete all as specified and directed by Engineer-in-Charge. and shown in electrical plate No-03 of SSR Part-I.

M&L, rewinding motor 5 HP 1400 RPM operating on 415 Volts, 3 phase 50 H AC supply for powering multi stage booster pump. The scope of work include dismantling of motor, cutting and removing the burnt winding cleaning the slots, rewinding with same size and turns of super enameled copper wire, taking out connections, tapping, varnishing backing and reassembling including replacement of UNSV parts such as nuts, bolts & washer etc inclduing testing on load complete all as specified and directed by Engineer-in-Charge.

Supply, installing, testing and commissioning factory made LT feeder pillar box outdoor type platform mounted, suitable for 415 volts 3.5 phase 4 wire, 50 Hz AC supply system all as specified and directed having bus bar installed on DMC/Epoxy insulators. The panel shall be dust and vermin proof, IP-65 class protection and made of 3.5.15 mm CRCA MS sheet with front and rear opening type with double door shutter and locking arrangement (including provn of lock with 2 keys), powder coated finish (over a coat of red oxide), primer on outside and two coats of red oxide primer on inside surface. The panel is including platform with PCC 1:4:8 type D-2 with 40mm crushed stone aggregate 20cm in thick in foundation and of height upto 0.5 mtr all as directed at site . All interconnections between the main bus bar as well as outgoing feeders shall be carried out with TPN Aluminium bus bar of rating not less than 1.5 times rated capacity of individual MCCB and should be insulated with shrinkable PVC sleeves. The MCCB should be adjustable type. The scope of work includes provision of following complete all as specified and directed by Engineer-in-Charge. Note: All MCCBs should have adjustable thermal and magnetic settings (i) MCCB 4 pole 25 kA 200 Amp with thermal settiing 80-100% - 01 No (For incoming). (ii) MCCB 4 pole 100 amps 16 kA - 02 Nos (iii) MCCB 4 pole 63 amps 16 kA - 03 Nos

All as per item No 101 as above with complete all as specified and directed by Engineer-in-Charge. (i) MCCB 4 pole 25 kA 125 Amp with thermal settiing 80-100% - 01 No (For incoming). (ii) MCCB 4 pole 63 amps 16 kA - 03 Nos (iii) MCB 4 pole amps 16 kA - 02 Nos

Saini Enterprises

M/S Ashoka Engineers and contractors

Shiv Shakti Builders

M/s Navansh Engineers & Consultants