Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-AOC SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹11.3 L+₹3.8 L (50.2%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹20,500
Closing Date
19 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL DHANU KUMAR RAI
GARRISON ENGINEER DAMAN TAT RAKSHAK VIHAR DALWADA NANI DAMAN POST DAMAN (UT) PIN 396210
REPAIR AND MAINTENANCE OF WATER PUMP SETS, CONTROL PANELS WATER PIPE LINES VALVE CLEANING OF UG SUMP AND ASSOCIATED WORKS AT POWAI BORIVALI WORLI CG MALAD CGSD MANKHURD UNDER GE DAMAN
2022_MES_569492_1
8660/E8
Open Tender
Civil Works
Item Rate
330 days
GARRISON ENGINER DAMAN
Class E and Category b(i)
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER DAMAN
₹20,500
16 Feb 2023
16 Dec 2022
23 Jan 2023
16 Dec 2022
19 Jan 2023
31 Dec 2022
Amount
Taking out unserviceable submersible pump set 3 phase, 415 volts, 50 Hz of any capacity/type/make including vertical column GI pipes of any size alongwith submersible cable from existing borewell at any depth and kept in safe custody for reinstallation after repairs and including lowering the submersible pump set into the borewell duly reconnecting and jointing of new or taken out vertical column GI pipes of any length along with new or taken out submersible cable by providing water proof jointing complete carefully by using necessary chain pulley /T&P / tripod etc complete all as specified and directed. . Note :- (i) New column GI pipes and submersible cable will be measured and paid separately as Supply only, if required.
Dismantling the submersible pump set of capacity 3 HP to 5 HP, 3 Phase, 415V, 50Hz of any type/make and carrying out servicing, overhauling, greasing and examine carefully, repairs and replacement of minor spare parts such as pump shaft key, rotor key, sand guard, pump fixing stud, oil seal, neck ring, guide vane, adopter bearing bush, suction strainer, nuts, bolts and washers etc and including replacement of spares viz: Counter thrust bearing, thrust bearing with CI housing, pump sleeves, motor bearing bush, impeller radial flow of stainless steel, impeller mix flow SS, revolving plate, cable etc. and assembling and refixing of pump and motor, including painting to pump and motor with two coats of anti corrosive paint over a coat of red oxide primer after preparation of surfaces. Testing after repair, complete all as specified and directed. Note :- (i) Counter thrust bearing, thrust bearing with CI housing, pump sleeves, motor bearing bush, impeller radial flow of stainless steel, impeller mix flow SS, revolving plate, cable if required shall be measured and paid separately as "supply only" (ii) The rate quoted by contractor shall deemed to be included of all replacement of minor spare parts other than supply only. (iii) The cost of transport to civil trade shop for repairs is deemed to be included in rate quoted by the contractor ... (iv) Labour charges for replacement of items under supply only are deemed to be included in rate quoted by the contractor.
Supply only counter thrust bearing suitable for submersible pump sets of capacity 3 HP to 5 HP complete all as specified and directed
Supply only thrust bearing with CI housing suitable for submersible pump sets of capacity 3 HP to 5 HP complete all as specified and directed
Supply only pump sleeves suitable for submersible pump sets of capacity 3 HP to 5 HP complete all as specified and directed.
Supply only motor bearing bush suitable for submersible pump sets of capacity 3 HP to 5 HP complete all as specified and directed.
Supply impeller radial flow stainless steel suitable for submersible pump sets of capacity 3 HP to 5 HP complete all as specified and directed.
Supply only impeller mix flow stainless steel suitable for submersible pump sets of capacity 3 HP to 5 HP complete all as specified and directed.
Supply only revolving plate suitable for submersible pump sets of capacity 3 HP to 5 HP complete all as specified and directed.
Dismantling the centrifugal pump set of capacity 3 HP to 5 HP, 3 phase, 415 volts, 50 Hz of any type/make and carrying out servicing, overhauling, greasing and examine carefully, repairs and replacement of minor spare parts such as gaskets of any type, gland rope, shaft key, terminal board, mechanical seal, shaft sleeve, gland plate, nuts, bolts and washers and including replacement of spares Viz: copuling set with rubber bush, gun metal impeller, ball bearing (D.E), ball bearing (N.D.E), stainless steel shaft, external fan, delivery flange, suction flange, bearing housing and ressembling, including painting to pump set and base frame with two coat of synthetic enamel paint of existing colour after preparation of surfaces to achieve smooth finish including reconnecting of pipes and electric connection to existing system and testing complete all as specified and directed. Note :- (i) Copuling set with rubber bush, gun metal impeller, ball bearing (D.E), ball bearing (N.D.E), stailess steel shaft, external fan, delivery flange, suction flange, bearing housing, if required shall be measured and paid separately as supply only. (ii) The rate quoted by contractor shall deemed to be included of all replacement of minor spare parts other than supply only. (iii) The cost of transport to civil trade shop for repairs ideemed to be included in rate quoted by the contractor. . (iv) Labour charges for replacement of items under supply only are deemed to be included in rate quoted by the contractor
Supply only coupling set with rubber bush for centrifugal pump set 3 HP to 5 HP complete all as specified and directed.
Supply only Gun metal impeller for centrifugal pump set 3 HP to 5 HP complete all as specified and directed.
Supply only Ball bearing (D.E) for centrifugal pump set 3 HP to 5 HP complete all as specified and directed.
Supply only Ball bearing ( N.D.E) for centrifugal pump set 3 HP to 5 HP complete all as specified and directed.
Supply only Stainless steel shaft for centrifugal pump set 3 HP to 5 HP complete all as specified and directed.
Supply only External fan for centrifugal pump set 3 HP to 5 HP complete all as specified and directed.
Supply only Delivery flange for centrifugal pump set 3 HP to 5 HP complete all as specified and directed.
Supply only Suction flange for centrifugal pump set 3 HP to 5 HP complete all as specified and directed.
Supply only Bearing housing for centrifugal pump set 3 HP to 5 HP complete all as specified and directed.
Dismantling the centrifugal pump set of capacity 7.5 HP to 15 HP, 3 phase, 415 volts, 50 Hz of any type/make and carrying out servicing, overhauling, greasing and examine carefully, repairs and replacement of minor spare parts such as gaskets of any type, gland rope, shaft key, terminal board, mechanical seal, shaft sleeve, gland plate, nuts, bolts and washers and including replacement of spares viz: coupling set with rubber bush, gun metal impeller, ball bearing (D.E), ball bearing (N.D.E), stailess steel shaft, external fan, delivery flange, suction flange, bearing housing and ressembling, including painting to pump set and base frame with two coat of synthetic enamel paint of existing colour after preparation of surfaces to achieve smooth finish including reconnecting of pipes and electric connection to existing system and testing complete all as specified and directed. Note :- (i) Coupling set with rubber bush, gun metal impeller, ball bearing (D.E), ball bearing (N.D.E), stailess steel shaft, external fan, delivery flange, suction flange, bearing housing, if required shall be measured and paid separately as supply only. (ii) The rate quoted by contractor shall deemed to be included of all replacement of minor spare parts other than supply only. (iii) The cost of transport to civil trade shop for repairs ideemed to be included in rate quoted by the contractor. .. (iv) Labour charges for replacement of items under supply only are deemed to be included in rate quoted by the contractor
Supply only coupling set with rubber bush for centrifugal pump set 7.5 HP to 15 HP complete all as specified and directed
Supply only Gun metal impeller for centrifugal pump set 7.5 HP to 15 HP complete all as specified and directed.
Supply only Ball bearing (D.E) for centrifugal pump set 7.5 HP to 15 HP complete all as specified and directed
Supply only Ball bearing ( N.D.E) for centrifugal pump set 7.5 HP to 15 HP complete all as specified and directed.
Supply only Stainless steel shaft for centrifugal pump set 7.5 HP to 15 HP complete all as specified and directed.
Supply only External fan for centrifugal pump set 7.5 HP to 15 HP complete all as specified and directed.
Supply only Delivery flange for centrifugal pump set 7.5 HP to 15 HP complete all as specified and directed.
Supply only Suction flange for centrifugal pump set 7.5 HP to 15 HP complete all as specified and directed.
Supply only Bearing housing for centrifugal pump set 7.5 HP to 15 HP complete all as specified and directed.
Material and Labour for rewinding of submersible motor of capacity of 3 HP to 5 HP, 3 phase, 415 volts, AC of any type/make with copper winding wire with polywrap of existing gauge and number of turns including removing old burnt out winding carefully without damaging to other parts and testing complete all as specified and directed.
Material and Labour for rewinding of centrifugal motor of capacity of 5 HP to 7.5 HP, 3 phase, 415 volts, AC of any type/make with copper winding wire with polywrap of existing gauge and number of turns including removing old burnt out winding carefully without damaging to other parts and testing complete all as specified and directed.
Material and Labour for rewinding of centrifugal motor of capacity of 7.5 HP to 15 HP, 3 phase, 415 volts of any type/make with super enamelled copper winding wire of existing gauge and number of turns including removing old burnt out winding carefully without damaging to other parts and testing complete all as specified and directed .. Note for item No's 30 to 32 :- The cost of transport to civil trade shop for rewinding is deemed to be included in rate quoted by the contractor
Removing of old unserviceable DOL starter from existing position after disconnecting of electric connection and supply and fix new DOL starter three phase, 415 volts, 50 Hz suitable for 1HP to 3HP pumpset complete with inbuilt accessories such as contactor, relay, timer etc and fully prewired in sheet steel enclosure and connecting to the existing system including testing complete all as specified and directed. Make :- L&T/Siemens/Crompton
Removing of old unserviceable DOL starter from existing position after disconnecting of electric connection and supply and fix new DOL starter three phase, 415 volts, 50 Hz suitable for 5HP pumpset complete with inbuilt accessories such as contactor, relay etc and fully prewired in sheet steel enclosure and connecting to the existing system including testing complete all as specified and directed
Removing old unserviceable Star-delta starter from existing position after disconnecting of electric connection and supply and fix new fully automatic star delta starter three phase, 415 volts, 50 Hz suitable for 7.5 to 15 HP pumpset complete with inbuilt accessories such as contactor, relay, timer etc and fully prewired in sheet steel enclosure and connecting to the existing system including testing complete all as specified and directed. Make :- L&T/Siemens/Crompton
Removing the unserviceable single phasing preventor after disconnecting of electric connection and supply and fix new single phasing preventor 415V, AC, 50Hz suitable for pumpset upto 15 HP and reconnecting of electric cables and testing complete all as specified and directed Make : Minilec / L&T / Siemens
Supply and Fix LED phase indicating lamp R-Y-B colour as required at site complete with base holder suitable for AC, 240 volts and testing including removing of old unserviceable lamps complete all as specified and directed. Make : Minilec / L&T / Siemens/AE
Supply and Fix digital type voltmeter 0-500 volts range, flush type, AC, 50Hz in existing panel boards after disconnecting of cables and testing including removing of unserviceable voltmeter complete all as specified and directed. Make : Minilec / L&T / Siemens /AE
Supply and Fix digital type ammeter 0-50 Amps range, flush type with appropriate CTs, AC, 50Hz in existing panel boards after disconnecting of cables and testing including removing unserviceable item complete all as specified and directed. Make :- AE / L&T / Secure / Enercon
Supply only submersible cable 3 core , 4 sqmm copper conductor multistranded, 1100 volts grade, flat type, PVC insulated, sheathed and testing, complete all as specified and directed. Make :- Finolex / Plaza / Polycab / Havells
Supply only submersible cable 3 core, 6 sqmm copper conductor multistranded,1100 volts grade, flat type, PVC insulated, sheathed and testing complete all as specified and directed. Make :- Finolex / Plaza / Polycab / Havells
Material and labour for fabrication of duct cover made out of mild steel chequerred plate of 7mm thick with provision of lifting handles, fire points, ladders, pipe supports and bracings etc made out from mild steel angle iron, channel, flat iron of suitable sizes including and welding as per site requirement and carry out two coat of synthetic enamel paint of red colour to fire points and grey colour to ladder, supports,duct cover etc over a red oxide primer including removing old rusted unserviceable items complete all as specified and directed..
Supply and fix in repair MCBs, SP 6-32 Amps,10KA,'C' series, 240 volts and , complete all as specified and directed. Make :- L&T / Havells / Schneider
Supply and fix in repair MCBs, TPN 63 Amps,10 KA ,'C' series, 415 volts , complete all as specified and directed. Make :- L&T / Havells / Schneider
S & F Pressure gauge 4" dial 0-21 kgs rating with taking down old u/s pressure gauge of any type complete all as specified and as directed.
M&L for Repair of foot valve 50 mm to 100 mm size (As per site) after disconnecting & removing the foot valve from balancing tank, and refitting/relaying after rectification by replacing heavy duty leather gasket, nuts & bolts if any complete all as directed by Engr-in-Charge
M & L for detecting water leakage/blockages in underground water pipe lines, turning Off/On water and draining the system as required, with necessary excavation at location of leakage/blockage and carrying out repair of GI/CI pipe of any size with tightening of loose connection, removing & cleaning blockage, replacement of u/s fittings & repair/replacement of joints, all as specified and direted by Engineer In Charge Note: 1. Excavation & Earthwork, Additional Pipe, Joint and jointing material shall be included in the quoted rate. 2. GI / CI fittings such as bends, elbows, tees, reducers, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc of any size shall be included in the quoted rates.
