Construction of wall and Railling to Increase Existing wall Height at RP Colony Marriage Hall Compound Jaisalmer

Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto two stories.

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush/ Ruled pointing .

Providing and laying damp-proof course with cement concrete grade M-15 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . 50mm thick.

Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approvedsteel rimer using structural steel etc. as equired In ngs, frames, guard bar, ladder, railings, brackets, gates andsimilar works.

4.2 Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and crosssections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 30 In all type of soil.

9.3 Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in concrete mixer, laid manually, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.

Providing & laying interlocking terrzo cloured block plastic moulded.80 mm thickness having min. crushing strangth 40 N/mm2 laid over 40 mm thick river sand bed complete as per drawing and approved by Engineer In Charge , Complete with all respect . 709.00 P.Sqm.

Painting two coats on specified surface with synthetic enamel paintof approved brand and shade, after thorough cleaning andnecessary filling to give even shade as per clause 803 of MoRT&HSpecification including all material, labour. On steel surface