Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.8 CrAccepted-AOC 86 NARROTTAM KUNJ MADHU NAGAR AGRA 282001 | AGRA | UTTAR PRADESH | 282001 | ₹14.8 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹16.3 CrRejected-AOC | ₹16.3 Cr | L2 | Rejected-AOC L2 |
| 3 | L3₹17.3 CrRejected-AOC H G 2253 THNB AVADI CHENNAI 54 | CHENNAI | THIRUVALLUR | TAMIL NADU | 600054 | ₹17.3 Cr | L3 | Rejected-AOC L3 |
| 4 | Not Admitted-Fee/PreQual/Technical 7 2ND FLOOR CHENGALVARAYAN STREET SHENOY NAGAR CHENNAI 600 030 | CHENNAI | TAMIL NADU | 600030 | - | - | Not Admitted-Fee/PreQual/Technical Others-Not Qualified the eligibility conditions mentioned in pre-qualification criteria |
Tender Value
₹15.2 Cr
EMD Value
₹15.2 L
Closing Date
12 Jun 2023, 3:00 pmClosed
SUPERINTENDING ENGINEER SPECIAL PROJECTS DEPARTMEN
OFFICE OF THE SUPERINTENDING ENGINEER SPECIAL PROJECTS DEPARTMENT AMMA MALIGAI D WING 5TH FLOOR
CONSTRUCTION OF PEDESTRIAN PLAZA ALONG KHADER NAWAZ KHAN ROAD IN DN NO 111 ZONE IX UNDER MEGA STREETS PROJECTS
2023_CoC_308265_2
S.P.D.C.NO.B1/0866/2022
Open Tender
Civil Works
540 days
CHENNAI
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹15.2 L
OFFICE OF THE SUPERINTENDING ENGINEER SPECIAL PROJ
23 Aug 2023
3 May 2023
13 Jun 2023
3 May 2023
12 Jun 2023
12 May 2023
4 May 2023
Dismantling R.C.C.works, carefully clearing away the debris as directed during execution.
Dismantling the existing brick or stone masonry work in cement mortar under 3m high including carefully clearing the debris etc.,complete.
Removing C.C Slab Clearing Away And Stacking The Same For Reuse
Removing Cement Concrete Kerbs Clearing Away And Stacking The Same For Reuse
Labour For Disconnection Of Cable And Removal Of 8 / 9 Mtr. Lamp Post Including Bracket & Fitting ( Anchor Bolt Type Foudation Type )
Dismantling plain cement concrete work and clearing the debris etc., complete.
Providing Iron Barricading of size 2m width and 1 m height with 40mm dia MS Tubular pipe for vertical supports on both sides and three lines of barricading with 25mm size MS tubular pipe and 2 x 1m M.S. Sheet with name board of size 0.60 x 0.45 m size M.S.sheet (20 gauge) including Cutting, Welding, fabrication charges and one coat of primer and 2 coats of enamel paint of approved quality with fixing of indication with reflecting stickers and necessary interlocking arrangements with adjoining units and placing the barricading units as directed at the site for a period of 28 days. The M.S. Sheet barricading is a temproray barricading and can be removed and reused after the completion of work in a particular stretch.
Earth work excavation for foundation in all kinds of soils in varying depths including dismantling any masonry or roots met with in foundation shoring with planks and baling water if necessary clearing levelling the site etc. complete with initial lead of 10m and a lift of 2m
Cutting bituminous concrete / Cement concrete surface of 300mm thick and width of 300mm using machies (Jack Hammer) including hirecharges of machies and labour charges etc. complete.
Cold Milling of Existing Asphalt surface to the required depth using milling machine including hire and running charges for the machine cleaning the milled surface as to avoid slippery including all other incidential charges and other unforeseen charges etc. complete
Carting away the surplus earth/debris to a lead of 12km.including Loading, unloading and dumping in the Corporation Land as directed during execution
Providing Tack Coat 2.5 kg/10 m2 with Bitumen Emulsion (Rapid Setting 1)including cost of bitumen at the site, including labour charges for preparing the surface and applying required quantity of bitumen emulsion as Tack Coat using bitumen sprayer etc., complete over the primed surface as per clause 503 of MoRT& H SpecificationsRev.5 (This rate is applicable only if the Work is carried out during NIGHT)
Providing And Laying Bituminous Concrete 40mm Thick Using 0.2089 Cu.m of 13.2-10mm Metal 0.1372 Cu.m of 10-5mm Metal 0.2387 Cu.m of 5mm And Below Metal of Specified Grading Aggregates And 0.012 Cu.m of Quarry Dust With 50.3 Kg of Vg30 (60/70 Grade) Bitumen For Premixing Per 10Sq.m Including Cost And Conveyance of All Materials To cmp Site Heating The Bitumen And Aggregate To Required Temperature And Mixing Them In Required Temperature In Central Hot Mix Plant 20-30 Ton Capacity Conveying The Mix By Tipper Trucks To Work Site Spreading The Mix To Uniform Thickness of 40mm With 9M Paver Finisher To The Specified Grades And Cross Sections And Consolidated By 8-10 Tone Vibrator/Pneumatic Roller To The Required Density Etc. Including Labour For Attending To Paver To Site Etcm Including Hire Charges And Fuel Charges For 20-30 Tonne cmp With Bitumen Boiler Tipper Trucks 9M Paver Finisher Vibrator/Pneumatic Roller And All Other Tools And Plant Required Including Fuel And All Other Incidental Charges Etc. Complete As Per Specification Using cmp As Per Clause 507 of Morth Rev-5. (This Rate Is Applicable Only If The Work Is Carried Out During Night And If It Is Laid By 9M Paver Finisher).
Providing And Fixing Machine Dressed Grey Granite Slab All Sides Machine Cut of Size 0.60 M X 0.60 M Size And 50 mm Thick Granite Slabs For latform(Pavement) Including Cost AndConveyance of Granite From Available Source Including Labour Charges For Fixing The SlabIn Position To The Line Level And Gradient Including Pointing With cm.1:3 And All OtherIncidental Charges Etc. Complete
Supplying And Fixing of Rubber Moulded Grey Premium Concrete Pavers of Size 200X200X65mm Using M30 Concrete Placed Over 50mm Thick Crushed Stone Sand (M Sand). The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Filling of All Joints With Labour Charges Etc.
Providing And Fixing All Side Machine Cut Granite Stone Kerbs Using 0.30M Height 0.100M Thick And 0.6M Length Granite Stone Kerb Without Fragmentation For Platform Kerbs Including Cost And Conveyance of Granite Kerb From Available Source To Work Site Including Labour Charges For Fixing The Granite And Pointing With cm. 1:3 And All Other Incidental Charges Etc. Complete
Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining Etc Complete .
Providing and laying precast saucer type drain of size 600x300 x 50mm with M30 GRADE concrete including the Cutting of the existing bituminous surface of 10 cm thicckness and PCC of 1:3:6 for leveling and maintain the gradient to drain the water from road to Storm water Drain etc and complete
Providing and laying in position ,Standardised Concrete Mix M-20 Grade in accordance with IS :456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and m,aximum water cement ration of 0.55, including admixture (Plasticiser/Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the excess usage of materials) (If pumping of Concrete is required).
Providing and laying in position ,Standardised Concrete Mix M-30 Grade in accordance with IS :456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and m,aximum water cement ration of 0.45, including admixture (Plasticiser/Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, nutexcluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators ,finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the excess usage of materials) (If pumping of Concrete is required).
Providing And Laying In Position, Standardised Concreto Mix M-40 Grade In Accordance With 15:456-2000, Using 20mm And Down Graded Hard Broken Granite Stone Jelly For Oll Rcc Items of Works With Minlinum Cement Content of 440 Kg/M3 And Maximum Woler Cement Ratio of 0.10, Including Udmixture (Plasticiser / Super Plasticser) .In Recommended. Proportions As Per Is:9103. to accelerata, Retard Setting of Concrete, Improve Workability Without Impairing Strength And Durability With About (5.0 Cu.m.) 7730 Kg. of 20mm Michine Crushed Stone Jolly And With About (3.3 Cu, M.) 5136 Kg. of 10-12mm Machine Crushed Stone Jelly And With About (4.79 Cu.m.) 7670 Kg. of Crushed Stone Sand (M Sand), But Excluding Cost of Renforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing and including pumping charges Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor/ Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements of Is Standards. (No Separate Payment Will Bemade By The Department For The Excess Tisdae of Materials) (If pumping of Concrete is required).
Supplying and erecting in position LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification. The trusses shall be procured only from reputed manufactures of trusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design. The rate quoted shall include the cost of trusses. Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red-oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc., The roof sheeting shall project 0.762m from the eves purlins. For structures like CYCLE STAND, PARKING GARAGE, TEMPORARY ENCLOSERS
Providing And Fixing Reflective Road Studs of Category a Raised Pavement Markers Made Out of Poly Carbonate / Methyl Methecrylate /Abs Moulded Body Conforming to astm D 788 And Reflective Panels With Micro Prismatic Lens Capable of Providing Total Internal Reflection of The Light Entering The Lens Face With Retro Reflectance And Chromaticity Values Conforming to astm D4280. The Reflective Raised Pavement Markers Shall Also Confirm To The Morth Circular No Rw/Nh. 33023/10/97- Do.Iii Dt 11.06.97. The Height, Width And Length Shall Not Be Less Than 15mm, 90mm And 100mm And With Minimum Reflection Area of 13 Sq.m On Each Side And The Slope To The Base Shall Be 35+/-5Degree Each Reflectors Shall Have A Cil Not Less Than Values Specified In Table 2 of Said Morth Circular. The Strength of Deteachment of The Integrated Cylindrical Shanks, (of Diameter Not Less Than 19+/-2mm And Height Not Less Than 30+/-2mm) From The Body Is To Be A Minimum Value of 500Kgf. Fixing Will Be By Drilling Holes On The Road For The Shanks to Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturer’S Recommendation And Complete As Directed By The Engineer.The Marker Shall Support a Load of 13635Kg Tested In Accordance With Astm D4280 And Confirming to Irc 35-2015 Guidelines And .2 Year Manufacturers Warranty For The Satisfactory Field Performance To Be Submitted To The Engineer Incharge For Payment Processs As Mort&H Specification 804 Etc., Complete
Providing And Laying of Hot Applied Thermoplastic Compound 2.5 mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness of 2.5 mm Is Exclusive of Surface Applied Glass Beads As Per Irc:35 The Finished Surface To Be Level Uniform And Free From Streaks And Holes Etc Completed As Per Mort& H Specification No.803
Providing And Fixing of Retro Refelctorised Cautionary, 90 cm Equilateral Triangle Mandatory And Informatory Signs (With Definition Board) Made Out of High Intensity Prismatic Grade Sheeting Conforming To Type – Iv Standards of Irc 67 : 2012 And Astm D 4956 – 09, Specification And Fixed Over 2mm Thick Aluminium Sheet Fixed Over a Back Supporting Frame of 25mm X 25mmx3mm. Mild Steel Angel And Supported On A Mild Steel Angel Post 75X75X6mm With A Clear Height of Not Less Than 2.10M From The Ground Level To The Bottom of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67-2012 And Firmly Fixed to The Ground By Means of Properly Designed Foundation With M15 Grade Cement Concrete 45cmx45cmx60cm Size Including Cost And Conveyance of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. High Intensity Retro – Reflection Sheet Shall Consist of Minimum Coefficient of Retro-Reflection As Per Table 6.6 of Irc 67-2012. The Retro Reflection Sheeting Shall Be Covered Under 7 Years Warranty Issued For Field Performance And A Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67:2012 (As Per Mort&H Specification No.801)
Providing And Fixing of Retro Refelctorised Cautionary ,60 cm Circular Mandatory And Informatory Signs (With Definition Board) Made Out of High Intensity Prismatic Grade Sheeting Conforming To Type – Iv Standards of Irc 67: 2012 And Astm D 4956 – 09, Specification And Fixed Over 2mm Thick Aluminium Sheet Fixed Over A Back Supporting Frame of 25mm X 25mmx3mm. Mild Steel Angel And Supported on a Mild Steel Angel Post 75X75X6mm With A Clear Height of Not Less Than 2.10M From The Ground Level to The Bottom of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67- 2012 And Firmly Fixed To The Ground By Means of Properly Designed Foundation With M15 Grade Cement Concrete 45mmx45cmx60cm Size Including Cost And Conveyance of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. High Intensity Retro – Reflection Sheet Shall Consist of Minimum Coefficient of Retro-Reflection As Per Table 6.6 of Irc 67-2012. The Retro Reflection Sheeting Shall Be Covered Under 7 Years Warranty Issued For Field Performance And a Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67:2012 (As Per Mort&H Specification No.801)
Providing And Fixing of Retro Refelctorised Cautionary, 80 cm X 60 cm Rectangular Mandatory And Informatory Signs (With Definition Board) Made Out of High Intensity Prismatic Grade Sheeting Conforming To Type – Iv Standards of Irc 67 :2012 And Astm D 4956 – 09, Specification And Fixed Over 2mm Thick Aluminium Sheet Fixed Over A Back Supporting Frame of 25mm X 25mmx3mm. Mild Steel Angel And Supported On A Mild Steel Angel Post 75X75X6mm With A Clear Height of Not Less Than 2.10M From The Ground Level To The Bottom of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67- 2012 And Firmly Fixed To The Ground By Means of Properly Designed Foundation With M15 Grade Cement Concrete 45mmx45cmx60cm Size Including Cost And Conveyance of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. High Intensity Retro – Reflection Sheet Shall Consist of Minimum Coefficient of Retro-Reflection As Per Table 6.6 of Irc 67-2012. The Retro Reflection Sheeting Shall Be Covered Under 7 Years Warranty Issued For Field Performance And a Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67:2012 (As Per Mort&H Specification No.801)
Supplying And Fixing of Digitally Printed Retroreflective Single Arrow Sign Board Made of Type Xi Grade Cube Corner Micro Prismatic Grade Sheeting Confirming To Irc 67-2012 As Per Astmd-4956-09 Specifications, Digitally Printed Using Latex Printer For Traffic Colour Logos/Text And Laminated With Clear Electro-Cut Film And Applied To Proper Prepared Sign Substrate Made of 4mm Thick Aluminum Composite Material (Acm) And Back Support Frame Angle of 25mm X 25mmx3mm Supported By 32Nb, 2.7mm Thick Stainless Steel Pipe All Round In 304 Grade And 2 Nos. of Vertical Posts of 65Nb, 3.04mm Thick Stainless Steel Pipe of 304 Grade Firmly Fixed To The Found By Means of Properly Designed Foundation of Size 300 mm X 300 mm X 450 mm With M15 Grade Cement Concrete And The Item Shall Include Earthwork Excavation, Cost of Materials, Loading, Unloading, Lead, Lift, Transportation Etc, Complete As Per Approved Template. The Sign Board Base Made of Type Xi Micro Prismatic Grade Reflector Sheeting of White Color Should Pass Minimum Co-Efficient of Retro- Reflection Values As Per The Table 6.9 of Irc 67-2012. The Retro Reflective Sheeting Shall Be Covered Under 10 Years Warranty Issued For Field Performance And Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained By The Engineer-In-Charge. The Warranty Shall Be Inclusive of Digitally Printed Logos/Text/Legends And Their Bonding To The Retro-Reflective Sheeting (As Per Mort&H Specification No.801). The Latex Printer Used For Digital Printing Should Be Used With Inks of Low Voc Emission And Should Have Greenguard, Eco Logo Certificate As Per Ul 2801 Standards. The Warranty & Test Certificates Shall Be Obtained From The Retro-Reflective Sheeting Manufacturer By The Contractor And Shall Be Submitted To Engineer-In-Charge.
Supplying And Fixing of Digitally Printed Retroreflective Double Arrow Sign Board Made of Type Xi Grade Cube Corner Micro Prismatic Grade Sheeting Confirming To Irc 67-2012 As Per Astmd-4956-09 Specifications, Digitally Printed Using Latex Printer For Traffic Colour Logos/Text And Laminated With Clear Electro-Cut Film And Applied To Proper Prepared Sign Substrate Made of 4mm Thick Aluminum Composite Material (Acm) And Back Support Frame Angle of 25mm X 25mmx3mm Supported By 32Nb, 2.7mm Thick Stainless Steel Pipe All Round In 304 Grade And 2 Nos. of Vertical Posts of 65Nb, 3.04mm Thick Stainless Steel Pipe of 304 Grade Firmly Fixed To The Found By Means of Properly Designed Foundation of Size 300 mm X 300 mm X 450 mm With M15 Grade Cement Concrete And The Item Shall Include Earthwork Excavation, Cost of Materials, Loading, Unloading, Lead, Lift, Transportation Etc, Complete As Per Approved Template. The Sign Board Base Made of Type Xi Micro Prismatic Grade Reflector Sheeting of White Color Should Pass Minimum Co-Efficient of Retro- Reflection Values As Per The Table 6.9 of Irc 67-2012. The Retro Reflective Sheeting Shall Be Covered Under 10 Years Warranty Issued For Field Performance And Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained By The Engineer-In-Charge. The Warranty Shall Be Inclusive of Digitally Printed Logos/Text/Legends And Their Bonding To The Retro-Reflective Sheeting (As Per Mort&H Specification No.801). The Latex Printer Used For Digital Printing Should Be Used With Inks of Low Voc Emission And Should Have Greenguard, Eco Logo Certificate As Per Ul 2801 Standards. The Warranty & Test Certificates Shall Be Obtained From The Retro-Reflective Sheeting Manufacturer By The Contractor And Shall Be Submitted To Engineer-In-Charge.
Supply and fixing of Reinforced cement concrete (M40 grade ) Rectangular precaster planter box a size of 1000 X 450 X 750mm with M40grade Concrete including the transportation form the Manufacture factory to site and placing planter boxes as directed by Engineer incharge etc and complete
Supply and fixing of Reinforced concrete (M40 grade ) circular precaster planter boxes a size of 600mm dia and 600mm height including the transportation form the Manufacture factory to site and placing the planter boxes as directed by Engineer incharge etc and complete
Supply and fixing of Glass fiber Reinforced concrete Rectangular precaster seater boxes a size of 1000 X 450 X 450mm with M30 grade Concrete including the one coat of puttty paint for finishing the external surface including the transportation form the Manufacture factory to site and placing the Rectanguar boxes as directed by Engineer incharge
Supply and fixing of Glass fiber Reinforced concrete circular precaster seater boxes a size of 600mm dia and 450 mm height with M30 grade Concrete including the one coat of puttty paint for finishing the external surface including the transportation form the Manufacture factory to site and placing the Rectanguar boxes as directed by Engineer incharge etc and complete
Art work as per the direction of department official, over Oil Painting with first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster of paris, putty, etc., wherever required (Relevent ISI STD), including putty works.
Supplying and Fixing of CNC cut perforated Enclosure for EB transformer and EB pillar Boxes by using CNC MS Sheet (2mm thick), door hinged with vertical support of 80X40 mm Tubular Post including horizontal Support and Stiffener (40 x40 x2mm) for MS sheet including Powder coating of all structural members and labor for fitting , welding and transportation of the material from the factory to Site as directed by the engineer - in charge.
Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement for RCC column footings,pintol blocks, plinth beam, staircase steps, critical steps, critical piers,etc.,using mild steel sheets of size 90x60cm and 10 gauge stiffened with welded mild steel angles of size25x25x3mm for boarding laid over silver Oak (country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc.,complete.
Brick work using best quality II class table moulded chamber burnt bricks of size 9" X 4-1/2" X 3" in cement mortor 1:3 for foundation and basement including curing etc complete complying with standard specification
Providing Quarry Rubbish From Approved Quarry Including Cost And Conveyance of All Materials To Work Site All Labour For Spreading. Watering Compacting Etc. Complete.
Refilling With Ex.Earth In Regular Layers of 150mm Thick Including Watering And Consolidation By Power Roller. Etc. Complete.
Mixing charges of Red soil, sand and manure uniformly (1:1:1) for Preparation of soil mixture (excluding material cost)
Supply & stacking of red earth at site to the departmental guage for premeasurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete.
Supply of well decomposed Farm yard Manure in a powdery form, devoid of soil sand, stones, plastics and other materials, highly nutrient and which supports plant growth.
Supply and stacking of pit sand / earth filling sand at site to the departmental guage for premeasurements obtained from sand deposits and should clean whithout solid particles
Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness - including hire charges of roller.
Supplying and Planting of Cassia fistula tree sapling of height 240 - 270 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
Maintenance of shrubs, other ornamental foliage, foliage planting and Trees planting including watering, weeding, application of fertilizers and pesticides, trimming etc for One month
Planting of Tabernum varigated foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
Planting of Acalypha varieties ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge
Supplying and Jointing 25mm dia PVC pipe including cutting,threading and jointing with necessary specials fixing to walls,with clamps and screws including making holes in thw wall or drilling holes in roof and making good the wall and roof after fixing the necessary scaffolding etc., complete
Providing of Rain Water Harvesting struture using precast well ring size 1200 (inner dia) x 4500mm (Height) (300mm x 15Nos) x 80mm (thick) using 1:1.5:3 concrete necessary earth work excavation providing PCC 1:5:10 and RCC cover slab of 1680mm dia 180mm thick . Providing bore hole of size 300mm dia using hand bore set upto 8.50m depth including shifting of the hand bore from one place to another plac with in 5km, erecting 200mm dia slotted PVC pipe (6kg/cm2) with cowl, filling with 20mm HBG metal out side peripheral of the pipe including cost, conveyance, cleaning the site and finishing etc., complete.
Boring using power rig 125mm dia upto hard formation and boring 100mm dia below this in rock formation. The entire column to be cleaned at site as directed including hire charges for the power rig for drilling the bore as described above both upto hard formation and then in rock formation (including the cost of fuel charges, transporting to and from the power rig etc.,complete.) including flushing the bore using compressor for a minimum time of 12 hours etc.,complete providing the danger lights during night time etc.,complete as directed during execution.
Supplying and lowering PVC pipe 125mm dia plain casing pipe of 6kg/sq.cm. ISI Std.
Supplying and lowering PVC pipe 125mm dia slotted casing pipe of 6kg/sq.cm. ISI Std.
Supplying and Jointing 40mm dia P.V.C pipe.including cutting, threading and ointing with necessary specials fixing towall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc.,complete
Supplying and jointing 20mm dia P.V.C pipe.including cutting, threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding,ect., complete.
Supplying and fixing of 40mm dia brass foot valve
Supplying and fixing 25mm dia G.M.Gate valve
Conducting yield test using 'V'notch and with suitable pump for one day as directed during execution for the bore well.
Supplying and fixing C.P.screw downtap of size 15mm
1.5 HP Jet Pump Set
I.SI.MARKED 2X16SQ.MM CABLE
I.SI.MARKED 4X16 SQ.MM CABLE
Cost of KIOSK pillar box
Cost of Erection of KIOSK pillar box
Labour for laying of cable through HDPE pipe ( 50 mm OD ) in plain cement concrete road including braking of cement concrete road & Filling of plain cement concrete mix of 1:1.5:3 ( with 12 mm jelly ) INCLUDING CARTING OF CABLE & HDPE PIPE (TRENCH SIZE 100mm BREADTH X 150mm DEPTH )
Cost of Erection & materials required for 7 mtr Street lamp pole with 1 MTR long SINGLE STRAIGHT BRACKET CONVENTIONAL FOUNDATION(Material ratio - 1:1.5:3)
Supply and fixing of Bollard made from mid steel with CNC machine finishing with 165mm outer diameter , 140mm inner diameter and 1030mm Height . Expose height 730mm from above Ground level and fixed the remaining 300mm below the GL. Two number of circular rib of R10mm radius are provided at the top and bottom of the bollard. 4 Nos of 15mm width retro reflective sheet pasted at the top and bottom groove by hot blow air sticking process for an ambience look and nighttime visibility. The whole product is power coated as per standard recommendation of Engineer. For fixing the Bollards with M15 cement concrete 45cmx44cmx60cm,55cm below ground level with 140dia x 250mm inner sleeve inserted for 150mm below ground level and 100mm projected above ground level. The inner sleeve is fixed with bollard using M16 bolt of 200mm length.
Supplying, fabricating and placing in position Mild steel / Ribbed tor steel for all RCC works as per design given including cost of steel and GI binding wire (18 G) in all floors etc., complete complying with standard specification (contractor has to make his own arrangements for the supply of steel and binding wire)
Plain cement concrete work 1:3:6 (1 cement,3 Crushed Stone Sand (Commercially called M-Sand) and 6 broken stone jelly 12 to 20mm gauge) including consolidation,curing,etc.,complete
EEarth work excavation for foundation in all kinds soils in varying depths including dismantling any masonry or roots met within foundation and shoring with planks, baling water if necessary and filling the sides with excavated earth including clearing and levelling site etc., complete with an initial lead of 10m.and lift of 2m
Plain Cement concrete work 1:4:8 (1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 8 blue granite broken stone jelly 40mm gauge) including consolidation curing, etc. complete for foundation, etc. upto basement
Supplying and filling with earth up to 20 Km. for foundation and basement,etc.,including watering and consolidating,etc.,complete
Supplying and erecting centering for sides and soffits including supports and structting upto 3m high for plane surfaces such asRCC coloumns,top and bottom slabs of boxing. sill labs,sun shades,etc.,with necessary facia using mild steel sheets ofsize 90x60cm and 10 gauge stiffened with welded mild steel angles of size 25x25x3mm for boarding laid over silverOak (country wood) joists of size 10x6.5cm spaced at about 90cmcentre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc.,complete
Brick work using best quality II class Ground moulded chamber burnt bricks of size 9" X 4-3/8" X 2-3/4" in cement mortor 1:6 for foundation and basement including curing etc complete complying with standard specification.
Brick work with fly ash bricks of size 230mm x110mm x70mm in C.M.1:5 (1 cement and 5 Crushed Stone Sand (Commercially called M-Sand)) including curing,etc.,complete for 23cm thick walls upto basement .(upto 1m high above G.L.)
Plastering with cement mortar 1:3 (1cement and 3 Crushed Stone Sand (Commercially called M-Sand)) 10mmthick including hacking, curing,etc., complete for ceiling andother exposed RCC surfaces.
Plastering with cement mortar 1:4 (1 cement and 4 P sand)12mm thick including curing, etc., complete
Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping,clean removal of dirt,etc.,complete and including necessary plaster paris,putty etc., wherever required.as per (ISI STD) (It must provide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years.
Supplying and fixing WALL TILES colours designed glazed tiles 300x200x6mm in C.M. 1:3, 20mm thick and pointing with same colour cement, polishing, clearing, etc., complete.
Paving the flooring with first quality plain CERAMIC TILES of all colours of size 305mmx305mmx6mm set in C.M.1:3,12mm thick including pointing with white cement,labour,materials,etc., (ISI.std)
Paving the flooring with CEMENT CONCRETE TILES hydraulic pressed Antiskid tiles as per pattern design 20mm thick in cm 1:3 including pointing with colour cement etc., complete.(ISI)
Supplying and fixing of M.S.Grills forWindows/Verandah/Ventilators Grill of standard rectangular design using 25mmx10mm M.S.Flats for outer frame and 20mmx5mm M.S.Flatsfor inner frame and for inner grill portion.The Vertical grillspacing should be 9.6cm. The centre portion spacing in between twogrills should be 14.5cm. 10 Nos of hold fasts of size 25mmx10mm for fixing the grill for Verandah and 8 Nos of hold fasts of size25mmx10mm for fixing the grill for Windows in the wall including one coat of primer etc.complete.,(As per sketch enclosed) and also as directed during execution.
Making and fixing M.S.Sheet gate of required size with twoshutters using necessary M.S.Flats 25x6mm, M.S.Angles 50x50x6mm and M.S.Sheet 5mm thick (7gauge) providing gun metal caps 75mmsize pintols, latches 25cm size for locking arrangements, name boards (C.M.) including cutting iron members, welding fixing gatein position,etc.,complete as directed during execution.(The design of gate furnished is subject to alteration during execution.) (ISI STD)
Stainless Steel Handrail 900mm high Providing and fixing stainless steel handrail 900mm high (as shownin drawing) made out of stainless steel conforming to SS 304 with 8%to8.5% nickel using 50.8mm outer dia at top (with 1.6mm wall thickness) and 38.10mm(1.6mm wall thickness ) stainless steel pipe placed vertically at 1m centre to centre and two horizontal SS pipe 25.40mm outer dia (with 1.2mm wall thickness) welded at a distance of 300mm using TIG welding process with 308L SS electrode (in station building all flooor staircases) with necessary bends, flanges and base plates. Rate is inclusive of all materials, labours, lead, lift,etc. as directed by Engineer in-charge.
Solid panel PVC door with frame Solid PVC door shutters using 19 gauge 19mm MS sq..tubes for styles and outer frames. 15mm MS sq.tubes for top, lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30 mm. The over all size of frames shall be 50mmx45mm, with suitable rabate for housing the shutter.including labour charges etc., complete.as per ISI standard.
Painting new iron work two coats with ready mixed paint with relevent ISI STD of superior quality and approved colour
Supplying and fixing of Frame fabrication with 1"x1" MS square tube with reflective and digital printing on 1mm GI sheets fitted with suitable aluminium beadings on four sides and painted etc., complete as per colour specifications instructed by Corporation officials.
Cladding the vertical wall with Jet Black Granite slabs (16mm to 18mm thick) and best quality free from all defects and set in CM 1:2 for 10mm thick.etc., complete as directed by the Engineer - in - charge
Supplying and fixing 25mm dia wheel valve.
Supplying and fixing 20mm dia wheel valve
Construction of Inspection chamber of size 60x60x60cm with necessary earth work excavation, 40mm size brick jelly concretein C.M.1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10 broken brick jelly)stock brick work in c.M.1:y (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) for 23cmthick wall, benching, channelling and plastering,interior,exterior and top with c.M.1:3 (1 cement and 3 Crushed Stone Sand (Commercially called M-Sand) Sandsand) 12mm thick and providing 7.5cm thick RCC loose slabcovering in CC 1:2:4 ( 1 Cement,2 Crushed Stone Sand (Commercially called M-Sand) and 4 blue granitebroken stone jelly of 12mm to 20mm size) with necessary reinforcement and arrangements to lift for cleaning purpose,etc.,complete.
Supplying and fixing in position best Indian type water closet51cm of superior quality and approved make white glazed earthernware with 'P' or 'S' trap and a pair of porcelin footrest and forming flooring alround water closet using 40mm size broken brick jelly concrete in C.C1:4:10(1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10broken brick jelly) and sand filling around the closet including finishing the surface with C.M.1:3 ( 1 cement and 3 Crushed Stone Sand (Commercially called M-Sand)) 20mm thick including making good all the disturbed portions,etc., complete.
Providing and fixing 75mm dia Nahini trap (floor trap) with brassgratings
Supplying and fixing chromium plated brass towel rail 60cm long
Providing and fixing colour glazed E.W.C. with rose wood seatings (Black)low level flusing tank with fittings, etc., complete.(m.d18)
Providing and fixing PVC slotted vent cowl of 110mm dia pipe. with relevent ISI STD
Providing and fixing 110mm dia PVC soil or vent pipe.with relevent ISI STD
Supplying and erecting SINTEX or approved equivalent make HDPE plastic vertical cylindrical 1000 Litre water storage tank, strickly adhering ISI standard as per ISI Mark 12701 (Latest revision) including all taxes and freight charges within Corpn.City Limit.
Supplying and fixing 15mm dia C.P.Pillar tap
Supplying and fixing 55cm x 40cm colour glazed wash basin withl ead and brass connection, C.P. pillar tap and other fittings,etc., complete.
Providing and fixing in position superior quality and approved make white glazed flat back lipped urinal of size 46.5x55.5x26.5cm with necessary specials such as P.V.C.waste pipe32mm dia with bell mouth opening and 75cm long lead and brass connection, 15mm dia wheel valve etc.,including fixing with necessary teakwood wall plugs, screws, etc.,and making good the walls,etc.,complete as directed during execution.
Supplying and fabricating of stainless steel pipe 40mm dia (14gauge) 304 gradewithbaseplate and clamp fixing including polishing and generator charges etc.
Providing enamel indication board with proper male or female figure of size 35x30cm as directed.
Conducting yield test using 'V'notch and with suitable pump for one day as directed during execution for the bore well.
Supplying and fixing 40mm dia G.M. foot valve (Toilet)
Supply and fixing of TNEB meter Board suitable for 32A Single Phaseservice connection with 32A Fuse unit (500V) 32A neutral link andearth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mmx 19mm with supporting TW reepers of 1" thick an either side withpainting with suitable bolt and nuts for fixing the TW plank on wall withearth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.
Supply and fixing of 8 way SP DB of 16 A / way with 32 A DP switch with metal clad of 500 V with F & N (Side Handle) on suitable angle iron frame work with trunking box with earth connection only
Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry .
Supply of LED flood light fitting of 30 W to 60 W with 7 years replacement guarantee (in place of 70 W MH FL).
Clamping of 2 x 6 sq.mm L.T UG Cabl on wall with MS Clamp
HDPE PLAIN PIPE OF SIZE 50MMX2.8MM THICK WIT SILICON COATING ( ALL COLOUR
Supplying and erecting centering for sides and soffits including supports and strutting upto 3m high for plane surface such as RCCslab, rectangular beams,'TEE' or 'L' beams,lintels,bedblocks,staircase waists and landing slabs, landing beams ,canopy, etc.,with all cross bracings using mild steel sheets of a size 90x60cmx3.175mm and 10 gauge stiffended with welded mild steelangles of size 25x25x3mm for boarding laid over silver Oak(Country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 7.5cm centre to centre etc.,complete
Supplying clean Crushed Stone Sand (Commercially called M-Sand) Sand sand and filling in regular layers of 15cm thick each including watering, consolidating etc. complete for foundation, basement, etc.
Providing and laying in position ,Standardised Concrete Mix M-25 Grade in accordance with IS :456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and m,aximum water cement ration of 0.50, including admixture (Plasticiser/Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the excess usage of materials)
Towards the hire charges for providing temporary approach platforms to the residences near execution site including the cost of fabrication,placing properly across the drains removing the same after the work is complete etc as directed by Engineer in charge. The approach platform will be made of 2.40mx1.20m - 6mm MS sheet fabricated with 50mm dia B-class MS pipe- 3.6m at bottom longitudinal and 3 Nos MS flat 25mmx6mm cross direction and both side of hand rail with 50mm dia 1 No of horizontal and 2 Nos of Vertical support including fixing MS flat drilled and suitable for joining with bolts and nuts including cost of materials, welding, painting etc complete
cost of supply of Double wall corregated duct 120/103.5mm - Orange or Blue colour ( to be used instead of HUME PIPE)
ROAD CUTTING BY MECHANIZED TOOL INCLUDING CARTING & DRAWAL OF CABLE & HDPE DWC PIPE
Mazdoor Category II for Traffic Diversion
Providing & Laying 100x100mm rough finish grey cobbles stone and shape of approved and complete as per direction of Engineer-in- Charge. including transport ,loading ,unloading and conveyance of grey cobbles granite from available source to work site, including labour charges for fixing the granite and pointing etc., complete
Providing & Laying 100x100 mm rough finish black cobbles stone and shape of approved and complete as per direction of Engineer-in- Charge. including transport ,loading ,unloading and conveyance of black cobbles granite from available source to work site, including labour charges for fixing the granite and pointing etc., complete
Providing & Laying 45 to 50mm rough finish black granite and required size and shape of approved and complete as per direction of Engineer-in- Charge. Including transport, loading, unloading and conveyance of black granite slab from available source to work site, including labour charges for fixing the granite and pointing etc., complete.
60 ML: AUX Waste Bin Material: Stainless Style Contemporary Mounting: Root fixed, Surface/baseplate fixed, wall/post mounted Features: Ashtray Size (w x d x h) : 496x392x875 Material: High Tensile Steel
Stainless Steel Tacticle Indicator Stud (dots) - stainless steel 304 grade material, dimension 35mm x 25mm x 4.5mm, 8mm dia 12mm length fixing screw, direction design strip brush glossy finish
Stainless Steel Tacticle Indicator Strip - stainless steel 304 grade material, dimension 280mm x 35mm x 5mm, 8mm dia 12mm length fixing screw, direction design and diamond design, brush glossy finish
Supply, installation and fitting to necessary shape Corten steel sheet of 5mm thickness on signage as per the design of the architect.
Supply, installation and fitting to necessary shape Acrylic sheet of 5mm thickness on signage as per the design of the architect.
Supply, installation and fixing of swing and chain hooks into the metal frames as per the design of the architect.
Supply, installation of CNC cutting on 5mm corten steel sheet as per the design of the architect.
Supplying and Laying RCC non pressure spun pipe with socket and spigot ends as per IS 458/2003 manufactured with sulphate resistant cement with 12 mm HI -alumina lining provided for rubber ring joints. (NP3 Class - 900mm dia) including Rates for Conveyance of R.C.C. /P.S.C/B.W.S.C. Pipes and Specials (assumed at 35km) including Lowering RCC pipes and specials into the trenches and laying to proper grade and alignment
Supplying and Laying RCC non pressure spun pipe with socket and spigot ends as per IS 458/2003 manufactured with sulphate resistant cement with 12 mm HI -alumina lining provided for rubber ring joints. (NP3 Class - 600mm dia) including Rates for Conveyance of R.C.C. /P.S.C/B.W.S.C. Pipes and Specials (assumed at 35km) including Lowering RCC pipes and specials into the trenches and laying to proper grade and alignment
Sewer: Recessed Double Seal RED 261 DSRH – 800 x 800mm DI MANHOLE COVER AND FRAME IN D400 LOAD CLASS , as per BS EN 124 , BLACK BITUMEN PAINT
Power: (Large Access, Multi Part) Recessed Single Seal RED 324 SSRH – 3 * 900 x 600mm DI MANHOLE COVER & FRAME IN D400 LOAD CLASS , Black Bitumen Paint
Telecom: Recessed Double Seal RED 261 DSRH – 800 x 800mm DI MANHOLE COVER & FRAME IN D400 LOAD CLASS , Black Bitumen Paint
Storm Water: Recessed Double Seal RED 042 DSRH – 600 x 600mm DI MANHOLE COVER & FRAME IN D400 LOAD CLASS , Black Bitumen Paint
Gully Grates RED 048 GRH – 600 x 600mm DI GULLY GRATE & FRAME IN D400 LOAD CLASS , as per BS EN 124 Black Bitumen Paint
Gully Grates: A1216 305X609 MM DI TRENCH GRATE
Replacement of Underground Utilities (PVC Pipe) damaged during earthwork excavation for pipe laying works including cost of additional earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of PVC pipes, couplers, jointing materials and required specials, cutting, conveying , laying, jointing and cost of refilling for the additional earthwork etc complete and as directed by the board officers. (25mm Dia PVC Pipe (10 KSC))
Replacement of Underground Utilities (PVC Pipe) damaged during earthwork excavation for pipe laying works including cost of additional earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of PVC pipes, couplers, jointing materials and required specials, cutting, conveying , laying, jointing and cost of refilling for the additional earthwork etc complete and as directed by the board officers. (32mm Dia PVC Pipe (10 KSC))
Replacement of Underground Utilities (PVC Pipe) damaged during earthwork excavation for pipe laying works including cost of additional earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of PVC pipes, couplers, jointing materials and required specials, cutting, conveying , laying, jointing and cost of refilling for the additional earthwork etc complete and as directed by the board officers. (50mm Dia PVC Pipe (10 KSC))
Supplying and Laying HDPE PIPES - PE 100 AS PER IS 4984/2016 - PN 6 - 200mm including Rates for Conveyance of PVC/ HDPE /GRP Pipes and Specials (assumed at 35km) including Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the Officers - For depth upto 2m - 180mm to 250mm dia (OD) HDPE pipe
Providing of 7- Way 40mm Multi Ducts with solid permanently solidly lubricated Silicore in inner layer for ICT fibre cables comforming to ASTMF 2160, ASTM D 2444 and /or equivalent indian standard. External Sheath shall be in Orange Color and shall be free from visual defects like blisters, shrink holes, flaking, scratches, groove lines & surface roughness. The colour of the 7 nos. PLB HDPE ducts shall be Green, blue, yellow, Brown, violet, Grey , Red for differentiation. Outer sheet thickness shall be 1.2mm +/- 0.2mm. The inner surface of the multi channel ducts shall be spirally ribbed & shall be of a configuration for faster installation of cables. Wall thickness(mm) of each of the ducts Excluding rib height shall be 2.9mm +/- 0.3mm. ISO Requirements- ISO 9001, 14001, 18001, complete as per specifications and directions of Engineer-in-charge.
Supplying and Laying HDPE PIPES - PE 100 AS PER IS 4984/2016 - PN 6 - 110mm including Rates for Conveyance of PVC/ HDPE /GRP Pipes and Specials (assumed at 35km) including Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the Officers - For depth upto 2m - 90mm to 110mm dia (OD) HDPE pipe
Supplying and Laying HDPE PIPES - PE 100 AS PER IS 4984/2016 - PN 6 - 63mm including Rates for Conveyance of PVC/ HDPE /GRP Pipes and Specials (assumed at 35km) including Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the Officers - For depth upto 2m - 50mm to 75mm dia (OD) HDPE pipe
Supply and Delivery of DWC Structured Wall Polyethylene Piping Systems (Pipe with online/offline coupler and elastomeric sealing ring) with required specials non-smooth external annular corrugated and smooth internal surface (Double wall) (SN 8 Class) for non-pressure underground sewerage, drainage application generally as per IS-16098 (Part-2) type B.
Laying DWC pipes including earthwork excavation for trenches in hard stiff clay,blackcotton, hard red earth, shales, murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil depositing the earth on banks with initial lead of 10 m and initial lift of 2m carting the pipes from any of the Board’s Stores to the site of work lowering into the trenches, aligning, watering and ramming to consolidation, etc., (at 1.5m depth)
Laying DWC pipes including earthwork excavation for trenches in hard stiff clay,blackcotton, hard red earth, shales, murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil depositing the earth on banks with initial lead of 10 m and initial lift of 2m carting the pipes from any of the Board’s Stores to the site of work lowering into the trenches, aligning, watering and ramming to consolidation, etc., (at 2.0m depth)
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for PCC works including laying in layers of not more than 15cm thick,compacting, curing etc complete for encasing and end concrete.
Disposal of Surplus earth
Cutting Asphaltic concrete road using Tractor Compressor (As per Market Rate)
Hire charges for diesel pumpset for 3 HP with fuel and crew charges including transportation
Supply and Filling Stone Dust
Providing House service connection: Supplying, laying jointing and testing UPVC pipe including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with initial lead of 10m. lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick watering, ramming to consolidation and disposal of surplus earth etc., complete (110mm dia upto a depth of 1.5m)
Providing House service connection: Supplying, laying jointing and testing UPVC pipe including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with initial lead of 10m. lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick watering, ramming to consolidation and disposal of surplus earth etc., complete (160mm dia upto a depth of 1.5m)
Earthwork excavation for different types of soils including backfilling to make trial pits
Hiring charges for JCB for earth work excavation
Hire charges for tractor compressor for concrete road (market Rate)
Laying DI pipes including earthwork excavation for trenches in hard stiff clay, blackcotton, hard red earth, shales,mrams gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil depositing the earth on banks with initial lead of 10m and initial lift of 2m carting the pipes from any of the Board's Stores to the site of work lowering into the trenches, and aligning, refilling the trenches with excavated soil, watering and ramming to consolidation, etc,, complete (Including backfilling) 150mm dia @ 1.5m depth Schedule No.1.1.1 Pg.No.3
Making Rubber Joints for DI Pipes (SOR P.No 24)
i)Cuting of DI Pipes (SOR P/No 13) 150 mm dia pipe
ii)Cuting of DI Pipes (SOR P/No 13) 200mm dia pipe
iii)Cuting of DI Pipes (SOR P/No 13) 300mm dia pipe
Supplying and fixing of 200mm dia MJ Collar
Supplying and fixing of 150mm dia MJ Collar
Supplying and fixing of 100mm dia MJ Collar
Supplying and fixing of 200mm x 150mm dia Tee
Supplying and fixing of 300mm x 150mm dia Tee
Supplying and fixing of 200mm dia 90 deg bend
Supplying and fixing of 150mm dia 90 deg bend
Supplying and fixing of 200 x 150 mm dia Tapper
Supplying and fixing of 300 x 150 mm dia Tapper
Supplying and fixing of 150 x 100 mm dia Tee
Supplying and fixing of 150mm dia Sluice Valve
Supplying and fixing of 200mm dia Sluice Valve
Supplying and fixing of 300mm dia Sluice Valve
Supplying and conveying and fixing of specials Supplying of 150 mm dia Di pipe K7 class (P.No 141)
Supplying and fixing of 150 mm dia DI End Cap
Cutting 450mm to 300mm (18” to 12") C.I. pipe and fixing 450mm to 50mm branch
Cutting 250mm to 175mm (10” to 7”) C.I. pipe and fixing 250mm to 50mm branch
Cutting 150mm to 100mm (6” to 4”) C.I. pipe and fixing 150mm to 50mm branch
Construction of inspection chambers of following sizes with earth work excavation for foundation with 23 cm thick brick jelly cement concrete bed in CM .1:4:10 using 40 mm Brick jelly for foundation, brickwork in C.M. 1:6 for chambers, plastering with C.M. 1:3 12 mm thick, benching, channelling, 75 mm thick RCC looses lab covering in C.M. 1:2:4 mix using 20mm blue granite jelly including necessary reinforcement, etc., complete for 60 x 60 x 120cm (P.No 51)
Hire charges for diesel pumpset for 7.5 HP for dewatering subsoil water (SOR P.No 43)
Cement Concrete 1:2:4 using (crushed stone sand M-SAND) 20mm guage hard broken stone jelly for PCC works including laying in position, compacting, curing, finishing, etc., complete (for roadcut restoration portion) (SOR P.No 91)
Disposal of surplus earth (SOR P.No 1)
Construction of thrust blocks using cement concrete 1:3:6 40mm BG jelly for plain cement concrete. 150mm dia 90 deg bend
Construction of thrust blocks using cement concrete 1:3:6 40mm BG jelly for plain cement concrete. 200mm dia 90 deg bend
Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping out let suiting for 1/2", 3/4" & 1" clear bore and wit wide plastic strap ( Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo Plastic elastomeric (TPE) material around.20mm (1/2") - P.No 157, 25 (i)
Supply and Filling Stone Dust - P.No 169
Supplying and Fixing of hose pipe 1" dia
SUPPLY OF ARCHITECTURAL CONTEMPARORY STYLE POST TOP LED LIGHT FIXTURE - MODEL - LYRA (40W-50W) Power Module LED, 3000K/4000K, IP-66>4500Lumens -Lyra:Upper part in circular shape & Lower part in "V" shape,both are in single piece made of die-cast aluminum using pressure die casting process. manufacturer name/logo should be embosed on the body. Prismatic screen in Flat tempered glass. Pure polyester powder coating in customised colour Metallaic Grey. Silicone gasket ensures the IP Rating - IP 66. Height – 500mm,Diameter - 420mm,Weight -8Kgs., Area Exposed to Wind(S) - 0.08 m2 Power LED Module with Company /brand name printed on PCB with the metal core plate, in compliance with IEC 62031 (Supporting Test Report from UL Authorised Laboratory should be submitted).LED Chips of CREE/NICHIA/OSRAM/LUMILEDS make with Individual LED's Minimum Luminous Flux (lm) - >170lm/w shall be used- same should be supported by LED manufacturer's tech sheet . Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection a minimum of 4kV (an additional surge protection device of 10kV also provided in- built the fixture). Optics with refractive lens in PMMA which offers Type II/III/IV/V distribtuion.LED.Lifetime @L90 >1,00,000hours@Ts 85°C. LM 80 report should be submitted to support the same.The Light fixture shall be in compliance with IEC 60598-2-3; IEC 60598-1(Supporting Test Report from UL Authorised Laboratory should be submitted) .LM79 report also should be submitted from UL Authorised Laboratory. Sample should be submitted for approval from concerned engineer-in charge. CAT REF - ARCHITECTURAL CONTEMPARORY STYLE POST TOP LED LIGHT FIXTURE - MODEL - LYRA (40W-50W) Power Module LED, 3000K/4000K,IP-66
SUPPLY OF 3.5M HEIGHT ARCHITECTURAL POST TOP POLE - 3.5M height Post top made of MS pipe sections 114mm dia. & 76mm dia.. Joint between 114 & 76 shall be finished to get a tapering shape as shown in the sketch. The pole to be provided with a suitable size steel base plate. This mounting steel base plate along with foundation 'J' bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication Entire Pole is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size.wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole strength. Pole & it's parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint - customised colour Metallaic Grey.CAT REF - -ARCHITECTURAL 3.5M HEIGHT POST TOP POLE
SUPPLY OF NSL-12S - Focus Spot Light, 9W,LED,3000K CCT, IP-65.PF - > 0.9, Electronic Driver which offers protection against short circuit, over-temperature and over -voltages up to 5kV, IP 65 protection,CRI > 70,voltage input AC100-240V.Body-Die-casting aluminium Body with Surface Anti-ageing electrostatic spray processing & screen (IK 08). Body colour-RAL 9004 + RAL 9018 Matt , Dimension-140mm(Dia.)x180mm(L)x152mm(W)x 192mm(H), Weight-2kgs. Estimated Lifetime-L70 @ 50,000hours minimum.
SUPPLY OF NLS-N-15-S, Neon Flex, 12-16W/M, RGBW,IP 67, DC24V With DMX controller & Xlor Connectors, with following features & specifications: - Neon Flex - LED?EPISTAR/Equivalent, Silicon material-Much more flexible,Efficient heat dissipation,Smooth plane lighting surface,Perfect resealing with silicone glue. Resistant UV, Flame, Salt, Chlorine. Side Bending (Diameter ≥ 180mm). with suitable aluminium fixing clips/channels for mounting, It also includes DMX decoder & DC 24V Electronic Power Supply(metal body)(Meanwell XLG/Equivalent) ,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection of 4kv miniumum. Approved Makes --NLS-N-15-S, Neon Flex, 12-16W/M, RGBW, IP 67. The Stand Alone DMX controller shall be used to control a wide variety of different DMX systems- from RGB/RGBW to more advanced moving and color mixing luminaires. The controller comes with 256DMX channels., USB connectivity for programming/control• 8 dry contact trigger ports via HE10 connector• stand alone mode with 1 area and 20 scenes.Technical Data- • Input Power 5-5.5V DC 0.6A • Output Protocol DMX51- 256 channels • Programmability PC • Connections XLR3, mini USB, 1 HE10 • Environment IP20. 0°C - 50°C • Buttons 2 buttons to change scene Standards EC, EMC, ROHS
SUPPLY OF ARCHITECTURAL CONTEMPARORY CATENARY TYPE POLE FOR MOUNTING HANGING LIGHT FIXTURE - 6M height Pole made of hot dip galvanised mild steel pipe sections 89mm dia. Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The hot dip galvanised pole to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. Pole & it's parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint - customised colour Metallaic Grey.
SUPPLY OF HANGING LIGHT CHAIN WITH 30NOS OF MODEL GLOBE 50, 3000K - 15M LENGTH Hanging light chain consists of 30nos. Of Globe 50 in 3000k-15M Length.Each Globe wattage-0.2W,IP rating of globe44,Dia.-> 50mm.Source-SMD Type LED. These source LED's works on DC24V. Inbuilt Power adapter.
Supply of Steel Rope - Rope made of tense Stailnless steel to be laid between poles, to support the light fixture.
Supplying and fixing 2way Bib Cock with Health Faucet.
FLUSH TANK White - 7.5 litre capacity
Testing Commissioning of all Light Fitting
VIJAY GOWTHAM ENGINEERING WORKS
Mars Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid