DAY TO DAY MAINT OF B/R NATURE RELATED TO COMPLAINTS IN TECHNICAL AREA AND E/M NATURE RELATED TO COMPLAINTS IN BASRA/IN-LIVING/MES AND TECHNICAL AREA AT AF STN HASIMARA

Amount

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., compelete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backin), removing serviceable tiles to store and rubbish off the premises, complete as specified and directed.

M&L 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces finished surfaces fair and even, complete all as specified and directed.

M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.

M&L for rendering 5mm thick in CM (1:3) on fair faces ceiling surfaces, rendering finished even and smooth (without using extra cement), complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1.5 to 2mm thick wall care putty to obtain smooth finish, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation newly plastered surfaces of wall and applying two coats of 100% premium acrylic smooth exterior emulsion paint alkali & fungal resistance of shade deep green/camouflage pattern over a coat of exterior emulsion primer, complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

All as per item No 10.00 here-in before but as in skirting/dado over and including rendering 10mm thick in CM (1:4) as backing coat to receive wall tiles, complete as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm/450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering back coat in CM (1:4), complete all as specified and directed.

Hacking out old broken glass any thickness size quality or description from metel frame/aluminium frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed.

M&L for 3mm thick, sheet glass ordinary, quality and glazing with oil putty or wooden beading in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed.

M&L for 5.5mm thick, sheet glass ordinary, quality and glazing with oil putty or wooden beading in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed.

S&F in reapair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

Taking down anodised aluminium door shutters and refixing in the same opening including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (die cast) body designation No 1, universal type, suitable for door shutters 851 to 1000mm in width and of weight between 61 to 81 Kg, complete all as specified and directed.

S&F for 605 x 605mm GI frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, hanger with 4-6mm dia GI (length as required) adjusting level fixed to roof slabs/truss by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expension hold fast evers 12.5mm dia 40mm long including providing 4mm thick non asbestos fibre cement building board fixed or laid/ inserted to GI framework with screws, for fixing 600mm x 600mm grid, including taking down old unserviceable ceiling board including cover fillets complete all as specified and directed.

S&F in repair 4mm non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/aluminium framework with screws or with staples on existing snap grid, complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each and refixing in same opening, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting/galvalume sheet, any gauge, thickness, including nainital or similar pattern roof coverings including ridges hips valleys as in roof covering, complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall/valley gutters/ridges etc. fixed with self tapping screws, complete all as specified and directed.

S&F in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 100mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair butt hinges of size 100mm, medium weight cold rolled mild steel, complete all as specified and directed.

S&F in repair 150mm long aluminium handle, cast type, anodised, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F 16mm dia CPVC pipes SDR-11 & plain CPVC, SDR 11, fittings complete on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, End plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F 20mm dia CPVC pipes SDR-11 & plain CPVC, SDR 11, fittings complete on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, end plugs, etc and with CPVC solvents cement, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting n. exc 10cm girth, complete all as specified and directed.

S & F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valve high pressure of PTMT (minimum weight 210 gms) with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.

S&F in repairs of 15mm bore bib taps, chromium plated 2 way, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity exc 500 ltr & n. exc 1000 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on dd/mm/yy" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity exc 250 ltr & n. exc 500 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on dd/mm/yy" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 580 x 450mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc, complete all as specified and directed.

S & F in repair vitreous china urinal, bowl type flat back of size 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader of PTMT for fixing with 15mm bore pipe, providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plug with and including 60mm long brass screws, pointing around urinal back, complete all as specified and directed.

S&F in repair senser for urinal including 04 Nos. batteries of 1.5 volt each, complete all as specified and directed.

S&F in repair EWC vitreous china wash down water closet pan, white including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover and flushing cistern & flush pipe including making good damged/distrubed surfaces, complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover but excluding flushing cistern & flush pipe including making good damged/distrubed surfaces, complete all as specified and as directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let, ball valve, float and handle, complete all as specified and directed.

S&F in repair 32mm bore waste fittings, brass, chromium plated for sinks, basins, etc. with long screwed anks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S & F in repair 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed.

S&F in repair of 15mm bore bib taps, cast copper alloy with chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed.

S&F in repair 15mm bore, stop valves, cast copper alloy, chromium plated, with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends iron pipe or for unions, complete all as specified and directed.

S&F 15mm CP mixer for mixing hot & cold water screwed down for iron pipe and mixed , complete all as specified and as directed.

S&F in repair CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repairs for 15mm dia pipe, health faucet (ABS Body) mild steel chromium plated suitable with 1.25 metre long flexible tube and ABS wall hook including makeing connection and fixed in position, complete all as specified and directed.

S&F in repair towel rail, 600mm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms), complete all as specified and directed

S&F in repair towel ring PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms), complete all as specified and directed

S&F in repair shelf PTMT of size 450mm fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms), complete all as specified and directed

S&F in repair shower rose 125mm size, brass, chromium plated, including fixing to steel pipe or union, complete all as specified and directed.

S&F 140mm grating doom of PTMT (minimum wight 50 gm), complete all as specified and as directed.

S&F in repair 100mm dia cast iron Nahani trap with grating including jointing to waste pipe fixed in PCC (1:2:4), type B-1, compelete all as specified and directed.

S & F in repair 110mm bore PVC SWR pipe, single socketed, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed.

S&F in repair of 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F in repair of 110mm bore, PVC (SWR) junction single T, complete all as specified and directed.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLSH) size 1.5 sqmm drawn in and including PVC casing and caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet / modular plate incl continous earth wire of PVC insulated unsheathed, FRLSH multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly for one light/fan point controlled by one, one way switch single pole including taking down old unserviceable point wiring, complete all as specified and directed.

All as per item No 65.00 here-in before but one 3 pin 5 Amps socket outlet on same board controlled by other switch, complete all as specified and directed.

All as per item No 65.00 here-in before but one 3 pin 5 Amps socket outlet on the independent board controlled by other swtich, complete all as specified and directed.

All as per item No 65.00 here-in before but one 3 pin 5 Amps socket outlet independent but below the switch board of light points in the same vertical plate, complete all as specified and directed.

All as per ser item No. 65.00 here in above but for one 16 Amp 3/5 pin switch socket outlet independent point including PVC cable 4 Sqmm FRLSH type copper stranded conductor along with 4 Sqmm continious PVC insulated unsheathed standard copper conductor cable FRLSH type for as earth wire, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including concealed, rigid PVC conduit (ISI marked) not less than 20mm dia, medium grade, including all conduit accessories with and including concealed modular metal box of suitable size for mounting modular switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 70.00 here-in before but for one 5 Amps switch socket point on the same board, complete all as specified and directed.

All as per item No 70.00 here-in before but for 5 Amp switch socket point on independent board, complete all as specified and directed.

All as per item No 70.00 here-in before but with 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLSH type for one 15 Amp 3 pin / 5 pin socket outlet point including PVC insulated 4.0 Sqmm FRLSH type copper multi stranded conductor as earth wire, complete all as specified and directed.

S&F PVC casing/caping oval type of size 16mm complete with saddle clip, bend, elbow, tee etc as per site requirement, complete all as specified and directed.

S&F PVC casing/caping oval type of size 20mm complete with saddle clip, bend, elbow, tee, etc, as per site requirement, complete all as specified and directed.

S&F PVC casing/caping oval type of size 25mm complete with saddle clip, bend, elbow, tee etc as per site requirement, complete all as specified and directed.

S&F in replacement cable, PVC insulated, unsheathed with flexible multistranded copper conductor (FRLSH) of size 1.5 Sqmm, complete all as specified and directed.

S&F in replacement cable, PVC insulated, unsheathed with flexible multistranded copper conductor (FRLSH) of size 2.5 Sqmm, complete all as specified and directed.

S&F in replacement cable PVC insulated unsheathed with flexible multistranded copper conductor (FRLSH) of size 4 Sqmm, complete all as specified and directed.

S&F in repair switch piano flush button single pole, one way 6 amps 240 volts, complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin 6 and 16 Amp, flush type, complete all as specified and directed.

S&F in repair switch piano flush button single pole one way 16 Amps 240 volts, complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin 6 Amp flush type, complete all as specified and directed.

S&F in repair switch and socket combination 2 in 1, 6A flush type, complete all as specified and directed.

S&F in repair switch and socket combination 5 in 1, 6A/16A flush type, complete all as specified and directed.

S&F in repair bell push, flush type 5 Amp, complete all as specified and directed.

S&F in repair stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan, complete all as specified and directed.

S&F in repair lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F in repair modular switches, 1 way, 10 Amp, 1 module, complete all as specified and directed.

S&F in repair modular switches, 1 way, 16 Amp, 1 module, complete all as specified and directed.

S&F in repair modular switch, 2 way, 10 Amp, 1 module, complete all as specified and directed.

S&F in repair modular bell push 6A, 1 module, complete all as specified and directed.

S&F in repair modular socket 6A, 2/3 pin combined 2 module, complete all as specified and directed.

S&F modular socket 6A/16A, 2/3 pin combined 2 module, complete all as specified and directed.

S&F in repair modular fan regulator 120 W, 2 module, complete all as specified and directed.

S&F in repair modular USB charger with 2 USB ports (2M) with cover plate & inner frame, supply voltage 160-240V~ 50-60Hz, Output - 5V DC, 2A, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 2 module, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 3 module, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 4 module, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 8 module, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 12 module, complete all as specified and directed.

S&F in repair metal flush box 1/2 module, complete all as specified and directed.

S&F in repair metal flush box 3 module, complete all as specified and directed.

S&F in repair metal flush box 4 module, complete all as specified and directed.

S&F in repair metal flush box 8 module, complete all as specified and directed.

S&F in repair metal flush box 12 module, complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 100mm x 100mm x 50mm deep, complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 175mm x 100mm x 50mm deep, complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 200mm x 150 and 50mm deep, complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 250mm x 200mm x 50mm deep, complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 350mm x 300mm x 50mm deep, complete all as specified and directed.

S&F in repair ceiling rose, 3 phase/PVC/polycarbonate, isolated body, complete all as specified and directed.

S&F in repair modular type 25 Amp power unit 4 module complete with 4 module plate, starter, plug & socket, complete all as specified and directed.

S&F in repair 5 in 1 switch & socket combination 15 Amp with and including PVC junction box, complete all as specified and directed.

S&F in repair 3 in 1 switch & socket combination 5 Amp with and including PVC junction box, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Tripple Pole & Neutral (TPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, including taking down old unserviceable DB, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, including taking down old unserviceable DB, complete all as specified and directed.

S&F MCB SPN 6 to 32 Amps, 240V, 10 KA, 'C' curve, fixed in proper position, including connection and testing, completes all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240V, 10 KA, 'C' curve, fixed in proper position, including connection and testing, completes all as specified and directed.

S&F MCB 4 pole, 63 Amps, 10 KA, 'C' curve, fixed in proper position, including connection and testing, complete all as specified and directed.

S&F PVC wall mounted fan 400mm sweep, white, with BLDC motor and remote including fixing arrangement on wall, complete all as specified and as directed.

S&F in replacement recessed mounted LED light fittings 36 watt (size 2' x 2'), white/warm white colour (4500 K to 6500 K) ultra modern LED edgelit luminaire 600mm x 600mm suitable for armstrong/grip/POP ceiling complete with seperate electronic driver and high brightess LED including LED lamp and connecting up with 3 core 2.5 Sqmm upto nearest point, complete all as specified and directed.

S&F bell electric, ding dong type, AC, 230 volt, single pole, complete all as specified and directed.

S&F electric bell, heavy duty, ding dong type, 230 volt, single pole, complete all as specified and directed.

Supply only 5 Amp, 3 pin plug top, 220 volts, complete all as specified and directed.

Supply only 15 Amp, 3 pin plug top, 220 volts, complete all as specified and directed.

S&F in replacement of LED driver for 36W/40W/42W (2' x 2') light fittings, complete all as specified and directed.

S&F in replacement of LED driver for 9W/12W/18W for LED panel fittings, complete all as specified and directed.

Note: An amount of Rs.39,688.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S. VINITA CONSTRUCTION (BID ID -3308994)

M/S MANODEEP CONSTRUCTION (BID ID -3308916)

SHRI SURAJIT SIKDER (BID ID -3308962)

M/S SANMILAN NANDI (BID ID -3308950)

M/S BIJAY KUMAR SHIVA (BID ID -3308942)

M/S BISHAL ENTERPRISES (BID ID -3308974)

BHARAT ELECTRIC (BID ID -3309096)