Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹22 L
EMD Value
₹2.2 L
Closing Date
24 Oct 2026, 12:00 pm5d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE, CD1 PWD UNNAO
EE, CD1 PWD UNNAO
Road Safety Work in Bigram-Unaao-Prayagraj Road SH-38 km-34 to Ranipur Grant Via Chak Hanuman Haraipur ODR CH-0-300 to 10-560
2026_CEUCZ_1198740_5
3591/A-8/E-tender/2026-27 date 07-10-2026
Open Tender
Civil Works
Fixed-rate
180 days
UNNAO
Please refer Tender documents.
2 documents required · 2 mandatory
₹944
₹2.2 L
Yes
19 Oct 2026
19 Oct 2026
24 Oct 2026
19 Oct 2026
24 Oct 2026
19 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 the finised surface to the level ,uniform and free from streaks and holes. (Thermoplastic bar marking) | 2,411 | sqm | 587 | ₹14,15,257 |
| 2 | Providing and laying hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 the finised surface to the level ,uniform and free from streaks and holes. | 148.5 | Sqm | 798 | ₹1,18,503 |
| 3 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing | 10 | Nos | 5,970 | ₹59,700 |
| 4 | Supply, fixing & eraction of built up Cantilever Structure 2.40 m span comprising of one vertical posts of 7.30 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. | 2 | Nos | 1,19,700 | ₹2,39,400 |
| 5 | Retro-Reflective Sheeting type-xi with 4 mm thick ACM Single Side Providing And fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 5 mm both side aluminium skin aluminium composite pannel face to be filly coverd with high intensity prismatic sheeting type IV as per IRC-67.2012 ratro reflective sheeting with back frame MS angle of 35x35x5 mm legendes,letters,numerrais and borders etc should be as per Morth specification No-801.3.7. The sheeting shall have a prressure-sensitive Addeshive of the aggrassive tack type requring no heat,solvent other preparation for adhesion to smooth clean surface , in a manner recommended by the sheeting manufacturer.The ACM(Aluminium Composite Materials) shall be fixed on the back frame MS Angle with riveting . Micro Prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be pressure fixed. The Retro reflective sheeting shall be tested for a certficate of having the sheeting tested for cofficient of retro reflection ,daytime colour and luminance,shrinkage,flexbility,liner removal adhesion impact resistance,specular gloss and fungus resistance 3 year outdoor weathering and its having passed these tests shall be obtained from International /Government Laboratory Institute by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artifiial accelerated weathering requirments from a reputed laboratory in india can be accepted provisnolly.In such a Situation,the Employer/client, if so desires could sheek for a performance gurantee which would be released after reciept of certificate meeting the requirment the requirment of three years outdoor weathering of the sheeting as per IRC 67-2012 indian condition within 3year ..(Including Labour Cess And Excluding G.S.T.) | 43.2 | sqm | 6,300 | ₹2,72,160 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.22 MB
Tendernotice_2.pdf
PDF • 1.04 MB
BOQ_2265436.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .