DAY TO DAY PETTY REPAIR WORKS OF B/R NATURE AT AF STN MOHANBARI AND PERIODICAL SERVICES TO OTM AND MD ACCN AT ASC AND NEPALIPATTI UNDER GE (AF) MOHANBARI

Amount

Attending day to day complaints related to joinery work such as repairs to cupboard, kitchen shelves, pelmet box, easing of doors and windows, kitchen tighting of wire mess , easing of door tightining dooe /window easing of door shutter etc including taking down of existing material as ordered/required on all working day to attend the complaint cell by rep of contractor at 0900am and report to complaint cell at every evening at 0500pm on daily basis after satisfactory complition,complete all as specified and directed. Material such as nails,screws, washers, putty/beading repair of glass with glass putty , nut & bolts upto third floor etc as per site requirement shall be included in the quoted rate. Note :- (i) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900am by rep of contractor on daily basis.The above task shall be carried out by deploying Minimum 01 No carpentor and 01 No of helper on daily basis. (ii) Every docket will submit at complaint cell on daily basis of same day at 0500 pm or early morning on next day after satisfacotry complition. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iv) Rs. 100.00/complaint shall be recovered against non attending of every complaints. (v) Material will be measured and paid separatly under respective items.

Supply only for 12 mm thick plywood, grade BWR, type BB with 05 nos ply layer fixed with screw to timber frame work of any thickness complete all as specified and directed.

Supply only in repair galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm including necessary beadings, cleats and fillets including dismantling complete all as specified and directed.

Supply only 4mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane including oil putty complete including dismantling upto third floor complete all as specified and directed.

Supply only 3mm thick acrylic sheet ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane with oil putty complete including dismantling upto third floor complete all as specified and directed.

Supply only figured glass pin headed type in square n exc 0.50 Sqm, in square or reqd shape of 4mm thick in each pane including oil putty upto third floor complete all as specified and directed.

Supply only 150mm long alumnium anodised barrel tower bolt, of extruded section complete all as specified and directed.

Supply only 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

Supply only 150mm long alumnium anodised handle cast type complete all as specified and directed.

Supply only steel plate rack of size 600x 900 x 250 mm complete all as specified and directed.

Supply only aluminium Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Supply only in repair 4mm thick Plywood, grade BWR, type BB, fixed with nails to timber frame work or in roof for monkey protection complete all as specified and directed.(Note : This item may be executed in patch work also).

Supply only Extruded aluminium alloy handles 100 mm , fabricated type, anodised complete all as specified and directed.

Running welding in repairs of hinges of MS frame door and MS window handle /hinges etc exc 9 mm but n exc 20 mm complete all as specified and directed. (Note : Welding work executed in different location as per requirement)

Supply only Floor door stopper 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply only Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

Supply only in repair Curtain rod , mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S & F for powder coated GI Snap grid system of size 605 X 605 mm for false ceiling fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the following sections complete all as specified and directed:- (i) Main Tee 28mmx24mmx0.3mm thick (ii) Cross Tee 28mmx24mmx0.3mm thick (iii) Wall angle 24mmx24mmx0.3mm thick complete all as specified and directed.

S & F 4 mm thick in repairs designer ceiling (E-board classic tiles) for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or GI sanp grid or with staples on snap grid as in ceiling with and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed.

Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

All same as per item no. 23 above but except sheeting (any thickness) complete all as specified and directed. (Note :- Old sheet shall be obtaind from item No - 01 above)

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.

All same as per item no. 4 above but except sheeting (any thickness) complete all as specified and directed. (Note :- Old sheet shall be obtaind from item No - 22 above)

Supplying and laying in repairs APP based modified water proofing polymeric membrane, reinforced with non woven polyester fabric matt (weight not less than 150 gms/sqm) of minimum 3 mm thick and minimum weighing not less than 3 kg/sqm,all as per manufacturers instructions complete all as specified and directed (Item may be executed in patch work also).

Repair/ resecuring of aluminium doors, easing & adjusting including replacement damage part and assoceries if required including taking down and refixing in same opening etc complete all as specified and directed.

Attending day to day complaints related to water supply & plumbing work such as leakage of bib cock,/pillar cock/ stop cock, angle valve of any description changing the washers, cleaning of air lock in the pipe, leaking low level or high level flushing cistern by adjusting the float valve and including removal/taking down of existing material or for refixing of same or replacement of rubber washer in PVC syphons/bath fittings and adjusting the float valve of over head tanks and leaking PVC bends/galvanised iron pipes etc as per site requirement on all working day to attend the complaint cell by rep of contractor at 0900 am and report to complaint cell at same day at 0500pm on daily basis after satisfactory complition, complete all as specified and directed. Material such as threads, washers, lead etc shall be included in the quoted rate. Note :- (i) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900am by rep of contractor on daily basis.The above task shall be carried out by deploying Minimum 01 No plumber and 01 No of helper on daily basis. (ii) Every docket will submit at complaint cell on daily basis of same day at 0500 pm or early morning on next day after satisfacotry complition. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iv) Rs. 100.00/complaint shall be recovered against non attending of every complaints. (v) Material will be measured and paid separatly under respective items.

Supply only 15 mm bore bib tap in repair, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only 15 mm bore Stop valves, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only 15 mm bore Pillar taps in repair , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply only 15 mm Brass CP wall Mixer with hand shower swan neck , cast copper alloy with capstan head chromium plated screwed down, high pressure with or without lettered hot or cold mix with long screwed shank and fly nuts screwed down for iron pipe and fixed complete all as specified and directed.

Supply only 15 mm Brass CP Wash Hand Basin mixer with , cast copper alooy with capstan head chromium plated screwed down, high pressure with or without lettered hot or cold mix with long screwed shank and fly nuts screwed down for iron pipe and fixed complete all as specified and directed.

Supply only PVC sink coupling 42 mm dia complete all as specified and directed.

Supply only CP Grating doom 125 mm dia (minimum wt 40grms) complete all as specified and directed.

Supply only 15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed complete all as specified and directed.

Supply only 15mm ball valves, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) (Make: Prayag/Shakti) complete all as specified and directed.

All as per item No. 38 here- in- before but size 20mm dia and Minimum wt (for 20mm -210gms) (Make: Prayag/Shakti)

Supply only of water tank cover for tanks of size 500 ltr or 1000 ltrs water storage tank complete all as specified and directed.

Supply only PVC seat cover for EWC of white colour complete all as specified and directed.

Supply only Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply only 15mm bore steel water tubing medium grade galvanizd with all fittings for fixed to walls, floors, roof ceiling etc including thread, solvent and etc complete all as specified and directed.

Supply only 20mm bore steel water tubing medium grade galvanized with all fittings for fixed to walls, floors, roof ceiling etc including thread, soluvent and etc complete all as specified and directed.

Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

All as per item No. 45 here- in- before but 600mm long.

Supply only GI nipple, and socket 15mm bore size complete all as specified and directed.

Supply only GI nipple, and socket 20mm bore size complete all as specified and directed.

Supply only GI Elbow, and Tee 15mm bore size complete all as specified and directed.

Supply only GI Elbow, and Tee 20mm bore size complete all as specified and directed.

Supply only Swivel shower of PTMT in repair any colour for fixing with 15mm pipe complete all as specified and directed. (Minimum weight 40gms)

Supply only CP tubular towel rail 20 mm dia D type including all (brackets ) etc complete all as specified and directed.

Supply only 32mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.

Supply and fixing 500 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed.

Supply and fixing 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 1000 Ltr capacity complete all as specified and directed.

Attending day to day complaints pertaining to different type of repairs of steel windows, handles, door springs, frame, rolling shutter garrages, repair by welding etc (run or spot welding as per site requirement) on all working day to attend the complaint cell by rep of contractor at 0900am along with welding machine, gloves, welding glass, welding rod etc and any other tools required and report to complaint cell at same day at 0500pm on daily basis after satisfactory complition, as per time to time requirement complete all as specified and directed. Note :- (i) The above task shall be carried out by deploying Minimum 01 No Welder and 01 No of helper on daily basis. (ii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iii) Contractor or his auth rep shall sign the Attendance register and Demand register daily. (iv) Rs. 100.00/day shall be recovered for non deployment of labour as per demand register. (v) Material will be measured (after fixing) and paid separtely as supply only under respective items.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

Material and labour for 5 mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces such as soffits of slabs, in patches n exc 1 sqm each finishing the surfaces fair and even complete all as specified and direccted.

M & L for 15 mm thick rendering of brick work or stone masonry surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick or concrete surfaces with cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and directed. (Note : To be executed in patch work also.)

Material and labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of new surafaces complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of Oil Bound Disterper over a coat of primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Supply & Fixing of glazed ceramic coloured /printed tiles 350x250x 7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles on verticle surface over and including 10 mm thick rendering in cement mortar 1:4 of complete all as specified and as directed.

M&L for preparation of new plstered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

Supply only 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets complete all as specified and directed.

M & L for preparation of old decorated plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered surfaces of ceiling/ false ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall by washing rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper complete all as specified and directed.

