Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.9 LAccepted-AOC SAHEBPARA RAOD UPPER BAGDOGRA P O BAGDOGRA DISTRICT DARJEELING WEST BENGAL PIN 734014 | BAGDOGRA | DARJEELING | WEST BENGAL | 734014 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹22.5 L+₹1.9 L (9.33%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
18 Jan 2020, 12:00 pmClosed
GE BENGDUBI
Bengdubi Military Station PO-Bengdubi, Dist-Darjeeling, Pin 734424
GE/BENE/43 OF 2019-20 REPAIR/RENEWAL OF ELECTRIC WIRING SYSTEM AT SUB AREA, STN HQ, TPT COY, PRE-NURSARY SCHOOL, MES IB, MIL-II EXCHANGE, SA OFFRS MESS, ASHA KIRAN RESIDENCY, SPORTS/ SHOPPING COMPLEX, CSD AND APS UNDER GE BENGDUBI MIL STN
2019_MES_307062_1
GE/BENG/43 OF 2019-20
Open Tender
Civil Works
Item Rate
270 days
GE BENGDUBI
MES Enlisted/ Un-enlisted contractor of Class E and above category b(i) i.e. Low Tension Electric Works(upto 1100 Volts)
9 documents required · 9 mandatory
₹500
Yes
GE BENGDUBI
₹50,000
Yes
27 Jan 2020
17 Dec 2019
20 Jan 2020
17 Dec 2019
18 Jan 2020
31 Dec 2019
18 Dec 2019 - 21 Dec 2019
Amount
SCHEDULE 'A'
Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and directed.
Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site complete all as specified and directed. (Note : To be measured only when found serviceable in all respects complete for reuse)
Material and labour for point Wiring with 1.5 Sqmm (Nominal Area)FRLS PVC insulated unsheathed 1100 Volts Grade stranded Copper Conductor Cable (Red Colour Cable for Phase and Black Colour Cable for Neutral), laid in and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia with Accessories including 1.50 Sqmm FRLS PVC insulated Stranded Copper Conductor Cable (Green Colour) as Earth Continuity Conductor and connected to Common Earth Dolly and CI/pressed steel terminal box with 3.00 mm thick laminated sheet cover fixed on Wall for One light point or one fan point controlled by one switch including necesary Cutting chases in brick walls for concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed.
All items as per Ser No 3.00 here-in -before but for One 3 pin socket out let 5 Amps on independent board complete all as specified and directed.
All items as per Ser No 3.00 here-in -before but for One 3 pin socket out let 5 Amps on same board complete all as specified and directed.
M & L for concealed point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent.
M & L for point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc, One light point controlled by 2-way switch complete all as specified and directed.
All items as per Ser No 7.00 here-in -before but One light point or one fan point or bell point controlled by one switch complete all as specified and directed.
All items as per Ser No 7.00 here-in -before One 3 pin socket outlet, 5 Amp independent complete all as specified and directed.
All items as per Ser No 7.00 here-in -before One 3 pin socket outlet, 5 Amp on the same board with other switches complete all as specified and directed.
M & L for point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.
S & F Switch piano, flush button, 5/6 Amps, single pole, two way, 230 Volts complete all as specified and directed.
S & F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.
Fixing only Switch piano any type (as retrived against item Ser No 2 here-in-before) complete all as specified and directed.
S & F Socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and directed.
Fixing only Socket outlet 5 Amp any type(as retrived against item Ser No 2 here-in-before) complete all as specified and directed.
S & F Switch socket combination 2 in 1, 5 Amp flush type complete all as specified and directed.
Fixing only Switch socket combination 2 in 1, 5 Amp flush type (as retrived against item Ser No 2 here-in-before) complete all as specified and directed.
S & F Switch socket combination 5A/ 16A, 5 in 1flush type complete all as specified and directed.
