GE 874/EWS-35/2022-23

Amount

E/M Portion

Attending complaints for day to day/daily complaints by employed skilled staff, checking the serviceability of fan coil units and Air Conditioners of any capacity for having continous serviceability of FCU/ AC for any number of times as desired by Engr-in-charge incl replacement of minor spare parts like gasket, Electronoc boards and components, teflon tape, flare nut, tightening of any loose glycol connections, shifting FCU/ AC from one place to another place if required, heating up the freezed glycol line anywhere about the premises to have continous flow of glycol fluid, repairing the insulation pipes of any size by providing shallow pipe/ GI pipe as deemed fit for failing the insulation of pipe line,tightening the loose electrical connections as related with FCU/ AC,heating system, cleaning the air filter incl radiator of FCU to the entire satisfaction of Engr-in-charge all as directed. (i) Attending complaints of different nature in a single day in entire Grn incl ops room and MI room will be considered one job. (ii)Any replacement of major parts will be measured and paid seperately under respective items of Sch A.

(iii) Any nature of complaints related to FCU, radiator,bursting /cracking/leakage MS pipe lines, replacement of valves etc will be completed round the clock by suitable tradesman(welder with suitable T&P incl potable heating materials, skilled mech of CHS,plumber/fitter with helper, supervisor). (iv) Job slip will be maintained by the contractor supervisor under the supervision of JE E/M. (v) Any delay, of more than 48 hrs from intimation, in attending complaints will be reported to higher authorities and suitable penalities will be incurred from contractor( Rs 1000/- per job)

Disconnecting all electrical connection from central heating burner of make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and dismantling it from inlet opening central heating plant and set aside for repair and maintenance , removing wornout/defective spare parts and the replacement of following parts including servicing and testing on completion, complete all as specified. (Note :- Cost of spares/parts to be replaced will be measured and paid seprately as supply only under respective items mentioned here-in-below).

Supply only Ignition Transformer suitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only oil flow sequence controller suitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only Fuel feed pump suitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only Photocell suitable for burnersuitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only Nozzle suitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Supply only Solenoid valves suitable for burner make Ecoflame model No 83141558 25-10 minor 30.1 TLD min 15Kg/hr and max 28 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make - Ecoflame/ Suntec/ Siemen/CE/ Danfoss

Disconnecting all electrical connection from central heating burner of makeEcoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and dismantling it from inlet opening central heating plant and set aside for repair and maintanance , removing wornout/defective spare parts and the replacement of following parts including servicing and testing on completion, complete all as specified. (Note :- Cost of spares/parts to be replaced will be measured and paid seprately as supply only under respective items mentioned here-in-below).

Supply only Ignition Transformer suitable for burner make Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only oil flow sequence controller suitable for burner make Ecoflame Model Minor-14 DTC Max pressure 2 bar)and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Fuel feed pump suitable for burner make Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Photocell suitable for burner make Ecoflame Model Minor-14 DTC Max pressure 2 bar)and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Nozzle suitable for burner make Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Solenoid valves suitable for burner make Ecoflame model No 870114/2 48-05 minor 14 TDC min 9 Kg/hr and max 14.5 Kg/hr IP-40 and heating plant model No.WHW-200 capacity 200000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Disconnecting all electrical connection from boiler and dismantling burner of make Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 from inlet opening central heating plant and set aside for repair and maintenance , removing wornout/defective spare parts and the replacement of following parts including servicing and testing on completion, complete all as specified. (Note :- Cost of spares/parts to be replaced will be measured and paid seprately as supply only under respective items mentioned here-in-below).

Supply only Ignition Transformer suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only oil flow sequence controller suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Fuel feed pump suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Photocell suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Nozzle suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Supply only Solenoid valves suitable for burners Ecoflame Model 011/32 37-09 Minor 12.1 TL (L+S) min 6 Kg/hr and max 12 Kg/hr IP-40 bar and heating plant model No.WHW-100 capacity 100000 Kcal/hr Make Ecoflame/ Suntec/ Siemen/CE/ Danfoss.

Dismantling boiler of capacity 200000/ 100000 Kcal/hr by disconnecting all electric connections and unscrewing glycol tubing to isolate combustion chamber of boiler . Opening the inlet cover of Boiler by unscrewing the nut bolt and taking out the unserviceable coil made out of MS from the chamber with engagement of Tripod and chain pulley wihtout damaging internal chamber including cleaning of carbon content(scaling) to max clean with the help of heavy duty compressor including disposal of waste outside of cantonment area and replacement of damage parts of boiler complete all as directed by Engr-in-charge. (Note :- Cost of spares/parts to be replaced will be measured and paid seprately as supply only under respective items mentioned here-in-below).

Supply only burnt fire crete matti all as specified.

Supply only asbstos foam for insulation of Gi tubing all as specified.

Supply only Inner glycol tubing as per sample all as specified.

Supply only Inner Piping Glass as per sample all as specified.

Supply and fixing of Asbestos Rope on Exhaust of bioler central heating plant up to wall all as specified and directed.

Material and labour for replacment of pressure guage suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified.

Material and labour for replacment of Transperent Fuel Filter suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified.

Material and labour for replacment Fuel pipe for fuel pump suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified.

Material and labour for replacment Fuel tee suitable for heating plant model No.WHW-200 and WHW-100 as per sample all as specified.

Supply and fix butterfly gate valve 80 mm dia having nitrate seat and epoxy coated disc CI with hand leaver pressure rating PN 1.0 complete all as specified and as directed. Make - C&R/ kirloskar/ Zoloto.

Supply and fix air release valve (ARV) to automatically release trapped air from a heating system 25mm dia. complete all as specified and as directed. Make - C&R/ kirloskar/ Zoloto.

Disconnecting all electrical connections from blower and motor of Air handling unit at 428 FD HOSP (Make thermax) blower compartment incl dismantling of all pre filters, microfilters,aluminium perforated sheet over glass fibre wool panels , blowermotor incl connecting after repair / replacements of following parts including servicing and testing on completion, all as specified and directed by Eng-in-charge. (Note :- Cost of spares/parts to be replaced will be measured and paid seprately as supply only under respective items mentioned here-in-below).

Supply only prefilters having aluminium frame as per sample.

Supply only Micro filters having aluminium frame as per sample.

Supply only aluminium perforated sheet panel over 50 mm thick glass fibre wool as per sample.

Supply only centre bearings for blower shaft incl CI housing all as per sample.

Supply only V belts size B77 as per sample all as specified.

Supply only foam for AHU Shatters as per sample all as specified.

Repair of rediator checking for leakage of copper tubes and discaling of Glycol tubing including welding bleasing as requaired at site.

Cleaning the chimney of heating plants from inside with wire brushes and removing away all carbon deposited and painting the outer surface of the chimney with two coats of heat proof black paint after preparing the surface for repainting complete all as directed.

Supply and fixing in replacement decorative wall mounted fan coil units of capacity 4500 Kcal/Hr CFM 470 complete with grill, ESB casing 3 speed motor, wall mounting brackets inlet out let mainfold all as directed and specified by Engr-in-Charge. Make - Western Model No WFC-4 or equivalent in Caryaire/ zeco/ airflow.

Repair of damages in CHS pipeline system with SMAW/ GMAW/ GTAW welding work, including electrodes/ filler material, for one damage of upto 2 meters long on the pipeline complete all as directed.

Supply and laying, connecting, fixing and testing in replacement of 3 layer poly propylene random copolymer composit pipes 25mm/20mm bore OD pipe conforming to PN1.6 complete with fittings duly insulated with 13mm thick closed cell elastomeric insulation 30 to 40 Kg/m3 density all as directed and specified by Engr-in-Charge.

M & L for Insulation of M S Pipe 25 mm with PUF slab 30 mm thick and GI cladding with 26 gauge GI sheet complete all as specified and directed by Engr-in-Charge.

M & L for Insulation of M S Pipe 32 mm with PUF slab 30 mm thick and GI cladding with 26 gauge GI sheet complete all as specified and directed by Engr-in-Charge.

Supply & fixing in replacemnet of gun metal steam stop valve of 20mm bore screwed on both ends. Make : Sant, Zoloto, VBI.

Supply & fixing in replacement of gun metal steam stop valve of 15mm bore screwed on both ends. Make : Sant, VBI, Zoloto.

Supply and fixing in replacement Heavy duty wiremesh bounded fuel pipe with flare nut both ends 600 mm length as per sample complete all as directed by Engr-in-charge.

Supply and fixing in replacement fuel filter element as per sample complete all as directed by Engr-in-charge.

Supply and fixing in replacement Nitrile foam insulation over CHS MS ERW heating pipes, of size 4" ID X 3/4 " TK ( 102 mm x 19mm ) all as specified and directed. Make : Superlon, Sant.

