02/EE/C/EC/MTNL/NIT/2026-27

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):(a) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

P/F glazing with new EPDM rubber / neoprene gasket etc in aluminum door, window, ventilator shutters and partitions etc. including taking out existing glass panes and fixing the same complete as per the architectural drawings and the directions of Engineer-in-Charge. (a) Renewing glazing with new EPDM rubber / neoprene gasket etc. with float glass panes of 4.0 mm or 5.0 mm thickness. [Cost of aluminum snap beading shall be paid in basic item & Glass panes shall be supplied by the department free of cost as required]: (a) With float glass panes of 4.0 mm or 5.0 mm thickness.

Providing and fixing 100mm wide vertical blind . Head rail is to be manufactured from extruded powdercoated aluminium section having external dimention 40 X 33 mm high. Minimum vane overlap in closed fully fitted position to be 17mm. Transverse movement of vane is to be controlled by polyester braided cord. The cord is to be tensioned by weight. Rotation to be controlled by endless ball chain with boom peat mechanism and shaft of extruded corrosion resistant aluminium complete as per approval & direction of Engineer-in-charge ( colour, quality & make of blind to be got approved from the Engineer-in-charge).

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (a) Of area 3 sq. metres and below

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately): (a) Kiln seasoned and chemically treated hollock wood.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.: (a) Twin rubber stopper

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. (a) With cement mortar 1:4 (1 cement : 4 fine sand).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (a) Hot finished welded type tubes.