Fixing only Switch socket combination 5A/ 16A, 5 in 1flush type (as retrived against item Ser No 2 here-in-before) complete all as specified and directed.
S & F Bell push, flush type, 5 amp complete all as specified and directed.
Fixing only Bell push (as retrived against item Ser No 2 here-in-before) complete all as specified and directed.
S & F Bell , AC, 230 Volts, single pole complete all as specified and directed.
S & F Ceiling rose, 3 way PVC insulated body complete all as specified and directed.
Fixing only Ceiling rose any type (as retrived against item Ser No 2 here-in-before) complete all as specified and directed.
S & F stepped type electronic fan regulator flush type (2-Module) 120 watt complete all as specified and directed.
S & F LED Tube Light luminaries with high performance LED with driver 1 x 18W (4 Feet long, Cool day/Warm white) complete all as per Cat Part No -LCTL-18-CDL of make Crompton or equivalent model of Philips / Bajaj /surya
S & F LED Tube Light luminaries with high performance LED with driver 1 x 9W (2 Feet long, Cool day/Warm white) complete all as per Cat Part No -LCTL-9-CDL of make Crompton or equivalent model of Philips / Bajaj /surya
S & F Decorative CITY 1 wall light fixture made up of Polycarbonate suitable for 10 W LED lamp (B22) includin 10W LED Bulb etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexiblecopper conductor cable with suitable size complete all as specified and directed.
S & F CFL light fitting,1x10W LED bulk head luminaries IP65, complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V,50HZ complete all as specified and directed. Cat Part No - LBHP-10-CDL, Make: Crompton or equivalent model of Philips / Bajaj /surya
S & F Building security LED light luminaire fitting 1X20 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 25X3 mm , 4 nos Anchor Bolt of suitable size etc all as specified and directed. (Make CG MODEL LST 20 CDL/ SURYA MODEL SLE UL 20 W IP65 LXN)
S&F Lamp holder , PVC / Polycarbonate type with back plate suitable for B22 lamp including 8 Watt LED Bulb complete all as directed
S&F 12W LED Round/Square surface mounted downlighter including suitable driver & all accessories to fixed on Ceiling/Wall all as specified & directed. Cat part No LCDSPLN-R/S-12-CDL/WW of make: Crompton or Equivalent model of Philips/ Surya/ Havells / Bajaj/ CG.
S&F 12W LED Round/Square recessed mounted downlighter including suitable driver, cutting of False ceiling as required and all accessories for fixing arrangement all as specified & directed. Cat part No LSCR/SM-12W-CDL/NW/WW of make: Crompton or Equivalent model of Philips / Surya/ Havells / Bajaj / CG.
S&F 36W LED Square Type 2' x2' recessed mounted downlighter including suitable driver, cutting of False ceiling as required and all accessories for fixing arrangement all as specified & directed. Cat part No LCPL-36-CDL (2x2) of make: Crompton or Equivalent model of Philips /Surya /Havells /Bajaj /CG.
Fixing only serviceable light fitting any type (as retrived against item Ser No 2 here-in-before) complete all as specified and directed.
Taking down of Old MCB DB / control box any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site complete all as specified and directed.
S & F sheet metal enclosure for MCB, DBs, Vertical type, double door, phosphatised, Powder coated , Triple Pole and Neutral (TPN), fixed flush to wall , IP 30 and IK 08 Protection Grade, including adjustable type MCCB as incoming of capacity 100Amp,4 pole with breaking capacity 25kA, 4 way, Double door 415 Volts all as specified and directed. Make: Legrand Cat No507740. or equivalent of Hager/Siemens.
S & F Sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way with common bus bar at incomming end complete all as specified and directed.
S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed.
S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 4 way with common bus bar at incomming end complete all as specified and directed.
S & F Sheet metal enclosure for MCB DB Single door single pole & Neutral 2 way without busbar complete all as specified and directed.
Refixing of MCB DB any type complete all as specified and directed.
S & F MCB Four pole, 415 volts, 40-63 Amps, breaking capacity 10KA Cat No 408700-02, make: Legrand or equivalent model of L&T, C&S, Indoasian
S & F MCB 'C' series Double pole 6 to 32 Amps, breaking capacity 10KA, Cat No 408628-36, make: Legrand or equivalent model of L&T, C&S, Indoasian
S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA, Cat No 408587-95, make: Legrand or equivalent model of L&T, C&S, Indoasian
Refixing of MCBs any size any type complete all as specified and directed.
Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.
M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through PVC Conduit complete all as directed by Engr-in-Charge (Note :- (a) Taking down of Old U/S Submain/PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)
M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through PVC Conduit complete all as directed by Engr-in-Charge (Note :- (a) Taking down of Old U/S Submain/PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)
M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through PVC conduit complete all as directed by Engr-in-Charge. (Note :- (a) Taking down of Old U/S Submain/PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)
M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 1.5 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 1.5 sqmm as earth continuity conductor drawn through PVC conduit complete all directed. (Note :- (a) Taking down of Old U/S Submain/PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)
S & F in replacement Switch piano, flush button, 5/6 Amps, single pole, two way, 230 Volts complete all as specified and directed.
S & F in replacement Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.
S & F in replacement Socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and directed.
S & F in replacement Switch socket combination 2 in 1, 5 Amp flush type complete all as specified and directed.
S & F in replacement Switch socket combination 5A/ 16A, 5 in 1flush type complete all as specified and directed.
S & F in replacement Bell push, flush type, 5 amp complete all as specified and directed.
S & F in replacement Bell , AC, 230 Volts, single pole complete all as specified and directed.
S & F in replacement Ceiling rose, 3 way PVC insulated body complete all as specified and directed.
S & F in replacement stepped type electronic fan regulator flush type complete all as specified and directed.
S & F in replacement Modular Switch 1 way 6 A, 1 module complete all as specified and directed.
S & F in replacement Modular Switch 1 way 16 A, 1 module complete all as specified and directed.
S & F in replacement Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.
S & F in replacement Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.
S & F in replacement Modular Regulator Step Type 120 watt, 2 module complete all as specified and directed.
S & F in replacement Modular Blank plate, 1 module complete all as specified and directed.
S & F in replacement Modular type White cover plate with frame 2 module complete all as specified and directed.
S & F in replacement Modular type White cover plate with frame 3 module complete all as specified and directed.
S & F in replacement Modular type White cover plate with frame 4 module complete all as specified and directed.
S & F in replacement Modular type White cover plate with frame 6 module complete all as specified and directed.
S & F in replacement Modular type Metal Flush box 2 module complete all as specified and directed.
S & F in replacement Modular type Metal Flush box 3 module complete all as specified and directed.
S & F in replacement Modular type Metal Flush box 4 module complete all as specified and directed.
S & F in replacement Modular type Metal Flush box 6 module complete all as specified and directed
S & F in replacement LED Tube Light luminaries with high performance LED with driver 1 x 18W (4 Feet long, Cool day/Warm white) complete all as per Cat Part No -LCTL-18-CDL of make Crompton or equivalent model of Philips / Bajaj /surya
S & F in replacement LED Tube Light luminaries with high performance LED with driver 1 x 9W (2 Feet long, Cool day/Warm white) complete all as per Cat Part No -LCTL-9-CDL of make Crompton or equivalent model of Philips / Bajaj /surya
S & F in replacement Decorative CITY 1 wall light fixture made up of Polycarbonate suitable for 10 W LED lamp (B22) includin 10W LED Bulb etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S & F in replacement 1x10W LED bulk head luminaries IP65, complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V,50HZ. Cat Part No - LBHP-10-CDL, Make: Crompton or equivalent model of Philips / Bajaj /surya
S & F in replacement Building security LED light luminaire fitting 1X20 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 25X3 mm , 4 nos Anchor Bolt of suitable size etc all as specified and as directed. Make CG MODEL LST 20 CDL/ SURYA MODEL SLE UL 20 W IP65 LXN.
S & F in replacement Lamp holder , PVC / Polycarbonate type with back plate suitable for B22 lamp including 8 Watt LED Bulb complete all as directed.
S&F in replacement 12W LED Round/Square surface mounted downlighter including suitable driver & all accessories to fixed on Ceiling/Wall all as specified & directed. Cat part No LCDSPLN-R/S-12-CDL/WW of make: Crompton or Equivalent model of Philips/Surya/Havells/Bajaj/CG.
S&F in replacement 12W LED Round/Square recessed mounted downlighter including suitable driver, cutting of False ceiling as required and all accessories for fixing arrangement all as specified & directed. Cat part No LSCR/SM-12W-CDL/NW/WW of make: Crompton or Equivalent model of Philips/Surya/Havells/Bajaj/CG.
S&F in replacement 36W LED Square Type 2' x2' recessed mounted downlighter including suitable driver, cutting of False ceiling as required and all accessories for fixing arrangement all as specified & directed by Engr-in-Charge. Cat part No LCPL-36-CDL (2x2) of make: Crompton or Equivalent model of Philips/Surya/Havells/Bajaj/CG.
S & F in replacement LED bedside light fitting with 180O swivel and in-built on-off switch complete all as specified and directed.
S&F in replacement 50W LED Flood Light including suitable driver, nut, botls, washer, bracket & clamps (made out of MS angle of size 0.5 meter) etc all as specified & directed by Engr-in-Charge. Cat part No BVP 161 LED 43 NW/WW 50W of make: Philips or Equivalent model of Crompton/Surya/Havells/Bajaj/HPL.
S & F in replacement LED Gate light 30 Watt CDL, Cat Part No. SLE PT 30W - ETPP of Make-Surya or Equivalent model of philips /Havells /Crompton/ HPL all as specified and as directed.
S & F in replacement LED SPOT light with spike 15 watt CDL/Warm White adjustable type Make philips/Havells/surya/Crompton/HPL all as specified and directed.
S & F in replacement PL-L Lamp 36 Watt (4 pin) in any type of PL-L lamp fittingst of any type and size all as specified and directed.
S & F in replacement PL Lamp 9/11/18 Watt in any type of PL lamp fittingst of any type and size all as specified and directed.
S & F in replacement 36 W T8 FTL rod Cool day light all as specified and directed.
Taking down fan, sealing cable end, dismantling blades and removing fan & blades, painting (white) with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, marking same MES No. with permanent Marker etc and hanging the ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
S & F in replacement MS Box in concealed of any type and any size complete all as specified and directed.
S & F in replacement PVC hylum sheet 3mm thik top cover of size 300 x 250 x 3 mm all as specified and directed.
S & F in replacement PVC hylum sheet 3mm thik top cover of size 250 x 150 x 3 mm all as specified and directed.
S & F in replacement PVC hylum sheet 3mm thik top cover of size 100 x 100 x 3 mm all as specified and directed.
S & F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 250 x 200 x 50 mm deep complete all as specified and directed.
S & F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 200 x 150 x 50 mm deep complete all as specified and directed.
S & F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 150 x 100 x 50 mm deep complete all as specified and directed.
S & F in replacement flexible wire 2 core copper size 1.5 sqmm complete all as specified and directed.
S & F in replacement Capacitor 2.5 Mfd 220 volts complete all as specified and as directed by Engineer-in charge.
S & F in replacement Single Pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 16/25Amp complete all as specified and directed.
S & F in replacement moulded case circuit breaker four pole 415 volts 50 c/s 100 A breaking capacity 25 KA adjustable type including taking out u/s complete all as specified and directed. (Make - Legrand /Abb/Havells/hagar/C&S
S & F in replacement MCB Four pole, 415 volts, 40-63 Amps, breaking capacity 10KA complete all as specified and directed, Cat No 408700-02, make: Legrand or equivalent model of L&T, C&S, Indoasian
S & F in replacement MCB 'C' series Double pole 40 to 63 Amps, breaking capacity 10KA complete all as specified and directed. Cat No 408637-39, make: Legrand or equivalent model of L&T, C&S, Indoasian
S & F in replacement MCB 'C' series Double pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Cat No 408628-36, make: Legrand or equivalent model of L&T, C&S, Indoasian
S & F in replacement MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Cat No 408587-95, make: Legrand or equivalent model of L&T, C&S, Indoasian
Cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed.
Cutting opening in cement concrete walls (any description) including trimming surfaces for fixing of MCB DBs or Main Switches or Exhaust Fans or at any other indicated situation complete all as specified and directed.
M&L for providing cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) for fixing of 50 mm bore GI pipe between walls or MCB DB complete all as specified and directed.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for cable trenches and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed.
Removing excavated materials (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and directed.
M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness, complete all as specified and as directed.
Supply & Laying Sub-Class, old size, B Bricks, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion laid for UG cable protection complete all as specified and directed.
Taking out Old un-serviceable / faulty cable of any size from trench / pole all as directed.
M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 25 Sqmm 3.5 core laid in trench/pole/on wall completer all as specified and directed.
S & F 1100 Volts grade heavy duty cable PVC insulated Aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection twin core 10 Sqmm cable flate or Circular complete all as specified and directed.
S & F in replacement Ceiling Fan of Size 1200mm sweep, 230Volts AC with connection from existing ceiling rose including taking down Old fan and deposting to MES store yard complete all as specified and directed.
S & F in replacement Exhaust Fan of Size 250mm sweep, 230Volts AC, PVC Body with connection from existing ceiling rose including taking down Old fan and deposting to MES store yard complete all as specified and directed.
S & F in replacement Exhaust Fan of Size 300mm sweep, 230Volts AC, Metal Body with connection from existing ceiling rose including taking down Old fan and deposting to MES store yard complete all as specified and directed.
S & F in replacement Wall Fan of Size 400mm sweep, 230Volts AC with connection from existing ceiling rose including taking down Old fan and deposting to MES store yard complete all as specified and directed.
S & F in replacement Geyser 25 ltr capacity vertical type with BEE 5 star rating, having working pressure 8.0 Kg/cm² (max), electric water heater with ABS cover outer body 3mm EPAC (Engineered Polymer Anti Corrosion) coated inner tank to suit any kind of water, interchangeble colour panel, vitreous enamel coated incoloy heating element for long life, adjustable capilary thermostat for temparature regulation, multifunctional safety valve etc and fixing along the wall using suitable anchor bolts, nuts, washer complete all as specified and directed. (Make-Usha Model-Mysty or Equivalent model of V-Guard/ Racold/ Havells/Bajaj) [Note:- Old U/S Geyser shall be deposited to MES stores for ledger and disposal action accordingly.]
Taking down of wiring/Submain wiring upto size three phase 10.0 sqmm and refixing the same through new/ existing casing-caping or conduit for distribution of balanced elect load at any indicated situation complete all as specified and directed (Note: PVC casing-capping or PVC conduit shall be measured and paid under separatelyunder respective item of Sch 'A'/BoQ)
Supply only PVC Casing-Caping of size 25mm.
Supply only PVC Concduit of size 20mm.
Supply only PVC Concduit of size 25mm.
M&L for advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly and having RoHs certification . GI Electrode Shall be tested from CPRI.The earting pit should be cover with pcc(1:2:4 , B1) cover ,of 450 x 450 mm complete all as specified and directed make ASHLOK / INDELEC/JMV /TERCEL.
(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 41159.35.00 (refer Tender Srl Page No 36). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’
GOUTAM KUMAR GHOSH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .