GE/PNH-29/2024-25

Amount

B&R PORTION:- M&L for preparation of old plastered/ un-plastered wall surfaces including brooming down or steel wire brushing, scraping down, smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots, and applying one coat of white wash on walls including cornices, pilasters etc, complete all as specified and directed.

All as per item No.01 above, but on ceiling, complete all as specified and directed.

All as per item No-01 above but applying one coat of oil bound distemper white or any tint, complete all as specified and directed

All as per item No-01 above but applying one coat of oil bound distemper white or any tint on ceiling, complete all as specified and directed.

All as per item No-01 above but applying two coats of oil bound distemper white or any tint on wall, complete all as specified and directed.

All as per item No-01 above but applying two coats of Apex paint any tint, complete all as specified and directed.

M&L for complete removal of existing treatment, preparing surfaces plastered or unplastered old surfaces but applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS- 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed.

M&L for applying two layer of wall care putty of approved make of 1mm thick on walls as per manufacturar instructions with and including rubbing by means of sand / abrasive paper to have smooth finishing to receive primer / paint, complete all as specified and directed.

M&L for preparation of old painted wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern/single shade, complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying interior texture wall painting on wall surface with stencil for smooth finish, complete all as specified and directed.

Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of bricks or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plaster or unplastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS- 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces on walls complete all as specified and directed.

M&L for Preparation of new plastered / unplastered surface of wall including cornices pilaster etc, and applying two coats of oil bound distemper, complete as specified and directed.

M&L for preparation of old or new plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smokw soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper in camouflage pattern on walls complete all as specified and directed.

E&M PORTION:- Taking down old unsv street light fittings any type from pile/ wall/ other similar situation and refixing, re-connecting the same in existing position after carrying out necessary repair/ replacement of unsv accessories to make the fittings functional, complete all as speecified and directed. Note:-Accessories required to make the fittings functional shall be measured & paid seperately as supply only under relevent items.

Supply only the following accessories to be incorporated for repair of street light fittings taken out under item No-18 above are as under :-

LED driver for street light fittings of 40 watt capacity complete all as specified and directed.

LED driver for street light fittings of 45 watt capacity complete all as specified and directed.

LED driver for street light fittings of 60/70 watt capacity complete all as specified and directed.

LED driver for street light fittings of 90/120 watt capacity complete all as specified and directed.

S&F thermo plastic street light weather proof out door type junction box of size 250mmx 200mm x 105 mm complete with 4 way connector-01 No, 6 Amps SP MCB-01 No, easily openable and having locking arrangement including incoming and out going cable holes with fixing MS clamp and water tight polymide cable gland for each connection with & including taking down old unsv junction box, complete all as specified and directed.

Supply and laying in trenches or passing through pipe or under road/culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 25 Sqmm 3.5 core including taking down old/ unsv cable any type complete all as specified and directed.

All as per Item No 25 above but 16 Sqmm 2 core complete all as specified and directed.

All as per Item No 25 above but 10 Sqmm 2 core complete all as specified and directed.

Excavation in trenches n.exc 1.5M wide and n.exc 1.50M in depth for taking up or laying of under ground cable in any type of soil and getting out complete all as specified and as directed.

Returning, filling soil in trenches including spreading levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removal excavated soil not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and as directed.

Supply and laying sand river for cushioning with layers of sand 8 cm before laying of cable and 15 cm after laying of cable (total 23 cm) in trenches, duly punning to a thickness of 18 cm complete all as specified & directed. ( Note: Thickness after punning shall be measured for payment )

Supply and laying sub-class 'B' bricks locally available bricks laid in trenches perpendicular to UG cable for cable protection complete all as specified and as directed.

S&F in repair 40mm bore galvanised steel water tubing, light grade including all fittings laid in trenches/ fixed to pole/ along wall/ floor etc for protection of cable/ strip including fixing to pole with M.S. clamp, nuts, bolts etc complete all as specified and as directed.

Supply & fix PVC insulated, 1100 volts grade, stranded aluminium conductor cable 2.5 Sqmm, twin core, connecting from Street light junction box to light fittings including taking down old/ unsv cable any type complete all as specified and directed.

S&F in repair PVC conduit/pipes 25 mm dia and fixed with the pole by clamping / saddling for protection of connecting wires, connection from junction box to light fittings, including taking down old pipe any type complete all as specified and as directed.

