Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.3 Cr
EMD Value
₹4.7 L
Closing Date
26 Oct 2026, 5:00 pm6d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
SM_TENDER CELL
GNIDA OFFICE
Installation of RCC Jersey Barrier and Chain Link Fencing along Kot Escape drain near Village Dadha, Greater Noida.
2026_GNIDA_1195828_4
SM/(E-TENDER CELL)/2026/822 DATED-09.10.2026
Open Tender
Civil Works
Percentage
180 days
GREATER NOIDA
REFER TENDER DOCUMENT
5 documents required · 5 mandatory
₹4,110
₹4.7 L
13 Oct 2026
13 Oct 2026
28 Oct 2026
13 Oct 2026
26 Oct 2026
13 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineerin- charge. : All kinds of soil (DSR-2023/2.6.1) | 2,023.86 | Cum | 141.4 | ₹2,86,173.8 |
| 2 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. (DSR-2023/2.25A) | 4,273.5 | Cum | 397.5 | ₹16,98,716.25 |
| 3 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.: All kinds of soil (DSR-2025/2.28.1) | 2,355 | Sqm | 16.1 | ₹37,915.5 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR-2023/4.1.8) | 79.48 | Cum | 6,548 | ₹5,20,435.04 |
| 5 | Supply and installation of precast reinforced cement concrete Jersey barrier of grade M-35 including reinforcement, formwork, mixing, transporting and placing of concrete, vibrating, curing, finishing, making necessary cutout/holes of required sizes for services, yard handling, stacking and installation at site all complete as per IS 11447:1985 and as per approved shop drawings and design mix, as per the direction of Engineer-in-Charge. Including transportation from factory/yard/manufactoring unit to fixing site. M.R./AR | 270 | Nos | 41,700 | ₹1,12,59,000 |
| 6 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-2023/13.80) | 1,811.97 | Sqm | 93 | ₹1,68,513.21 |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work (DSR-2023/13.61.1) | 3,394.03 | Sqm | 89.85 | ₹3,04,953.6 |
| 8 | Cartage of ballast, Kankar Coal, grit or sand including loading & unloading but excluding stackings on pakka roads: 5.0 Km. (SOR-25/Ch-4/4.02/232(a)/4.01) | 978.71 | Cum | 127.8 | ₹1,25,079.14 |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR-2023/10.25.2) | 18,052.78 | kg | 113.85 | ₹20,55,309 |
| 10 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.: Made of G.I. wire of dia 4 mm (DSR-2023/16.70.1) | 1,571.22 | Sqm | 686.45 | ₹10,78,563.97 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.13 MB
PreQ_RCCjersey_Dadha.pdf
Tender Documents • 1.02 MB
BOQ_2258924.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .