TENDER FOR ITEM RATE CONTRACT FOR REPAIR/ MAINT OF CI/DI/GI PIPES, VALVE, JOINT AND REPLACEMENT OF OLD DAMAGE PIPES WITH NEW DI PIPE LINE (NORTH AREA) OF AGE E/M (WS) UNDER GE(U) E/M MEEERUT CANTT.

Amount

Taking down old existing unserviceable bib tap and S&F PTMT( Polytetra Methyllene Terephthalate ) Bib taps suitable for 20 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 20 mm-125 gms complete all as specified .Make : Prayag or equivalent

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in any type of soil complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Disconnecting and taking up old existing 150 mm dia CI pipe and connection of any description and in any position of trenches/ under floors/ on walls etc including connected fittings accessories and fixtures such as bend, union, elbow socket etc all as specified.

Disconnecting and taking up old existing 100 mm dia CI pipe and connection of any description and in any position of trenches/ under floors/ on walls etc including connected fittings accessories and fixtures such as bend, union, elbow socket etc all as specified.

M&L 150mm nominal bore ductile iron pipes with spigot and socketed ends , centrifugally cast(spun) , class K9, in any length , externally coated with metalic Zinc Coating finished with bituminous paint and internally cement mortar lining laid in trenches/ fixed to walls or under floors etc. and testing complete all as specified of the following bore:- Note :- Excavation, earthwork and FI clamps, Jointing and jointing materials shall be measured and paid separately)

M&L 100mm nominal bore ductile iron pipes with spigot and socketed ends , centrifugally cast(spun) , class K9, in any length , externally coated with metalic Zinc Coating finished with bituminous paint and internally cement mortar lining laid in trenches/ fixed to walls or under floors etc. and testing complete all as specified of the following bore:- Note :- Excavation, earthwork and FI clamps, Jointing and jointing materials shall be measured and paid separately)

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 15mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 20mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 25mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 40mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 50mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 80mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 100mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 150mm bore pipe complete all as specified.

Supply and Fixing 15mm nominal bore mild steel galvanised water tubing, medium grade , ISI marked laid in trenches or under floors or fixed on walls with all fittings like bends, elbows, Tee, reducers, sockets, unions etc complete all as specfied and directed.

Supply and Fixing 20mm nominal bore mild steel galvanised water tubing, medium grade , ISI marked laid in trenches or under floors or fixed on walls with all fittings like bends, elbows, Tee, reducers, sockets, unions etc complete all as specfied and directed.

Supply and Fixing 25mm nominal bore mild steel galvanised water tubing, medium grade , ISI marked laid in trenches or under floors or fixed on walls with all fittings like bends, elbows, Tee, reducers, sockets, unions etc complete all as specfied and directed.

Supply and Fixing 40mm nominal bore mild steel galvanised water tubing, medium grade , ISI marked laid in trenches with all fittings like bends, elbows, Tee, reducers, sockets, unions etc complete all as specfied and directed.

Supply and Fixing 50mm nominal bore mild steel galvanised water tubing, medium grade , ISI marked laid in trenches with all fittings like bends, elbows, Tee, reducers, sockets, unions etc complete all as specfied and directed.

Supply and Fixing 80mm nominal bore mild steel galvanised water tubing, medium grade , ISI marked laid in trenches with all fittings like bends, elbows, Tee, reducers, sockets, unions etc complete all as specfied and directed.

Supply and Fixing 100mm nominal bore mild steel galvanised water tubing, medium grade , ISI marked laid in trenches with all fittings like bends, elbows, Tee, reducers, sockets, unions etc complete all as specfied and directed.

Supply and Fixing 150mm nominal bore mild steel galvanised water tubing, medium grade , ISI marked laid in trenches with all fittings like bends, elbows, Tee, reducers, sockets, unions etc complete all as specfied and directed.

Material and labour for rubber gasket joints in flanged end cast iron pipes suitable for 250mm bore pipes and fittings complete with and including minimum 3mm thick rubber/fibre gasket and necessary nuts and bolts and washers all as specified and directed.

Material and labour for rubber gasket joints in flanged end cast iron pipes suitable for 200mm bore pipes and fittings complete with and including minimum 3mm thick rubber/fibre gasket and necessary nuts and bolts and washers all as specified and directed.

Material and labour for rubber gasket joints in flanged end cast iron pipes suitable for 150mm bore pipes and fittings complete with and including minimum 3mm thick rubber/fibre gasket and necessary nuts and bolts and washers all as specified and directed.

Material and labour for rubber gasket joints in flanged end cast iron pipes suitable for 100mm bore pipes and fittings complete with and including minimum 3mm thick rubber/fibre gasket and necessary nuts and bolts and washers all as specified and directed.

Material and labour for rubber gasket joints in flanged end cast iron pipes suitable for 80mm bore pipes and fittings complete with and including minimum 3mm thick rubber/fibre gasket and necessary nuts and bolts and washers all as specified and directed.

Material and labour for fittings for Spigot and socket pipes(any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc upto 150mm bore CI pipes all as specified and directed. Note:- Joints and jointing material shall be measured and paid separately.

Material and labour for fittings for Spigot and socket pipes(any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc for size 200mm to 300mm bore CI pipes all as specified and directed. Note:- Joints and jointing material shall be measured and paid separately.

Material and labour for run lead joint for cast iron spigot and socket Pipes 250mm bore including use spun yarn and well caulking all as specified and directed.

Material and labour for run lead joint for cast iron spigot and socket Pipes 200mm bore including use spun yarn and well caulking all as specified and directed.

Material and labour for run lead joint for cast iron spigot and socket Pipes 150mm bore including use spun yarn and well caulking all as specified and directed.

Material and labour for run lead joint for cast iron spigot and socket Pipes 100mm bore including use spun yarn and well caulking all as specified and directed.

Material and labour for run lead joint for cast iron spigot and socket Pipes 80mm bore including use spun yarn and well caulking all as specified and directed.

M&L for Cutting of existing 250mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for construction of Brick masonry valve pit of 1000mmx1000mmx1000mm internal size consisting of Mild steel frame and cover including all necessary excavation and earthwork in any type of soil, Brickwork, PCC, synthetic enamel painting etc complete all as specified and shown in drawing No. CEBZ drg No. TD/EM/12

M&L for construction of Brick masonry valve pit of 1200mmx1200mmx1200mm internal size consisting of Mild steel frame and cover complete complete all as specified and shown in drawing No. CEBZ drg No. TD/EM/12

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 200mm dia,Class PN 1.6 with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 150mm dia,Class PN 16 (Bar) with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 100mm dia,Class PN 16 (bar) with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 80mm dia,Class PN 1.6 with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 50 mm bore dia. iron pipe class 2, suitable for working pressure upto 25 kg per sq cm and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 40 mm bore dia. iron pipe class 2, suitable for working pressure upto 25 kg per sq cm and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore dia. iron pipe class 2, suitable for working pressure upto 25 kg per sq cm and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe class 2, suitable for working pressure upto 25 kg per sq cm and fixed complete all as specified.

M&L for Cutting of existing 200mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 150mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 100mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 80mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L Making holes/ bores in GI water mains including cutting of pipe where required for making branch connection of 50mm bore for alterations or additions ( or lengthening screw on pipe to form connector) and providing clamp made out of FI 75x6mm and tightening with mild steel nuts, bolts and washers etc. complete all as specified.

M&L Making holes/ bores in GI water mains including cutting of pipe where required for making branch connection of 40mm bore for alterations or additions ( or lengthening screw on pipe to form connector) and providing clamp made out of FI 50x6mm and tightening with mild steel nuts, bolts and washers etc. complete all as specified.

M&L Making holes/ bores in GI water mains including cutting of pipe where required for making branch connection of 25mm bore for alterations or additions ( or lengthening screw on pipe to form connector) and providing clamp made out of FI 40x6mm and tightening with mild steel nuts, bolts and washers etc. complete all as specified.

Taking down existing water meter from discharge line and servicing, renewing of minor parts and fixing existing place after calberation all as directed by Engr in Charge.

Dismantling and opening carefully old non functional sluice valve 250mm bore of any description and in any position for servicing, over hauling/ greasing etc and replacement of old unserviceable parts and reassembling the sluice valve and testing complete all as specified and directed.

Dismantling and opening carefully old non functional sluice valve 200mm bore of any description and in any position for servicing, over hauling/ greasing etc and replacement of old unserviceable parts and reassembling the sluice valve and testing complete all as specified and directed.

Dismantling and opening carefully old non functional sluice valve 150mm bore of any description and in any position for servicing, over hauling/ greasing etc and replacement of old unserviceable parts and reassembling the sluice valve and testing complete all as specified and directed.

Taking up/ down of existing unserviceable 100mm bore Reflux valve (NRV) of any description/ in any position, taking out joints and removing to stores complete all as specified.

Taking up/ down of existing unserviceable 150mm bore Reflux valve (NRV) of any description/ in any position, taking out joints and removing to stores complete all as specified.

S&F Cast Iron Reflux valve (NRV) Single door pattern with Bye pass arrangement,Class PN 1.6, both end flanged, suitable for 100mm bore pipe (ISI-5312 ), Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

S&F Cast Iron Reflux valve (NRV) Single door pattern with Bye pass arrangement,Class PN 1.6, both end flanged, suitable for 150mm bore pipe (ISI-5312 ), Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable stainless steel spindle (stem) of sluice valve of 80mm bore and S&F stainless steel spindle including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) of sluice valve of 100mm bore and S&F stainless steel spindle including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) of sluice valve of 150mm bore and S&F stainless steel spindle including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) of sluice valve of 200mm bore and S&F stainless steel spindle including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) of sluice valve of 250mm bore and S&F stainless steel spindle including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel / Gun metal nut for spindle (stem) of sluice valve of 80mm bore of any pressure rating and S&F Gun metal nut for spindle complete all as specified.

Taking down of existing unserviceable stainless steel / Gun metal nut for spindle (stem) of sluice valve of 100mm bore of any pressure rating and S&F Gun metal nut for spindle complete all as specified.

Taking down of existing unserviceable stainless steel / Gun metal nut for spindle (stem) of sluice valve of 150mm bore of any pressure rating and S&F Gun metal nut for spindle complete all as specified.

Taking down of existing unserviceable stainless steel / Gun metal nut for spindle (stem) of sluice valve of 200mm bore of any pressure rating and S&F Gun metal nut for spindle complete all as specified.

Taking down of existing unserviceable stainless steel / Gun metal nut for spindle (stem) of sluice valve of 250mm bore of any pressure rating and S&F Gun metal nut for spindle complete all as specified.

M&L for making hole in GI pipe line including cutting of pipe where required for making branch connections , including S&F mild steel clamps made out of 40x6 mm flat iron duly fitted with suitable size of GI socket suitable for taping 20mm nominal bore pipe complete all as specified and directed.

Dismantling and opening carefully old non functional sluice valve 100 mm bore of any description and in any position for servicing, over hauling/ greasing etc and replacement of old unserviceable parts and reassembling the sluice valve and testing complete all as specified and directed.

Dismantling and opening carefully old non functional sluice valve 80 mm bore of any description and in any position for servicing, over hauling/ greasing etc and replacement of old unserviceable parts and reassembling the sluice valve and testing complete all as specified and directed.

M&L for fabricating and fixing on pipe line MS clamps of flat iron made to shape along with nuts bolts, washers for stopping leakage of pipe line including painting of clamps with aluminium paint etc suitable for pipe line all as specified and directed.

Dismantling of size upto 250mm joints of flanged pipe in position including removing of old rubber or fibre board gaskets, bolts, nuts etc and making a flanged socket with both sides and also refixing in existing position all as specified and directed.

Taking down existing unserviceable water meter carefully and S&F, testing and commissioning of water meter of bore 250mm complete all as specified and directed.

Taking down existing unserviceable water meter carefully and S&F, testing and commissioning of water meter of bore 150mm complete all as specified and directed.

S&F in repair including testng and commissioning of PPRC pipe PN 16 (Mpa)/SDR 7.4/S5 3 layer 100 mm bore including fittings like elbow, union flange, Tee and bend etc complete all as specified and directed.

S&F in repair including testng and commissioning of PPRC pipe PN 16 (Mpa)/SDR 7.4/S5 3 layer 20 mm bore including fittings like elbow, union flange, Tee and bend etc complete all as specified and directed.

S&F in repair including testng and commissioning of PPRC pipe PN 16 (Mpa)/SDR 7.4/S5 3 layer 150 mm bore including fittings like elbow, union flange, Tee and bend etc complete all as specified and directed.

AIRCOM

rajendra agrawal