SPECIAL REPAIRS TO PERIMETER FENCING, ADDN/ALTN IN EXISTING BLDG NO T-48 AND CERTAIN MINOR WORK UNDER AGE B/R-II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n. exc 1.5 m in depth for foundation, etc and getting out in soft / loose soil complete all as specified and directed.

Excavation over areas not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas exceeding 1.5 m but not exceeding 3.0 m deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design Mix) using 20 mm graded crushed stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design Mix) using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design Mix) using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design Mix) using 20 mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design Mix) using 20 mm graded crushed stone aggregate Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttressescomplete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions,rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide, rough finished surface of concrete complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 22.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

S&F for Steel ventilator with top hung shutters including hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L for Damp proof course 40mm thick In cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces with using WPC as per manufacturer instructions including necessary formwork complete all as specified and directed. (Note: WPC shall be measured & paid seperately)

M&Lfor Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&Lfor Fly ash brick work with old size bricks, straight or curved on plan to any radius half brick thick built in In cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channels and drains including formwork complete all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 using WPC as per manufacturer's instructions in finishing layer on brick or concrete surfaces finished even & fair complete all as specified and directed. (Note;- WPC will be measured paid seperately as supply only).

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:3) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on stone other than fair faces of brick surfaces in CM 1:4 surface finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M&L for precast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified.

M&L for preparation of new surface of wall and three coat of white wash on walls complete all as specified and directed.

M&L for complete removal of existing treatment white wash /colour wash etc and preparation of plastered surfaces and applying two coats of colour wash on wall complete all as specified and directed.

M&L for two coat of wall care putty on wall including preparation of surface with sand paper etc. to obtain smooth surface complete all as specified and as directed

M&L for preparation of newly plastered surfaces and applying three coats of distemper dry of approved tint on wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper of approved tint on wall complete all as specified and directed.

M&L for two coats of cement base paint on wall, soffits of chajjas, cornices etc including prepration of plastered/unplastered surfaces complete all as specified and directed.

M&L cement concrete as in flooring 40 mm thick 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) finished surface even and smooth without using extra cement complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S&F 0.50 mm thick Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

S&F mild steel framed work such as Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, hold fasts, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete as specified and directed.

S&F Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes and similar work conforming to Fe-290 Gde E-165 complete as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc1.5 sqm but n exc 4 sqm each complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

Taking down cement plaster any description on brick or stone walls including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incluinf removal complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in roof coverings/ ridge all as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed.

Dismantling old barbed wire fencing fixed with ms wire all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel designed with 2mm thick moulded pre-laminated PVC sheet on the front face & 2mm plain colour PVC sheet on back face incl particle board core complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F anodised aluminium window (sliding three track) and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. (Note: Glass and wire mesh shall be measured and paid separately under respective items of BOQ/Sch 'A')

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 150mm length mild steel tee hinges, stove enamelled black, medium type, and fixed complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

S&F 100 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L for 100mm size rim latch with two levers, of mild steel body, stove enamelled finish; with brass knob or lever handle and fixed complete all as specified and directed.

S&F 4.00 mm thick figure glass, pin head type and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 3.00 mm thick figure glass, pin head type and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromiumplated bracket guard and railing 60 cm long complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set over 15mm thick screed in cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set over 15mm thick screed in cement mortar (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles 300x450mm size 7mm thick premium quality coforming to relevant IS as on dado incl 10mm thick plastering in CM(1:4) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

M&L for dark shade / double charged vitrified tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.36 sqm, in floors etc. set over 15mm thick screed in cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

ditto all as per item no 85.00 above but in skirting including 10mm thick plasrer in cement mortar(1:3) complete all as specified and directed.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

Dismantling of pipe 100 mm dia CI pipes jointed in cement mortar complete all as specified and directed.

S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trances or in floors complete all as specified and as directed.

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trances or in floors complete all as specified and as directed.

S&F 100mm bore Cast iron soil sand cast pipe, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 100 mm bore CI band (sand cast) any radius wirh oval access door including jointing with cement joints complete all as specified and directed.

S&F 75mm bore high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm fixed to wall or laid in trenches or under floor including fittings complete all as specified.

S&F 100mm bore high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm fixed to wall or laid in trenches or under floor including fittings complete all as specified.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified.

S&F PVC (SWR) vent cowl bore of pipe 75mm, complete all as specified.

S&F PVC (SWR) vent cowl bore of pipe 110mm, complete all as specified.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

M&L for 100mm bore cast iron pipes with flanged ends, centrifugally cast, class A, in any length laid in trenches complete all as specified.

S&F in repairs vitreous china wash hand basin flat back basin white size 550x400mm with counter sunk type including CP waste coupling 32mm bore, wase pipe 32mm bore, 750 long etc a pair of MS bracket and cutting for pinning in ends of brackets, waste chain & plug and porcelain stopper complete all as specified and directed.

S&F in repairs vitreous china wash down water closet European type (pedestal pattern) white (Excluding flushing cistern & flush pipe) including plastic water closet seat white, conncetion to out going pipe and flushing pipe complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve,float and handle including brackets capacity 10 ltr with flush pipe 32 mm dia complete all as specified and directed.

S&F in repairs PVC connection 15mm bore with 2 nos PTMT nuts 45cm long fixed with all as directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed

S&F MS tubes, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

S&F MS tubes, 'medium grade' ISI marked galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 20mm bore complete all as specified and directed.

Labour only for refixing steel water tubing 15mm bore medium grade galvanised with new fitting to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair hand shower (Health Faucet) ABS Body with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as specifed and as directed. Make - Jaquar Cat Part No. ALDCHR-593N or equivalent make of Kohler/ Cera

S&F rotational moulded polyethene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including dismanteling water tanks, two coat of white silicon paint complete all as specified and as directed.

S&F Ball valves 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) etc complete all as specified and directed.

S&F stop cock 15mm bore, cast copper, fancy type, chromium plated, long body with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Pillar taps, 15mm bore dia of pipe cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F In repairs Bib taps, 15mm bore cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F PVC waste pipe, 32mm bore, 750mm long complete all as specified and directed.

S&F for Soap dish brass CP complete all as specified and directed.

S&F repair CP tubular towel rail 600 mm long and 20mm dia icluding brackets etc complete all as specified and as directed.

M&L for Plain cement concrete 1:3:6 type C-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

M & L for concealed point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed.

All as per item No 124.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.

All as per item No 124.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

S&F single pole and neutral enclosure with a two pin and earth plug socket with double pole one MCB of upto 20 amp complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and as directed.

S&F indoor Luminaries decorative batten for wall/ceiling mounted box type energy effient saving LED 1x 10W - 2 feet, 230 V, including twin twisted copper conductor flexible wire from ceiling rose to connector complete all as specified and as directed. Make : C&S MODEL LTTB2F10WLEDP/ BAJAJ/SURYA

S&F Socket outlet multipurpose 3 pin, 15 Amp and 3 pin 6 Amp controlled by one switch complete all as specified and directed.

S&F Switch piano, flush button type, single pole, one way 5 Amp complete all as specified and directed.

S&F Socket outlet 5 pin, 5 Amp flush type complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, double door single pole & Neutral 4 way with common bus bar at incoming end complete all as specified and directed.

S & F wall security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 25X3 mm, 4 nos Anchor Bolt of suitable size etc all as specified and as directed. (Make : HAVELLS/PHILIPS/BAJAJ/CG)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through PVC conduit 25mm dia ISI marked complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm as earth continuity conductor drawn through PVC conduit complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

S&F sheet metal enclosure for MCCB, DBs, phosphatised, powder coated, single pole and neutral (SPN) 240 volt, double door, suitable for 2 way with dim rail earth and neutral bar complete all as specified and directed.

S&F MCB double pole upto 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F MCB double pole 40 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F in replacement Exhaust Fan of Size 380mm sweep, 230Volts AC, with louver shutter including cutting of hole in wall of suitable size and connection from existing ceiling rose to fan complete all as specified and directed.

S&F in replacement Exhaust Fan of Size 250mm sweep, 230Volts AC, PVC Body with louver shutter including cutting of hole in wall of suitable size and connection from existing ceiling rose to fan complete all as specified and directed.

Supply and fixing water heater (Geyser) storage type BEE 5 star rated AC 230 Volts of capacity 25 litres with Grounding of 4 Nut and Bolts,gasket and CP connecting pipe for outlet and inlet water from geyser complete all as specified and directed. Make V-Guard/ Havells/ Racold/BAJAJ/USHA.

S&F stop valve, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Cutting existing steel tubing for alterations or additions Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of size 15mm bore complete all as specified and directed.

Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 12,113.20 (refer Tender Srl Page No 37(R)). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

T K GANGULY

NAYAK BROTHERS

AVA STEEL INDUSTRIES

Paritosh Saha

M/S SEN CONSTRUCTION

BISWAJIT SAHA