Preparation of old painted wooden surface of any description over 10 cm widths or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surface of any description over 10 cm widths or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of old decorated plastered surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion over one coat of wall care putty incl complete removal of existing treatment complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick or concrete surfaces complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces complete all as specified and directed.

M&L for preparing new surfaces and applying two coats of white wash to external wall complete all as specified and directed.

M&L for preparing new surfaces and applying two coats of distempering on walls with distemper oil emulsion white or tinted complete over chalk whitening on plastered surfaces to internal walls complete all as specified and directed.

S&F in repair water closet seat cover for EWC of white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair CP Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc as in repairs complete all as specified and directed.

S&F in repair of angle valve (stop valve) 15 mm dia CP fancy type with long screwed shank and cup, cast copper alloy, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S& F in repair Grating doom 125 mm dia with waste hole of PTMT(minimum weight 40gms) complete all as specified and directed.

S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete all as specified and directed.

S&F in repair Chromium plated shower roses 125mm size with swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet, flush pipe fixed as in repair complete jointing, connecting and making good the disturbed surfaces complete all as specified and directed.

Material and labour for 10mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.

M&L flor Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L in repair glazed ceramic tiles in vertical surfaces 300x200x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match existing surface including 10mm thick backing coat in cement mortar 1:4 including taking down existing complete all as specified and as directed. Note: Item may be reapaired to be done in patches also)

M&L for 19 mm thick perlaminated particle board, interior grade, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard with teak beading of all sides including necessary hinges, minimum one Nos of handle with each shutter and proper locking arrangement system, fixed in repair complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm dia GI pipe medium grade with all fittings complete and fixed to walls or laid in floors complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20mm dia GI pipe medium grade with all fittings complete and fixed to walls or laid in floors complete all as specified and directed.

S&F in repair 20mm bore brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 125/110 mm PVC (SWR) gully trap, jointing with solvent cement complete all as specified and directed.

Taking down chowkats or frames with shutters not exc 1.5 sqm each with shutters complete all as specified and directed.

M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and directed.

S&F 150mm Aluminium handles cast type anodised complete all as specified and directed.

S&F 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised and fixed type B-22 complete all as specified and directed.

Treatment of sunken floor shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated. (i) Demolition of concrete of any description and in any position not otherwise specifically provided for in any type of filling in sunken portion & cleaned the sunken potion incl vertical wall surface complete as specified and directed. (ii) S&F spouts of 25mm dia GI pipe light grade projecting 450mm clear of face outer a wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water including cutting holes and making good if needed complete all as specified and directed. (iii) M&L for lying of 40mm thick (min) PCC 1:2:4 typeB-0 using 12.5mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. Bottom and vertical sides shall be plastered in cment mortar 1:3, 10mm thick mixed with water proofing compound as per manufacturer instructions, Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster be carried out at the same time complete all as specified and directed. (iv) M&L for 5mm thick cment sand mortar 1:3 admixed with dluted DURAKRIT (1 Durakrit : 3 Water) at the junctions of the wall. Wet the surface with water to make it SSD condition. Applying one coat of DURAKRIT-Acrylic Polymer Modified Cementatious (PMC) slurry coating as per manufacturer specification 1:2 (1 DURAKRIT : 2 cement) by weight in the sunken floor surface, turned up and finished up to 110mm from FFL. Apply second coat of DURAKRIT-Acrylic Ploymer Modified Cementatious slurry coating as per manufacturer specification 1:2 (DURAKRIT : 2 cement) by weight over the first coat at right angles. The second coat is usally applied after first layer slurry coat has touch dried usually after 4 hrs complete all as specified and directed. (v) Test again of water tightness by ponding for 72 hours & rectify defects if any till total elimination of defects complete all as per specified and directed. (vi) M&L to fill the sunken floor with PCC 1:5:10 type E-2 using bk aggregate over the treated surface complete all as specified and directed.

S&F 40mm dia cupboard knobs brass polished fixed with nut screw and washer of mild steel bright finished complete all as specfified and directed.

M&L for non asbestos fibre cement building board, 4mm thick fixed with aluminium frame work with screw as in ceiling complete all as specified and directed.

M&L for preparation of new undecorated surface of ceiling and applying three coats of white wash complete all as specified and directed.

S&F in repair 32mm dia PVC waste pipe of 850mm length for sink/ WHB complete all as specified and directed.

M/S D G ENTERPRISE (BID ID -3077573)

S K ENTERPRISE (BID ID -3088242)

M/S R G Construction (BID ID -3089248)

RAJ BUILDER (BID ID -3088444)

M/S RK Trading (BID ID -3080465)

M/S P.K.B.CONSTRUCTION (BID ID -3088790)

HIND CONSTRUCTION (BID ID -3085999)