GENERAL FUND

Amount

Removeing the old damage mangalore tiles andstocking at site for remeasurement and reuse the rate including cost and conveyance of all materials and labour charges etc., complete complying with standard specifications.

Roofing with policarnate sheet and the rate including cost and conveyance of all labour charges etc. Complete complying using standard specification.

Roofing with Old Mangalore tiles with required timbers and the rate including cost and conveyance of all materials and labour charges etc., complete complying with standard specifications.

Roofing with New Mangalore tiles with required timbers and the rate including cost and conveyance of all materials and labour charges etc., complete complying with standard specifications.

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

Paintinting two coats for old wood work surface using best quality synthetic enamel paint etc complete complying with standard specification - 10m2

Brick work in cement Mortar – 1:5 mix using best country Bricks and the rate including cost and conveyance of all materials and labour charges etc. Complete complying with standard specification.

Plastering in cm 1:5 mix to 12mm thick and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Supply and fixing in position 22" Indian type water closet with foot reset includes "P" (or) "S" trap including cost and conveyance of all materials to site and all labour charges etc., to complete as per std.,specifications.

34) Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 10.00 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.

FLOORING with scratch proof CERAMIC TILES of approved quality and colour of size 305*305*6 mm in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments at 4.00 kg/m2 etc., complete complying with standard specification.

Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B' Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Provision for Entry wood Door with Frame Polishing and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Provision for TV unit and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Provision for Dressing unit and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Provision for Decretive Ceiling work Including Light Fitting and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Provision for Wood cot Renovating Including Light Fitting and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Provision for Wardrode Including Light Fitting and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Provision for Dining Table

RAVI V (BID ID -1104927)