Supplying , Laying and testing galvanised steel tubing of size 50 mm dia "medium grade" in any lengths with all GI fittings such as bend, tee, short piece, socket, union, nipple, connector, elbow etc and laid in trenches / on wall /floor / road cross etc and including removing/taking down of old unserviceable pipes and fittings , complete all as specified and directed . Make :- Jindal / Tata / Surya prakash
Supplying , Laying and testing galvanised steel tubing of size 40 mm dia "medium grade" in any lengths with all GI fittings such as bend, tee, short piece, socket, union, nipple, connector, elbow etc. laid in trenches / on wall /floor / road cross etc and including removing/taking down of old unserviceable pipes and fittings , complete all as specified and directed . Make :- Jindal / Tata / Surya prakash
Supplying , Laying and testing galvanised steel tubing of size 25 mm dia "medium grade" in any lengths with all GI fittings such as bend, tee, short piece, socket, union, nipple, connector, elbow etc and shall be laid in trenches / on wall /floor / road cross etc and including removing/taking down of old unserviceable pipes and fittings , complete all as specified and directed Make :- Jindal / Tata / Surya prakash
Cutting existing Galvanised iron pipes of 40mm or 50mm dia and screwing existing steel tubing for alterations or additions complete all as specified and directed.
Supply, fixing, jointing and testing, non return valve 50 mm dia, gun metal body, screwed ends, suitable for GI pipe or fittings and testing including removing old unserviceable item complete all as specified and directed. Make:- KIRLOSKER / LEADER /BIR / VENUS
Taking out the unserviceable gate valve of any type and supply and fix gun metal gate valve of size 50 mm dia with iron wheel head screwed both ends suitable for iron pipes/fittings complete all as specified and directed Make:- KIRLOSKER / LEADER /BIR / VENUS.
Taking out the unserviceable gate valve of any type and supply and fix gun metal gate valve of size 40 mm dia with iron wheel head screwed both ends suitable for iron pipes/fittings complete all as specified and directed Make:- KIRLOSKER / LEADER /BIR / VENUS.
Taking out the unserviceable gate valve of any type and supply and fix gun metal gate valve of size 25 mm dia with iron wheel head screwed both ends suitable for iron pipes/fittings complete all as specified and directed Make:- KIRLOSKER / LEADER /BIR / VENUS.
M & L for Preparation of old painted surfaces and applying two coats of synthetic enammel paints as directed by Engineer-in-Charge on external surfaces of water pipe lines, chambers, pump, motors with brush application complete all as specified and directed by Engr-in-charge.
Cleaning the semi underground reservoir of cap upto 45000 Ltrs by draining the complete water and brushing the surface with iron brush and removing the complete mud/ silt and and washing the complete inner surface of the tank to the entire satisfaction of Engineer-in-Charge and writing the date of cleaning on surface of tank with white synthetic enamelled paint on black background including covered the opening hole of tank with chicked wire mesh with iron frame, hinges and locking arrangement complete all as directed by Engineer-in-Charge. Note: (i) Each tank at different location. (ii) T&P, material, labour involved in cleaning shall be arranged by the contractor without any extra cost to the department.
M & L for carry out water quality anyalsis for bacterial, chemical and biological analysis including for collection of water samples from the Pump House at Powai, Worli, Borivali or form location as specified by Engineer-in-charge and testing from Govt approved testing laboratory, submitting of report from minium following parameters . (a) Turbudity (NTU) (b) pH (c ) Total Hardness as CsCO2(mg/l) (d) Iron as Fe(mg/l) (e) Magnesium as Mg (mg/l) (f) E-coli or thermotolerant coliform bacteria (g) Remarks of Govt testing lab . Notes: 1. Saperate water samples should be collected & tested for Each location as specified above (03 Locations Every 4 Months) 2. Not Carrying out water test/Non submission of water test report in respective month will impose penalty at the two times of quoted rates.
Material and Labour for construction of brick masonry valve chamber 900 x 900 x 900 mm (internal dimensions), 15 cm thick foundation by using PCC 1:4:8 (type D-2), brick work in cement mortor 1:6,10 mm thick plaster internally and 15 mm thick externally in CM 1:4 above ground level, 6 mm thick MS sheet cover with hinges, with hold fasts and locking arrangement fixed to angle iron frame made out of 40mmX40mmX6mm complete with two coat of synthetic enamel paint over one coat of red oxide primer on all metal works and two coat of white wash on all plastered surfaces of valve chamber including excavation, earth work in any strata including disposal of surplus soil to a distance of not exc 50 mtr complete all as specified and directed
Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.
Returning filling in soil including spreading leveling watering and well rammimg in layer not exceeding 25 cm complete all as specified and directed.
Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed
Cutting of existing bituminous surface/PCC hard standing by using mechanical method of any type for laying of pipe and making good of disturbed surfaces to match with adjoining surface complete all as specified and directed. Note:-PCC for making good shall be measured and paid separately)
Material and Labour for for PCC 1:3:6, type C2 (40 mm graded stone aggregate) as in foundations / making good of disturbed surfaces / filling mass concrete complete all as specified and directed
Supply and fixed in repairs, gun metal foot valve 40/50 mm dia complete in all respect all as specified and directed.
Radha Engineering Services
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .