CERTAIN REPAIR/ MAINT OF INTERNAL E/M AT FAZILKA MIL STN.

Amount

Taking down carefully existing copper/aluminium point wiring (light/fan/sockets/bell/power point) complete with all accessories such as switch with sheet, ceiling rose including rusted/broken concealed conduit, junction and sunken boxes etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20 mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers for paino type fittings and for 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches/ socket / regulator etc, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. (switch, socket, regulator shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.Note:- Modular base and cover plate for fixing of modular accessories supplied suitable for as per sch "B" items.

All as per Item No.2 above here in before but for One three pins 5 Amps switch socket outlet point on independent board with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

All as per Item No.2 above here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

All as per Item No.2 above here in before but for One light point controlled by two 2-way switches of 5 amps (switch shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

Description all as per item No.2 above here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

Description all as per item No.2 above here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate.

Supply only modular switch 5/6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Supply only modular switch 5/6Amps, single pole, two way (1 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Supply only modular Bell Push switch, 5Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Supply only modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Supply only modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Supply only modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

Supply only modular Fan regulator, single pole, one way complete all as specified and as directed by Engineer-in-charge. Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.

S & F switch piano one way 5/6 amps 240 volts complete all as specified and directed.

S & F switch piano one way 15 amps 240 volts complete all as specified and directed.

S & F Bell push AC, 50 Hz, 230 Volts, 5 amps complete all as specified.

S & F Bell ding dong AC, 230 Volts, Single pole complete all as specified.

S & F socket 5 in 1, 5 amps flush type complete all as specifeid.

S & F socket 5 in 1, 5/16 amps flush type complete all as specifeid.

S & F switch piano flush type 5 amps but 2 way type complete all as specified.

Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, .

M & L Ceiling rose, 3 terminals/phase type, fabricated of PVC/Polycarbonate, isolated body complete,

S&F of fan regulator step down electronic type heavy duly flush type 230 volts AC single phase fixed on laminated sheet top cover (laminated top cover is included in point wiring) and connecting up complete all as specified and directed. (Laminated sheet top cover and sunken box is included in point wiring).

M&L for submain wiring comprising single core ,2 Runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits heavy duty and conduit fittings/existing concealed conduit complete, including provision of 1 x 10 sqmm nominal cross sectional area multistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

Description all as per item No.25 above here in before but 2 Runs of 6 sqmm complete in PVC conduits/ complete all as specified.

Description all as per item No.25 above here in before but 2 Runs of 4 sqmm in PVC conduit and its fittings complete all as specified and directed by Engr-In-charge.

M & L cutting chases, pinning in, making god to facings where reuired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed wiring etc, and making good, cutting not exc 10 cm girth in brick walls complete all as directed by Engr-in-charge .

Supply, laying, fixing or passing through pipe, 1100 volts grade heavy duty cable of size 2 core 10 sqmm nominal cross section in service connections of PVC insulated aluminium multi standard conductor served with an inner sheathing of PVC tape and overall PVC sheathed complete all as specified and directed by Engr-In-charge.

All as per Item No.29 above here-in-before but 2 core 6 sqmm complete all as specified and directed.

Supply and fixing MCCB TPN ( 4 pole) 63 Amps 415 Volts of braking capacity 16 KA complete taking down old unserviceable one and making necessary connections as existing ls with CTC solutions complete all as specified and directed.

All as per Ser Item No.31 above here-in-before but 100 Amps with braking capacity 16 KA.

All as per Ser Item No.31 above here-in-before but 125 Amps with braking capacity 16 KA.

S&F sheet metal enclouser VTPN/HTPN DB having facility to fix MCCB incomer upto 125 Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-43 protection Isolated Neutral bar,door earthing,cement spill protector,insulated bus bar assembly and blanking plates including making good disturbed surfaces after taking out old unserviceable DB complete all as specified and directed.

All as per Item No.191 above here-in-before but TPN DB 8 Way double door type complete all as specified and directed.

Dismantling of existisng unserviceable MCB distribution board and S&F in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.Note :- MCB’s shall be measured and paid separately under appropriate item of BOQ.

Dismantling of existisng unserviceable MCB distribution board and S&F in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 12 Way 240V, suitable for mounting MCB/Isolator, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.Note :- MCB’s shall be measured and paid separately under appropriate item of BOQ.