Supply and fixing in replacement Nitrile foam insulation over CHS MS ERW heating pipes, of size 3 1/8" ID X 1/2 " TK ( 80 mm x 13mm ) all as specified and directed. Make : Superlon, Sant.

Repair and maintenance of wall mounted type Fan coil unit ( Inner Unit complete) of make Western modle - WFC-04/ WFC-3000 after disconnecting electric connections including servicing and washing of condensor and replacement of following parts with existing make (Capacity upto 4500Kcal/Hr) and specifications as approved by the Engineer-in-charge: Note :- The cost of labour for repair and replacement of worn out/defective spare parts included in this item and parts to be replaced shall be measured and paid separetely and minor part included with this like tap roll etc.

Supply, Installation, Commissioning and testing of Blower motor for FCU of make Western model No WFC-04/ WFC-3000.

Supply, Installation, Commissioning and testing of PCB for FCU of make Western model No WFC-04/ WFC-3000 and for Air Conditioner of capacity upto 2 ton.

Supply, Installation, Commissioning and testing of Display Board for FCU of make Western model No WFC-04/ WFC-3000.

Supply, Installation, Commissioning and testing of Nozzle Sets for inner units for FCU of make Western model No WFC-04/ WFC-3000, as per sample.

Supply, Installation, Commissioning and testing of Pressure Valve for inner units for FCU of make Western model No WFC-04/ WFC-3000, as per sample.

Supply, Installation, Commissioning and testing of Steel Rings for stopage of leakage in inner units pipe for FCU of make Western model No WFC-04/ WFC-3000, as per sample.

Supply and fixing 32mm bore gun metal globe gate valve (ISI marked) iron wheel head,screwed both ends for iron pipe fixed in repair complete.Make - Kirloskar/ BVI /L&T/Leader.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M & L for point wiring for One light /one fan/one bell point controlled by one switch with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping or conduit pipes, with wooded or white coloured casing caping (as directed and specified) including accessories and provinsing of PVC boxes for mounting switches, switch socket, fan regulator, provn of modular terressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly. Make of wire :-Havells/ Finolex/L&T. Make of casing caping- Poly plast/ pressfit/ Presto plast.

All as per item no. 64 above but for One socket outlet 5 pins 5 amps controlled by one switch on same board, complete as directed by engineer in charge.

All as per item no. 64 above but for One socket outlet 5 pins 5 amps controlled by one switch on independent board complete as directed by engineer in charge.

All as per item No 64 here in before but wiring with 2.5 sqmm copper wire ( FR) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete as directed by engineer in charge.

S&F switch piano flush button single pole, one way 5 amps complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells.

S&F socket outlet multi 5 pins 5 amp, complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells.

S&F switch socket combination 2 in 1, 5A flush type, complete as directed and specified by engineer in charge.

S&F switch piano flush button single pole, one way 15amps, complete as directed and specified by engineer in charge. complete all as specified and directed. Make - Anchor/Plaza/Cona.

S&F socket outlet 2 in 1, 6 pins 15 amp, complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells.

S & F switch socket combination 3 pin 16A, flush type, complete as directed and specified by engineer in charge.

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells.

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate (back plate of wooden or white pattern) suitable for batten/wall fitting of wooden pattern or white, complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells.

Supply and Fix only stepped type electronic fan regulator 1 module, complete as directed and specified by engineer in charge. Make : Anchor/Cona/SSK.

M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white colour casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

M & L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLS) ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white coloured casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 2.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

S&F sheet metal enclosure for DBs (single door type), wooden enamel finish or painted (as specified and directed), when MCBs to be used single pole and neutral 12 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

S&F sheet metal enclosure for DBs (single door type), wooden enamel finish or painted (as specified and directed), when MCBs to be used single pole and neutral 8 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

S&F sheet metal enclosure for DBs (single door type), wooden enamel finish or painted (as specified and directed), when MCBs to be used single pole and neutral 4 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.Make: Havels /Legrand L&T.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, all as specified and as directed by Engr -in-Charge. Make : Leggrand/Havells/HPL.

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. Make : Legrand, Havells/HPL.

S & F in replacement LED light fitting 1x9W/1X10Wbulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make:-Havells/Syska/Wipro.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make:-Havells/Syska/Wipro.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed. Make:-Havells/Syska/Wipro.

Supply and fixing in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.all as specified and directed. Make:-Havells/Syska/Wipro.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make:- Havells/Syska/Wipro.

S&F Bed side designer lamp, 5 watts, with LED lamp, including all wiring and switches required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.

Supply and fix in replacement Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED 20W B22 basewitth 1x20 watt LED lamp complete all as specified and directed by Engr-in-charge . Make Havells, Philips ,C&S .

Supply and fix in replacement unique LED flood/ focus light 70 W LED 6500 K with IP 65 protection complete all as specified and directed by Engr-in-charge Make Havells, Philips, C&S.

M&L rewinding of Exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor 4 mfd, by replacing petty items such as nuts & bolts, bearing & washer, cleaning of exhaust fan body and its blade by cleaning agent, assembling and connecting testing all as specified and as directed by Engr-in-Charge.

M&L rewinding of ceiling fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 1200 /1400 mm sweep by dismantling its parts, capacitor by replacing petty items such as split pins,clamps, nuts & bolts, bearing & washer both end of down rod, cleaning of fan body and its blade by cleaning agent, assembling and connecting testing all as specified and as directed by Engr-in-Charge.

Painting of ceiling/ exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

S&F in replacement LED luminaire 220x220mm, 18/20 Watt, 220 Volt AC Surface mounting type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof /ceiling including connecting up with driver 3 core flexible copper conductor of suitable size complete.

Supply and fixing ball bearing suitable for Ceiling and exhaust fan of any sweep and make complete. Make : TATA/NBC/SKF.

Supply and fixing gun metal bush suitable for any sweep fan of any make.

Supply and fixing of Capaciter 2.5/3/4 mfd. Make- USHA/ASIAN/EPCOS.

Supply and Replacement of unsv heating helemant with new one capacity of 1500 Watts (triangle type) for 25 Ltr geysers.

Supply and Replacement of unsv heating elemant with new one capacity of 2000 Watts for 25 Ltr geyser(triangle type).

Supply only of unsv heating helemant with new one capacity of 3000 Watts for 225 Ltr geyser.

Repair/Replacement of Thermostat 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

Repair/Replacement of copper Geyser Assembly with rubber paking for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

S & F and testing of compressor for split type air conditioner of capcity 1.5/2 ton and taking down of UNSV compressor, all as specified and directed by Engr-in-charge Make of AC - LG, Samsung.

S & F and testing of thermistor (temprature Sensor) for split type air conditioner of capcity 1.5/2 ton and taking down UNSV Blower, all as specified and directed by Engr-in-charge make of AC - LG, Samsung.

S & F and testing of PCB for split type air conditioner of capcity 1.5/ 2 ton and taking down UNSV PCB, all as specified and directed by Engr-in-charge make of AC - LG, Samsung.

S & F and testing of Blower for split type air conditioner of capcity 1.5/2 ton and taking down UNSV Blower, all as specified and directed by Engr-in-charge make of AC - LG, Samsung.

S & F and testing of transformer for split type air conditioner of capcity 1.5/2 ton and taking down UNSV Blower, all as specified and directed by Engr-in-charge make of AC - LG, Samsung.

S & F and testing of out door unit fan blade for split type air conditioner of capcity 2/ 1.5 ton and taking down UNSV Sensor, all as specified and directed by Engr-in-charge. Make of AC : LG, Samsung.

S & F and testing of outer unit fan of split type air conditioner of capcity 1.5/2 ton and taking down of UNSV fan, all as specified and directed by Engr-in-charge. Make of AC : LG, Samsung.

S & F and testing of 2 Way Valve Assembly of split type air conditioner of capcity 1.5/2 ton and taking down of UNSV fan, all as specified and directed by Engr-in-charge. Make of AC - LG, Samsung.

Supply and fixing of Capaciter 50 MFD for 1.5 / 2 ton AC complete all as specifide and directed.

M&L for Repair and replacment unserviceable wornout/ Burnt parts of Voltage Stablizer upto 10 KVA of any make complete all as specified and directed by Engr-in-charge.

Supply and refilling of gas R-22/ R-410/R32/ R134a for split/ window/ central package type Air conditioners and Refrigerators incl checking and fixing leakage complete all as specified and directed by Engrs-in-charge.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

VEDA INFRASTRUCTURE

GH MOHD SHAH AND CO

POPULARHARDWARESTORE

Bidder Name

POPULARHARDWARESTORE

GH MOHD SHAH AND CO

VEDA INFRASTRUCTURE

M/S MOHD MAQBOOL RATHER