S&F in repair decorative gate / garden light made up of high grade unbreakable polycarbonate material suitable for & including 20 watt LED lamp (B22) fixed with & including stand post of 40mm dia GI pipe light grade, 1 mtr long and making connection with three core copper flexible cable of suitable size to light fitting complete all as specified and directed. Make:- Havells Cat Part No. LHFXBON1TN5Q014 or Equivalent cat part of make as specified in PS.

S&F in repair New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source, 0.6mtr height outdoor type fixed on wall or floor with nuts, bolts, washers or screws and making connection with three core copper flexible cable of suitable size to light fitting incl necessary steel fabricated stand upto 400 mm height & PCC work as required complete all as specified and as directed. Make: Havells Cat Part No. BAMBOOBLS8WLED830PSYMTOPC or equivalent Cat part of Make as specified in PS.

S&F Energy efficient LED street light fittings, 45 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed. Make: HAVELLS Cat Part No. ENDURAPEARLNEOSL45WLED757PASYTOPC or equivalent Cat part of Make as specified in PS.

S&F Energy efficient LED street light fittings, 60 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed. Make: HAVELLS Cat Part No. ENDURAPEARLNEOSL60WLED757PASYTOPCAST or equivalent Cat part of Make as specified in PS.

S&F Energy efficient LED street light fittings, 70 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed. Make: HAVELLS Cat Part No. ENDURAPEARLNEOSL70WLED757PASYTOPC or equivalent Cat part of Make as specified in PS.

S&F Energy efficient LED street light fittings, 90 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed. Make: HAVELLS Cat Part No. ENDURAOMNIPLUSSL90WLED757SASYTOPC or equivalent Cat part of Make as specified in PS.

Supply and fixing in repair LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. Make: Havells JETAALBAFLOODLIGHT100W or equivalent Cat part of Make as specified in PS.

Supply and fixing in repair LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. Make: Havells JETAIRISFL120WLED757APWBLTG or equivalent Cat part of Make as specified in PS.

S&F in repair LT AB cable of size 3x35 sqmm ( for phase) and 1x25 sqmm( for neutral) twisted arround the bar messenger of 1x25 sqmm, made out of aluminium stranded circular compacted conductor, XLPE insulated all as per IS: 14255, IS 398 part-IV 7098 part-I including suspension clamp with eye hook at every 35 to 40 mtr span mounted on pole by means of MS clamp complete all as specified and directed. Note: MS clamp suitable for pole for holding suspension clamp shall be measured and paid seperately.

S&F street light bracket made out of GI tubing 40mm bore, medium grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of MS Flat with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint including taking down u/s bracket any type all as specified and as directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular of size of aluminum conductor 6 sq mm stranded conductor including taking down old UNSV cable complete all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular of size of aluminum conductor 10 sq mm stranded conductor including taking down old UNSV cable complete all as specified and directed.

All as per Srl item No. 48 above but for 3 phase, 4 wire, 440 volts, 40 amps complete all as specified and directed.

S&F in repair bus bar of capacity 100 amps, 4 pole, 440 volts alongwith powder coated sheet metal enclosures incl 04 Nos of aluminium bus bar (3P+1N) mounting on on insulators complete all as specified and directed.

All as per Srl item No. 50 above but for 200 amps complete all as specified and directed.

S&F in repair digital timer switch programmable every 1 min. with breakup of weekly with 1 CO 6 years, 28 memory locations, current capacity 16 A, weekly program with 1 changeover (1 CO) total 28 programs complete all as specified and directed.

S&F in repair contactor of range 9-32 amps (01 NO + 01NC) single phase conventional/universal AC electronic coil version type suitable for street light timer DB complete all as specified and directed.

All as per Srl item No. 53 above but of range 25-45 amps (01 NO + 01NC) 3 pole complete all as specified and directed.

M&L in repair for Earthing in replacement for poles and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 600x600x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32x6mm with GI pipe, nuts, bolts and washers complete upto and PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protected steel with funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009.

S&F in repair Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, complete all as specified and directed.

M&L for Disconnecting electric & water connection to geyser of capacity 25/35/50 litr, taking down from existing position, dismantling and inspecting all the parts for its serviciability, cleaning of serviceable parts i.e. base assembly, connecting lead, thermostat, electric contact, electric wiring, indicators, safety valves etc re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Notes: (i) The defective parts to be replaced shall be measured and paid separately under relevant item No. 58 to 70 of Sch 'A' as supply only (ii) Cost of minor items i.e. screws, nuts, bolts etc shall be deemed to be included in this item

Supply only heating element of capacity 2 KW, ISI marked suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only heating element of capacity 1.5 KW, ISI marked suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only thermostat, ISI marked suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only indicator lamp suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only geyser safety valve suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only PVC pipe connection of heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature complete all as specified and as directed.

Supply only aluminium/chromium type flecxible connection, heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature complete all as specified and as directed.

Supply only inner tank made out of steel sheet conforming to IS, suitable for 25 litres capacity of geyser, vertical type complete all as specified and as directed.

Supply only inner tank made out of steel sheet conforming to IS, suitable for 35/50 litres capacity of geyser, vertical type complete all as specified and as directed.

Supply only proper glass wool filling in between inner and outer tank of geyser of 25/50 litrs capacity of any make/type complete all as specified and as directed.

Supply only non return valve made out of brass fixed in vertical position of suitable dia complete all as specified and as directed.

Supply only new base assembly with inlet and outlet pipe made out of steel sheet with gasket and proper size of nuts, bolts and washer etc suitable for 25 litres capacity of geyser complete all as specified and as directed.

Supply only new base assembly with inlet and outlet pipe made out of steel sheet with gasket and proper size of nuts, bolts and washer etc suitable for 35/50 litres capacity of geyser complete all as specified and as directed.

M&L for complete servicing and repair of solar water heating system of any capacity, servicing, cleaning or replacement of all accessories and re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Note: Unsv accessories will be measured and paid seperately under respective items No. 72 to 78 of Sch as supply only

Supply only solar water heater collector FPC type screw less technology suitable for existing solar water heating system, ISI marked complete all as specified and as directed. Make Recold or equivalent as approved By GE.

Supply only solar collector glass suitable for existing solar water heating system complete all as specified and as directed.

Supply only Glycol for solar water heating system complete all as specified and as directed.

Supply only solar collector with copper brazing complete all as specified and as directed.

Supply only heating element of capacity 3 KW, ISI marked suitable for existing solar water heating system complete all as specified and as directed.

Supply only make up tank of 500 Ltr capacity for existing solar water heating system complete all as specified and as directed.

Supply only gasket and end joints suitable for existing solar water heating system complete all as specified and as directed.

M&L for complete servicing and repair of RO Plant of any capacity, servicing, cleaning or replacement of all accessories and re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Noe:- Unsv accessories will be measured and paid seperately under respective items No. 80 to 86 of Sch as supply only.

Supply only micron cartridge filter sponge 2" x 10" of 4 micron suitable for existing RO plant complete all as specified and directed.

Supply only RO membrane concealed type, 75 GLD suitable for existing RO plant complete all as specified and directed.

Supply only pressure booster pump suitable for existing RO plant, 24 volt DC complete all as specified and directed.

Supply only primary sedimentation filter pressure booster pump suitable for existing RO plant, complete all as specified and directed.

Supply only post silver activated carbon cartidge for improvement of water taste, complete all as specified and directed.

Supply only SMPS 24 volt DC adopter suitable for any type/capacity of RO water purifier, complete all as specified and directed.

Supply only solenoid switch (water level controller) suitable for any type/capacity of RO water purifier, complete all as specified and directed.

Supply and fix in replacement of thermostat switch suitable for solar water heater of size 150 litre to 300 litre, complete all as specified and directed. Note: Make and model of thermostat shall be as per sample available at site.

Cleaning of storage tank of solar heating system of any capacity/ size alongwith complete glass tubes for inside/outside solar panel for smooth and efficient function of systemcomplete all as specified and directed. Note:- (a) Any damage including glass parts/solar tubes/solar panel as solar water heating system during the cleaning process will be make good/replaced by contractor, cost of same deemed to be included in the rate quoted (b) All rubber parts or minor hidden parts such as PVC elbow, joint, plug etc shall be replaced by contractor for efficient functioning of system and cost of same deemed to be included in the rate quoted

Removing of old paint from the complete structure related to solar water heating system, by scrubbing with emery paper and applying one coat of red oxide primer and two coats of synthetic namel paint complete all as specified and directed.

Cleaning of HDPE water storage tank from inside and outside of for smooth and efficient function of system & removing scale/dirt from inlet/outlet pipe complete all as specified and directed.

Cleaning of solar collector complete in all aspects incl testing complete all as specified and directed.

M/S BADRI NATH GUPTA (BID ID -3091000)

NATIONAL TRADING COMPANY (BID ID -3077986)

ABINASHI ENTERPRISES (BID ID -3093971)