Dismantling of existisng unserviceable DBs and S&F single door SPN DB 2 way having facility to fix MCB DP/SPN 2 ways complete fitted with bus bars, neutral links including provision of MCB DP 6-16A and including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and directed.

S&F 1.5 sqmm 3 core, 1100 volt grade heavy duty cable, PVC insulated copper multistranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed for making connection Of bldg street lights/fan/garden lights complete all as specified and directed

labour only LED tube light/Building light/ bulk head/ ceiling light etc of any type and make including electric connection with PVC copper flexible twin core cable, 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Note : LED Tube Lights shall be issued from MES Store under schedule 'B" and unserviceable tube lights to be deposited with AGE E/M store.

S&F Post top lantern Light of 30 Watt capacity made of housing epoxy powder coated pressure die cast aluminium spigot and lid cover with graphite grey finish and clear acrylic cover, IP65 protction with suitable mounting GI pipe upto 1.0m and PCC grouting complete all as specified and directed.

Supply and fixing complete set of 1x10 watt LED retrofit type bulkhead fitting luminaries die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old Unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge.

Supply and fix LT Main control board of CRCA sheet metal board made out of 2.0mm thick and painting with 2 coats with synthetic enemel paint over a coat of red oxide primer including copper bus bar and fixed on/inside wall for fixing arrangement of existing electronic meter incl internal connection with suitable size of copper conductor wire, and accessories, locking arrangement with opening handle (size not less than of box 100cmx80cmx25cm and adequate depth for the following equipments,internal wiring and termination of external cables, lugs and glands and conduit as required) including Taking down existing Old Unserviceable main control board comprising of following :- (a) Incoming :- MCCB 100 Amps, 4 Pole,415 Volts, 16 KA-01 No (b) Copper Bus bar 200 Amps for phase and neutral and earth bar (c) Out going MCB SPN 40 Amps - 4 Nos (d) Out going MCB SPN 10 Amps - 1 No

Demolishing the earth pit chamber and constructing new earth pit chamber brick work in cm 1:4, plastering cm 1:3 and PCC chamber cover only complete as per SSR Pt-I of 1996 including new wire mesh funnel all as directed

Material and labour for 2mm thick galvanised steel presses sunken box suitable for both paino type fitting and modular switch socket (min 60 mm deep, suitable length) grouted flush to walls and necessary cement work of cm 1:4 and applying putty around 3mm thick switch board to match with existing surface and provision of suitable hylem sheet of 3mm thick (ISI Marked) fitted with Chromium plated brass screws & washers for paino type fittings and for 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches/ socket / regulator etc. Fixing existing serviceable modular/panio type switch, socket, regulator for any type of concealed point wiring complete all as specified and directed. Note: 1. Replacing Old unserviceble switch, socket regulator if any with new is measurable in sepearte items 2. Modular base and cover plate for fixing of modular accessories supplied suitable for as per sch "B" items.

Earthing complete with galvanised steel earth plate electroe 60 cmx60cm6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connectedto and including galvanized earth lead GI Strip of size 32x6mm by means of GI bolt/snuts/washers, protected by 40mm bore GI light grade pipe from earth plate & upto 3m long pole fixed with 2 clamp made from mild steel flat iron 32x6mm bolts, nuts, washer etc. earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15cm thick all around buttom and top of earth plate 20mm dia GI Medium grade pipe for watering and including funnel, wire mesh, RCC cover & frame PCC 1:3:6 type C1 using 20mm graded stone aggregate as in earthing pit including necessary excavation & earth work all as specified & shown on electrical plate No. 3 of SSR Part-I, (Note: (i) PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner (ii) earthing for Lightning protection is also included in the above item)

Supply and fixing LED luminaire 600 mm x 600 mm,36 watt, 220 V AC surface type with high efficiency PMMA diffuser soft glare free light complete with driver suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.Make :Bajaj/ Havells/Phillips/Wipro as recommended by Engr-Incharge and approved by GE.

Supply and fixing warm LED luminaire 600 mm x 600 mm,36 watt, 220 V AC surface type with high efficiency PMMA diffuser soft glare free light complete with driver suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.Make :Bajaj/ Havells/Phillips/Wipro as recommended by Engr-Incharge and approved by GE.

S&F and testing of warm LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin.

M&L for ceiling light fitting of skylux LED efficient LED surface round type luminaire & galre free soft illumination of capacity 15 watt LED white/warm coliur complete suitable for roof ceiling including connecting upto with driver 3 core flexible conductor copper of suitable size complete all asspecified anddirectedby Engrin-charge

S&F and testing of warm decorative LED light 1x9 watt metal body with glass shade material, flush mount including wrrm white E27 bulb with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes. Total input voltage range 140-280V AC, complete all as specified and directed by Engineer-in-Charge.

M&L for ceiling light fitting of skylux LED efficient LED surface square type luminaire & galre free soft illumination of capacity 15 watt LED white/warm colour complete suitable for roof ceiling including connecting upto with driver 3 core flexible conductor copper of suitable size complete all asspecified anddirectedby Engrin-charge

M&L for ceiling light fitting of skylux LED efficient LED surface round type luminaire & galre free soft illumination of capacity 36 watt LED white/warm coliur complete suitable for roof ceiling including connecting upto with driver 3 core flexible conductor copper of suitable size complete all asspecified anddirectedby Engrin-charge

Taking down ceiling fan of 1200/1400 mm sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, servicing/overhauling and replacement of bush, bearing, condenser complete all as specified and directed and writing MES number as as directed by Engr-in-Charge. (Note :1. Bush, condensor, ball bearing are measured and paid separately as supply only rates and minor spares like , rubber bush shackle,holder deemed to be include in quoted rates ) 2.pair/Servicing of fan shall be carried out in MES yard/User site to bring adequate serviceable condition winding machine,tools & plants and necessary motor winder at site as directed.

Supply and fixing Wall mounting fans complete with 3 blades and accessories, 230 V, 400 mm sweep. Five star rated with brushless direct current motor (BLDC) as specified and recommended by manufacturer all as specified and directed by Engineer in Charge Make : Bajaj/Orient/Crompton, Havells and its equivalent.

Supply and fixing Pedestal fans complete with 3 blades incl remote control and accessories, 230 V, 400 mm sweep. Five star rated with brushless direct current motor (BLDC) as specified and recommended by manufacturer all as specified and directed by Engineer in Charge Make : Bajaj/Orient/Crompton, Havells and its equivalent.

Supply and fixing in replacement of PCB (Panel circuit board) suitable for BLDC ceiling fan of 1200 mm sweep ISI marked duly housing in side ceiling fan body after taking down and fixing the ceiling fan after serviceble position complete all as specified and directed.

Supply only exhaust fan Louvers MS suitable to size as per exising fans 220/250/300/380/450 mm complete all as specified and directed

S&F for exhaust fan MS frame with nuts and bolts suitable for 230/250/300/450 mm sweep suitable for existing make & type as per sample complete all as spd and dir.

S&F for exhaust fan MS legs set of four and clamp with nuts and bolts suitable for 230/250/300/450 mm sweep suitable for existing make & type as per sample complete all as spd and dir.

Labour only for fixing Modular switch 6 amp issued vide sch "B" and unserviceable items of the same to be deposited with AGE E/M store as directed by Engr-in- Charge.

Labour only for fixing Modular switch 6/16 amp issued vide sch "B" and unserviceable items of the same to be deposited with AGE E/M store as directed by Engr-in- Charge.

Labour only for fixing Modular socket 6 amp issued vide sch "B" and unserviceable items of the same to be deposited with AGE E/M store as directed by Engr-in- Charge.

Labour only for fixing Modular socket 6/16 amp issued vide sch "B" and unserviceable items of the same to be deposited with AGE E/M store as directed by Engr-in- Charge.

Labour only for fixing Exhaust fan issued vide sch "B"and unserviceable items of the same to be deposited with AGE E/M store as directed by Engr-in- Charge.

Labour only for fixing Modular fan regulator issued vide sch "B"and unserviceable items of the same to be deposited with AGE E/M store as directed by Engr-in- Charge.

Labour only for fixing switch socket combination 6/16 amp issued vide sch "B"and unserviceable items of the same to be deposited with AGE E/M store as directed by Engr-in- Charge.

Labour only for fixing switch socket combination 6 amp issued vide sch "B"and unserviceable items of the same to be deposited with AGE E/M store as directed by Engr-in- Charge.

RUCHIKA CONSTRUCTIONS (BID ID -3320386)