CERTAIN REPAIR TO PLASTER JOINERY KITCHEN BATH WC TILING CHAJJA FLOORING AND SUNKEN TREATMENT AT BMH LINE ISHWAR NAGAR UNDER AGE BR II OF GE NORTH MEERUT CANTT

Amount

M&L for providing cement concrete 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 02 here-in-before but except bricks

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting exceeding 10cm girth but n.exc 20cm girth complete all as specified and directed.

M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-I as required superciaficial area exc150 sqcm but n.exc 400sqcm complete all as specified and directed.

S&F glazed, gauzed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F plain, framed, panelled shutters (any number of panels), of 2nd class Hardwood (HOLLOCK / CHAMP / SAL) 35mm thick with panels of timber flaton both sides (feather edges), or of veneered particle board medium density, wood particle board with commercial face veneers; and fitted to chowkats complete all as specified and directed.

M&L in repairs for 19 mm thick particle board, medium density, flat pre-ssed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame as in shelves cup board cabinets, in palmet boxed or similar items open edge of board fixed with Ist class HW wooden beading fitted with nuts & bolts comlete in repairs complete all as specified and directed.

S&F butt hinges of 100 mm size, Medium weight, cold rolled mild steel. complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down shutters of any description exc 1 but n exc 2 sqm each, including builders hard ware fittings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 156 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 160 of SSR Part-II complete all as specified and directed.

Supplied and fixed in repairs steel windows with pressed steel frame made out from 1.25 mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay , handles tower bolts lugs including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonry work complete all as specified and shown on drawings (Note : Disturbed surface of wall shall be made good to true surface)

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt having shoot / dia of bolt not less than 10mm complete all as specified and directed.

S&F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F 150mm size Mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F 1.00 mm th.mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); etc cut to size edges beads, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seams including bending turning up mitred engles, stopped ends, outlets, etc. as required complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions Note : There is no staircase to reach at the top of building

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions Note : There is no stair case to reach at the top of building and height of biulding is less than 10 mtr.

Supplied and fixed fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and as directed. Make : Everest, Charminar, UPAL.

M & L for laying joint free Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.18sqm but n.exc 0.38 sqm first quality coloured as in floors etc, set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item), complete all as specified and directed".

M & L for laying joint free Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.06sqm but n.exc 0.11 sqm first quality coloured as in floors etc, set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item), complete all as specified and directed".

M & L for light shade vitrified tiles 10mm thick (square / rectangular) area of each tile not exc 0.36 sqm as in floors etc, set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item) complete all as specified and directed".

All as per Srl item No 30 here-in-before but on vertical surfaces such as skirting / dados

M&L in repairs for 18-20 mm thick machine cut Kota stone slabs of size 540 mm x 540 to 560mmx 560mm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the stone slabs, including necessary grinding rubbing rounding to exposed edges and polising in granite finish complete all as specified and directed.

All as per Srl item No 32 here-in-before but on vertical surfaces such as skirting / dados

M&L for Glazed ceramic tiles coloured 300mmx 450mm X 7 mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item) complete all as specified and and directed

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for screed bed or bedding layer of 10mm thick in CM 1:4 to receive wall tiles complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from metal frames including punching or drilling out old glazed pins / spring clip and rubbish off the premises complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for cement plaster 15mm thick in cement mortar 1:3 in chajjas / beam etc with X PM if required to make up to original shape at any height complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling of brick or concrete surface, finished even & smooth W/O using extra cement all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on ceiling complete all as specified and direcrted.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying one coat of oil bound distemper, including petty repair with JK Birla wall care putty wherever required complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of cement base paint complete all as specified and directed

M&L for preparing of old decorated surfaces of wall ( plastered or un plastered ) including cornics etc and applying one coat of white wash complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparing of old plastered surface of wall incl repairs with wall care putty wherever required and apply one coat of exterior emulsion paint complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 in cm width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed .

M&L for preparation of new steel surfaces / completely rusted steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for welding in repair of loose joints of sliding doors, flat iron supports for velley gutters, windows, doors, northlight framing etc inc at any height & inc necessary cutting and grinding complete all as specified and directed

M&L for bitumastic gola, with 80/25 bitumenand coarse sand mixture 1:3 by weight 8cm x 8cm at the junction of roofing to vertical surfaces specified and directed

Taking up or down GI water tubing 15mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied, hoisted and fixed in in repair position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Supplied, hoisted and fixed in in repair position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms complete all as specified and directed.

S&F in repairs bib tap, C P cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repairs pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixed in repairs gun metal globe or gate valves, 15mm bore dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed in repairs gun metal globe valves or gate 20 mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied and fixed in repairs concealed PTMT stop cock heavy body 15mm bore dia with adjustable wall flange (minimum weight 15mm - 90gms) complete all as specified and directed.

S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 90gms/20mm-125gms) complete all as specified and directed.

S&F in repairs angular valve, 15mm bore dia, cast copper alloy, CP with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied and fixed 150mm bore dia UPVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, fixed to walls including clamps complete all as specified and directed.

Supplied and fixed 75mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches including clamps complete all as specified and directed.

S&F in repairs PVC connections fibre reinforced 15mm size of length 300mm with brass check nut & PVC washer complete all as specified and directed. complete all as specified and directed.

S&F in repairs PVC connections suitable for HOT Water 15mm size of length 300mm with brass check nut & PVC washer complete all as specified and directed. complete all as specified and directed.

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

Supply and fixing in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc including Plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling snap grid of false ceiling of any size any description complete all as specified and directed

Dismantling AC sheet corrugated or semi corrugated sheet of any description as in roof and including removal from the site complete all as specified and directed. Note : There is no staircase to reach at the top of building.

Dismantling of wall or ceiling board (fiber,pulp,insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling suspension system of size of grid 605x605 mm complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

All as per Srl item No 89 here-in-before but 40mm dia

S&F in repair FRP sheeting at north light curvers, roofs windows or at any other location by coach screw and washer, nut & bolt, staple pins or any other suitable means all as specified and directed by Engg-in-Charge Note : There is no staircase to reach at the top of building.

M&L in repairs for 1mm thick MS plain sheet for making modified lid of water tank and fixed with 04 nuts and bolts for water tanks for water capacity n.exc 750 ltr complete all as specified and directed

M&L for precast RCC 1:2:4 type B-1 (using 20mm aggregate) in mainholes covers and similar articles set in cement mortar 1:4 at site complete all as specified and directed

S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190gms) complete all as specified and directed.

Supplied and fixed in repairs MS CP grating 125 mm dia over floor / Nahni traps complete all as specified and directed.

Supplied and fixed in repairs CP waste coupling for kitchen sink of size 40mm and PVC waste pipe complete all as specified & directed.

Supplied and fixed in repairs CP waste coupling for WHB of size 32mm and PVC waste pipe complete all as specified & directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for

Demolition of RCC in floors(other than ground floors beams,chajjas,landing slab and similar suspended works all as specified and directed.

Manglam Engineers and Construction Co