Provn of Certain Special Repair Works at Old and New Mil Stn Kapurthala under GE Kapurthala

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces 450/x 350x7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement screed bed (1:4), complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone as in flooring 20-25mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone as in riser of steps, skirting, dado 20-25mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 incl, complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, and other similar situations, complete all as specified and directed by Engineer-in-Charge.

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises, complete all as specified and directed by Engineer-in-Charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engineer-in-Charge.

Use and waste of formwork to chajjas and similar items including edges rough finished, complete all as specified and directed by Engineer-in-Charge.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed by Engineer-in-Charge.

M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc, complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick work or concrete surfaces incl racking out joints, complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc, complete all as specified and directed by Engineer-in-Charge. Note:- WPC shall be paid separately.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper on ceiling over a coat of primer, complete all as specified and directed by Engineer-in-Charge. Note:- OBD to be done by Roller.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat of primer complete all as specified and directed by Engr-in-Charge. Note:- OBD to be done by Roller.

M & L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, ccomplete all as specified and directed by Engineer-in-Charge. Note:- CBP to be done by Sprayer.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper, complete all as specified and directed by Engineer-in-Charge. Note:- OBD to be done by Roller.

M&L for preparation of old plastered surfaces of walls and applying one coats of oil bound distermper, complete all as specified and directed by Engr-in-Charge. Note:- OBD to be done by Roller.

M&L applying two coats of cement base paint on old plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed by Engineer-in-Charge. Note:- CBP to be done by Sprayer.

Demolition of cement concrete of any description and in any position not otherwise specially provided for, complete all as specified and directed by Engineer-in-Charge.

M&L 75mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection finishing the surface even and smooth with out using extra cement, complete all as specified and directed by Engineer-in-Charge.

Applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/sqm including cleaning surfaces complete all as speciified and as directed by Engineer-in-Charge.

M&L PCC (1:5:10) type E2 using 40mm graded aggregate as in sub base, complete all as specified and directed by Engineer-in-charge.

M&L PCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 25 mm thick as for receiving top finishing layer of ceramic tiles for sunken portion finished even and smooth etc ccomplete all as specified and directed by Engineer-in-charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each, complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4sqm each, complete all as specified and directed by Engineer-in-charge.

Taking down shutters exc 1.00 sqm and n.exc 2.00 sqm, complete all as specified and directed by Engineer-in-charge.

Taking down shutters and refixing in same opening exc 1.00 sqm and n.exc 2.00 sqm, complete all as specified and directed by Engineer-in-charge.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening, complete all as specified and directed by Engineer-in-charge.

S&F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings, complete all as specified and directed by Engineer-in-charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed by Engineer-in-charge, size of frame 125 x 60mm filling hollow frame.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engineer-in-charge, size of frame 105 x 60mm filling hollow frame .

M&L PCC 1:3:6 type C2 as in filling of chowkhats, complete all as specified and directed by Engineer-in-charge.

S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters, complete all as specified and directed by Engineer-in-charge.

S&F framed work Fe 410-W(Gde-E-250)Quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering.Doors etc. to be prepared for hanging or sliding with and incl hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed by Engineer-in-charge.

S&F 25mm flush shutters in cupboards, solid core construction, with block board core and plywood face panels, commercial type both sides, complete all as specified and directed by Engineer-in-charge.

S&F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm, complete all as specified and directed by Engineer-in-charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm, complete all as specified and directed by Engineer-in-charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long, complete all as specified and directed by Engineer-in-charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm, complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer, complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer, complete all as specified and directed by Engineer-in-charge.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Handles of Z Sec 20mm x 100mm long (b) stopper – 01 No per leaf (c) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (d) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (e) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and directed by Engineer-in-charge and shown on drawings. Note:- Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar and paid separately.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and directed by Engineer-in-charge and shown on drawings. Note:- Wire mesh and painting shall be measured and paid separately under appropriate item etc, complete all as specified and directed by Engineer-in-charge.

S&F steel ventilators fixed type with glazing bars etc complete all as specified and directed by Engineer-in-charge.

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed by Engineer-in-charge.

S&F 4.00mm thick plain glass in squares n exc 0.5 sqm each pane and glazing with oil putty, complete all as specified and directed by Engineer-in-charge.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty, complete all as specified and directed by Engineer-in-charge.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden, complete all as specified and directed by Engineer-in-charge.

M&L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work, complete all as specified and directed by Engineer-in-charge.

S&F 300mm MS ordinary rat tail rod pattern helical springs including roller and roller plate, complete all as specified and directed by Engineer-in-charge.

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls, complete all as specified and directed by Engineer-in-charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed by Engineer-in-charge.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified and directed by Engineer-in-charge.

S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc, complete all as specified and directed by Engineer-in-charge.

S&F 20mm dia aluminium chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified and directed by Engineer-in-charge.

S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement, complete all as specified and directed by Engineer-in-charge.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm, complete all as specified and directed by Engineer-in-charge.

S&F in repairs for vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed by Engineer-in-charge.

S&F in repairs shower rose 100mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm), complete all as specified and directed by Engineer-in-charge.

S&F soap dish chromium plated heavy duty, complete all as specified and directed by Engineer-in-charge.

S&F in repair 25mm MS curtain rail powder coated with fixing brackets, stops, roller etc complete all as specified and directed by Engineer-in-charge.

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good, complete all as directed by Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes including all fittings complete all as specified and directed by Engineer-in-charge.

Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors, complete all as specified and directed by Engineer-in-charge.

S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-charge.

S&F 75 mm PVC (SWR) pipes in repair single socketed in any length laid in floor complete all as specified and directed by Engineer-in-charge.

S&F 75 mm PVC (SWR) bend complete all as specified and directed by Engineer-in-charge.

S&F 75 PVC (SWR) junction single,(single T) equal or unequal complete all as specified and directed by Engineer-in-charge.

S&F 75 PVC (SWR) junction double,(double T) equal or unequal complete all as specified and directed by Engineer-in-charge.

S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-charge.

S&F 110 mm PVC (SWR) bend with complete all as specified and directed by Engineer-in-charge.

S&F 110mm PVC(SWR) vent cowl, complete all as specified and directed by Engineer-in-charge.

Dismantiling water tank PVC 500 Ltrs and removing from site, complete all as specified and directed by Engineer-in-charge.

S&F rotational moulded polythelene water storage tanks (triple layer) cylindircal water tank for hoisted and fixed in postion of 500 ltrs capcity incl fittings, complete all as specified and directed by Engineer-in-charge.

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs, complete all as specified and directed by Engineer-in-charge.

S&F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms), complete all as specified and directed by Engineer-in-charge.

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs, complete all as specified and directed by Engineer-in-charge.

Demolition of mud in roof any thickness including plastering & leeping removed, complete all as specified and directed by Engineer-in-charge.

M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound as directed by Engr-in-Charge. Note:- W.P.C shall be measured and paid separately.

Supply only integral water proofing compound, complete all as specified and directed by Engineer-in-charge.

M&L preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm), complete all as specified and directed by Engineer-in-charge.

M&L for 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed by Engineer-in-charge.

All as per item no 93 above but except brick tiles complete all as specified and directed by Engineer-in-charge.

M&L cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed by Engineer-in-charge.

M&L for 40 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slab ccomplete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of walls and applying three coats of whitewash complete all as specified and directed by Engr-in-Charge.

M & L RCC 1 : 2 : 4, Type B-1 using 20 mm graded stone aggregate as in beams, lintels complete all as specified and directed by Engineer - in - Charge.

S&F TMT bars 6mm to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including mild steel wire (annealaed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-0 or Fe-410-0 all as specified and directed incl drilling to cement conc surface for fixing of reinforcement in position complete all as specified and directed by Engineer-in-charge.

All as per item No 99 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-in-charge.

Dismantling mild steel work as in roof purlin, complete all as specified and directed by Engineer-in-charge.

Dismantling asbestos cement sheet in roof covering, complete all as specified and directed by Engineer-in-charge.

M&L mild steel rolled section Fe 410-W (Gde-E-250) Quality A as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates, complete all as specified and directed by Engineer-in-charge.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /clading to wall and two corrugated side overlap fixed with self taping screws, complete all as specified and directed by Engineer-in-charge.

S&F rotational moulded polythelene water storage tanks three layered 1000ltrs capacity with threaded lid white colour hoisted and fixed in postion incl fittings, complete all as specified and directed by Engineer-in-charge.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :-

(a) One light point controlled by one, one way switch, complete all as specified and directed by Engr-in-Charge.

(b) One fan point controlled by one, one way switch, complete all as specified and directed by Engr-in-Charge.

(c) One socket outlet 3 Pin, 5 Amp on independent board, complete all as specified and directed by Engr-in-Charge.

(d) One socket outlet 3 Pin, 5 Amp on same board, complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board, complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 5 Amp, complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 15 Amp, complete all as specified and directed by Engr-in-Charge.

S&F socket out let 2 in 1, 3 pin 5 Amp flush type, complete all as specified and directed by Engr-in-Charge.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type, complete all as specified and directed by Engr-in-Charge.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface, complete all as specified and directed by Engr-in-Charge.

Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09W, complete all as specified and directed by Engr-in-Charge.

Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:-

(a) S & F of MCB, 10 to 32 Amp, SP, 240 Volt, complete all as specified and directed by Engr-in-Charge.

(b) S&F of MCB, 25 to 32 to Amp, SPN, 240 Volt, complete all as specified and directed by Engr-in-Charge.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-in-Charge. Note:- Three run of 6.00 Sqmm cable and one run of PVC Conduit shall be measured & paid as one unit.)

S&F in replacement Exhaust fans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable regulator & supply & fix electronic type fan regulator stepped type on existing phenolic laminated sheet etc suitable for ceiling fan, complete all as specified and directed by Engr-in-Charge.

G M BUILDERS 36